| Title | Size | Downloads |
|---|---|---|
| H3C_LSQM1TGS24QSFD0 Card Manual-6PW104.pdf | 36.95 KB |
- Table of Contents
- Related Documents
-
24-port 10GBASE-R-SFP+
optical Ethernet
interface card—LSQM1TGS24QSFD0
1 Card identifier
The card identifier LSQM1TGS24QSFD0 is in the upper right corner of the front panel.
2 Specifications
|
|
IMPORTANT: After you change 40-GE interfaces to 100-GE interfaces, only port 25 is available. |
Table 1 Card specifications
|
Item |
Specification |
|
Card size (H × W × D) |
40 × 399 × 355 mm (1.57 × 15.71 × 13.98 in) |
|
SDRAM (DDR3) |
2GB |
|
Power consumption |
60W to 107W |
|
Ports |
· 24 x 10GBASE-R-SFP+ fiber port · 2 × 40GGBASE-R-QSFP+ fiber port or 1 × 100GBASE-R-QSFP28 fiber port |
|
Connector type |
MPO/LC |
|
Port speed |
· 10GBASE-R-SFP+ fiber port :1 Gbps/10 Gbps · 40GGBASE-R-QSFP+ fiber port: 40 Gbps · 100GBASE-R-QSFP28 fiber port: 100 Gbps |
|
Transmission medium and max transmission distance |
· 10GBASE-R-SFP+ fiber port:see Table 2, Table 3 and Table 4 · 40GBASE-R-QSFP+ fiber port: see Table 5,Table 6, Table 7 and Table 8 · 100GBASE-R-QSFP28 fiber port: see Table 9 |
|
Applicable hardware platforms |
· All S7500E models · All S7500X models |
|
Applicable host software versions |
Version R7556 and later |
Table 2 describes the SFP transceiver modules available for the SFP+ ports on the card.
Table 2 SFP transceiver module specifications
|
Module |
Central wavelength |
Connector type |
Cable specifications |
Maximum transmission distance |
|
SFP-GE-T |
N/A |
RJ-45 |
Category-5 twisted pair cable |
100 m (0.06 miles) |
|
SFP-GE-T-D |
N/A |
RJ-45 |
Category-5 twisted pair cable |
100 m (0.06 miles) |
|
SFP-GE-SX-MM850-A |
850 nm |
LC |
50/125 μm multi-mode optical fiber |
550 m (0.34 miles) |
|
850 nm |
LC |
62.5/125 μm multi-mode optical fiber |
275 m (0.17 miles) |
|
|
SFP-GE-SX-MM850-D |
850 nm |
LC |
50/125 μm multi-mode optical fiber |
550 m (0.34 miles) |
|
850 nm |
LC |
62.5/125 μm multi-mode optical fiber |
275 m (0.17 miles) |
|
|
SFP-GE-LX-SM1310-A |
1310 nm |
LC |
9/125 μm single-mode optical fiber |
10 km (6.21 miles) |
|
1310 nm |
LC |
50/125 μm multi-mode optical fiber |
550 m (1804.46 ft) |
|
|
1310 nm |
LC |
62.5/125 μm multi-mode optical fiber |
550 m (1804.46 ft) |
|
|
SFP-GE-LX-SM1310-D |
1310 nm |
LC |
9/125 μm single-mode optical fiber |
10 km (6.21 miles) |
|
1310 nm |
LC |
50/125 μm multi-mode optical fiber |
550 m (1804.46 ft) |
|
|
1310 nm |
LC |
62.5/125 μm multi-mode optical fiber |
550 m (1804.46 ft) |
|
|
SFP-GE-LH40-SM1310 |
1310 nm |
LC |
9/125 μm single-mode optical fiber |
40 km (24.86 miles) |
|
SFP-GE-LH40-SM1310-D |
1310nm |
LC |
