LSQM1CQGS12SG0 Card Manual-6PW107

HomeSupportResource CenterSwitchesH3C S7500E Switch SeriesH3C S7500E Switch SeriesTechnical DocumentsInstallCard Module ManualsLSQM1CQGS12SG0 Card Manual-6PW107
Download Book
Title Size Downloads
LSQM1CQGS12SG0 Card Manual-6PW107-book.pdf 76.39 KB
Table of Contents
Related Documents

LSQM1CQGS12SG0 12-port 40GBASE-R-QSFP+/4-port 100GBASE-R-QSFP28 optical Ethernet interface card

1  Card identifier

The module identifier LSQM1CQGS12SG0 is in the upper right corner of the front panel.

2  Specifications

 

CAUTION

CAUTION:

To avoid card damage, do not install this card in slot 10 on an S7510E switch.

 

IMPORTANT

IMPORTANT:

After you change 40-GE interfaces to 100-GE interfaces, only ports 1, 4, 7, and 10 are available.

 

Table 1 Card specifications

Item

Specification

Dimensions (H × W × D)

40 × 399 × 355 mm (1.57 × 15.71 × 13.98 in)

SDRAM (DDR3)

2 GB

Power consumption

55 W to 147 W

Interfaces

12 × 40GBASE-R-QSFP+ fiber port or 4 × 100GBASE-R-QSFP28 fiber port

Transmission rate

40GBASE-R-QSFP+ fiber port: 40 Gbps

100GBASE-R-QSFP28 fiber port: 100 Gbps

 

 

NOTE:

·      To verify the compatibility of the card with the software release you are using, see the release notes.

·      For information about transceiver modules and cables available for the card, see the cards and transceiver modules compatibility matrixes for the device.

 

3  Related documentation

For module installation, see the installation guide for the device.

For software upgrade, see the release notes for the device.

 

 

Copyright © 2016-2020 New H3C Technologies Co., Ltd.

The information in this document is subject to change without notice.