9/125 μm single-mode optical fiber |
40 km (24.86 miles) |
|
SFP-GE-LH40-SM1550 |
1550 nm |
LC |
9/125 μm single-mode optical fiber |
40 km (24.86 miles) |
|
SFP-GE-LH70-SM1550 |
1550 nm |
LC |
9/125 μm single-mode optical fiber |
80 km (49.71 miles) |
|
SFP-GE-LH70-SM1550-D |
1550nm |
LC |
9/125 μm single-mode optical fiber |
80 km (49.71 miles) |
|
SFP-GE-LH100-SM1550 |
1550 nm |
LC |
9/125 μm single-mode optical fiber |
100 km (62.14 miles) |
|
SFP-GE-LX-SM1310-BIDI |
RX: 1490 nm TX: 1310 nm |
LC |
9/125 μm single-mode optical fiber |
10 km (6.21 miles) |
|
SFP-GE-LX-SM1490-BIDI |
RX: 1310 nm TX: 1490 nm |
LC |
9/125 μm single-mode optical fiber |
10 km (6.21 miles) |
|
|
NOTE: · BIDI modules use different central wavelengths in transmit and receive directions, in order to implement bidirectional transmission of optical signals over the same fiber. · BIDI modules must be used in pairs. For example, if an SFP-GE-LX-SM1310-BIDI is used at one end, an SFP-GE-LX-SM1490-BIDI must be used at the other end. |
Table 3 describes the SFP+ transceiver modules available for the SFP+ ports on the card.
Table 3 SFP+ transceiver module specifications
|
Module |
Central wavelength |
Connector type |
Cable specifications |
Maximum transmission distance |
|
SFP-XG-SX-MM850-A |
850 nm |
LC |
50/125 μm multi-mode optical fiber |
300 m (984.25 ft) |
|
850 nm |
LC |
62.5/125 μm multi-mode optical fiber |
33 m (108.27 ft) |
|
|
SFP-XG-SX-MM850-D |
850 nm |
LC |
50/125 μm multi-mode optical fiber |
300 m (984.25 ft) |
|
850 nm |
LC |
62.5/125 μm multi-mode optical fiber |
33 m (108.27 ft) |
|
|
SFP-XG-SX-MM850-E |
850 nm |
LC |
50/125 μm multi-mode optical fiber |
300 m (984.25 ft) |
|
850 nm |
LC |
62.5/125 μm multi-mode optical fiber |
33 m (108.27 ft) |
|
|
SFP-XG-SX-MM850-F1 |
850 nm |
LC |
50/125 μm multi-mode optical fiber |
300 m (984.25 ft) |
|
850 nm |
LC |
62.5/125 μm multi-mode optical fiber |
33 m (108.27 ft) |
|
|
SFP-XG-LX-SM1310 |
1310 nm |
LC |
9/125 μm single-mode optical fiber |
10 km (6.21 miles) |
|
SFP-XG-LX-SM1310-D |
1310 nm |
LC |
9/125 μm single-mode optical fiber |
10 km (6.21 miles) |
|
SFP-XG-LX-SM1310-E |
1310 nm |
LC |
9/125 μm single-mode optical fiber |
10 km (6.21 miles) |
|
SFP-XG-LH40-SM1550 |
1550nm |
LC |
9/125 μm single-mode optical fiber |
40 km (24.86 miles) |
|
SFP-XG-LH40-SM1550-D |
1550nm |
LC |
9/125 μm single-mode optical fiber |
40 km (24.86 miles) |
|
SFP-XG-LH80-SM1550 |
1550nm |
LC |
9/125 μm single-mode optical fiber |
80 km (49.71 miles) |
|
SFP-XG-LH80-SM1550-D |
1550nm |
LC |
9/125 μm single-mode optical fiber |
80 km (49.71 miles) |
Table 4 describes the SFP+ DAC cables available for the SFP+ ports on the card.
Table 4 SFP+ DAC cable specifications
|
SFP+ DAC cable |
Cable length |
Data rate |
Cable type |
Remark |
|
LSWM1STK |
0.65 m (2.13 ft) |
10 Gbps |
SFP+ cable |
Use for connecting SFP+ ports |
|
LSWM2STK |
1.2 m (3.94 ft) |
|||
|
LSWM3STK |
3 m (9.84 ft) |
|||
|
LSTM1STK |
5 m (16.40 ft) |
|||
|
LSTM2STK |
7 m (22.97 ft) |
Table 5 shows the supported QSFP+ modules.
Table 5 QSFP+ module specifications
|
Module |
Central wavelength |
Connector type |
Cable specifications |
Maximum transmission distance |
|
QSFP-40G-BIDI-SR-MM850 |
850 nm |
LC |
50/125μm MMF |
100m |
|
QSFP-40G-CSR4-MM850 |
850 nm |
MPO |
50/125μm MMF |
400m |
|
QSFP-40G-CSR4-MM850-NDDM |
850 nm |
MPO |
50/125μm MMF |
400m |
|
QSFP-40G-SR4-MM850 |
850 nm |
MPO |
50/125 μm MMF |
150 m (492.13 ft.) |
|
QSFP-40G-SR4-MM850-NDDM |
850 nm |
MPO |
50/125 μm MMF |
150 m (492.13 ft.) |
|
QSFP-40G-LR4-WDM1300 |
1271 nm 1291 nm 1311 nm 1331 nm |
LC |
9/125 μm single-mode optical fiber |
10 km (6.21 miles) |
|
QSFP-40G-LR4L-WDM1300 |
1271 nm 1291 nm 1311 nm 1331 nm |
LC |
9/125 μm single-mode optical fiber |
2 km (1.24 miles) |
Table 6 describes the specifications of the QSFP+ DAC cables that used for connecting 40G QSFP+ ports.
Table 6 QSFP+ DAC cable specifications
|
QSFP+ DAC cable |
Cable length |
Data rate |
Cable type |
|
LSWM1QSTK0 |
1 m (3.28 ft) |
40 Gbps |
QSFP+ DAC cables |
|
LSWM1QSTK1 |
3 m (9.84 ft) |
||
|
LSWM1QSTK2 |
5 m (16.40 ft) |
Table 7 describes the specifications of the QSFP+ to SFP+ cables that used for connecting 40G QSFP+ ports to 10G SFP+ ports.
Table 7 QSFP+ to SFP+ cable specifications
|
QSFP+ to SFP+ cable |
Cable length |
Data rate |
Cable type |
|
LSWM1QSTK3 |
1 m (3.28 ft) |
40 Gbps |
40G QSFP+ to 4 × 10G SFP+ cables |
|
LSWM1QSTK4 |
3 m (9.84 ft) |
||
|
LSWM1QSTK5 |
5 m (16.40 ft.) |
Table 8 describes the specifications of the QSFP+ fiber cables that used for connecting 40G QSFP+ ports.
Table 8 QSFP+ fiber cables available for the QSFP+ ports
|
QSFP+ fiber cable |
Cable length |
Data rate |
Remarks |
|
QSFP-40G-D-AOC-7M |
7 m (22.97 ft) |
40 Gbps |
For connecting 40G QSFP+ ports |
|
QSFP-40G-D-AOC-10M |
10 m (32.81 ft) |
||
|
QSFP-40G-D-AOC-20M |
20 m (65.62 ft) |
Table 9shows the supported QSFP28 modules.
Table 9 QSFP28 module specifications
|
Transceiver module |
Central wavelength |
Connector |
Cable specifications |
Maximum transmission distance |
|
QSFP-100G-SR4-MM850 |
850 nm |
MPO (PC polished, 12-fiber) |
50/125 μm multimode optical fiber |
100 m (328.08 ft) |
3 Related documentation
For information about card installation, see H3C S7500E Switch Series Installation Guide and H3C S7500X Switch Series Installation Guide.
For software upgrade, see the release notes for the device.
Copyright © 2017-2018 New H3C Technologies Co., Ltd.
The information in this document is subject to change without notice.
