Fundamentals Configuration Guide

Covers information about using the command line interface, logging in to the device, and automatic management features.

This guide includes:

·     CLI (command line interface overview and how to use the CLI).

·     RBAC.

·     Logging in to the device.

·     FTP and TFTP.

·     File system management.

·     Configuration file management.

·     Software upgrade.

·     Automatic configuration.

·     Target configuration management.

System Management Configuration Guide

Covers the configuration of device system management & monitoring and information center features.

This guide includes:

·     Basic device management.

·     Device hardening.

·     Hardware resource management.

·     EAA.

·     Process monitoring and maintenance

·     Information center.

Interface Configuration Guide

Covers the configuration of various interfaces.

This guide includes:

·     Bulk interface configuration.

·     Ethernet interface.

·     Loopback, null, and inloopback interfaces.

Layer 2—LAN Switching Configuration Guide

Covers Layer 2 technologies and features used on a LAN switched network. You can use these features to implement traffic control and load balancing, remove Layer 2 loops, isolate users within a VLAN, or re-mark VLAN tags.

This guide includes:

·     Tunnel interface.

·     MAC address table.

·     Ethernet link aggregation.

·     Port isolation.

·     VLAN.

·     Loopback detection.

·     Spanning tree.

·     LLDP.

·     PFC.

·     Service loopback group.

·     M-LAG.

·     QinQ.

·     VLAN mapping.

Layer 3—IP Services Configuration Guide

Covers IP addressing, network performance optimization, ARP, and interoperation between IPv4 and IPv6.

This guide includes:

·     ARP.

·     IP addressing.

·     DHCP.

·     DNS.

·     IP forwarding basics.

·     Fast forwarding.

·     Adjacency table.

·     IRDP.

·     IP performance optimization.

·     UDP helper.

·     IPv6 basics.

·     IPv6 neighbor discovery.

·     DHCPv6.

·     IPv6 fast forwarding.

·     IPv6 transition technologies.

Layer 3—IP Routing Configuration Guide

Covers the routing technologies for IPv4 and IPv6 networks of different sizes, route filtering, route control, and policy based routing.

This guide includes:

·     Basic IP routing.

·     Static routing.

·     RIP.

·     OSPF.

·     IS-IS.

·     Basic BGP.

·     Advanced BGP.

·     Policy-based routing.

·     IPv6 static routing.

·     RIPng.

·     OSPFv3.

·     IPv6 policy-based routing.

·     Routing policy.

MCE Configuration Guide

Covers MCE features.

This guide includes:

·     MCE.

ACL and QoS Configuration Guide

Covers information about classifying traffic with ACLs, and allocating network resources and managing congestions with QoS technologies to improve network performance and network use efficiency.

This guide includes:

·     ACL.

·     QoS.

·     Time range.

IP Tunneling Configuration Guide

Covers IP tunneling fundamentals and configuration.

This guide includes:

·     IPv4 over IPv4 tunneling.

·     IPv6 over IPv6 tunneling.

·     GRE.

·     IPsec.

·     IKE.

·     IKEv2.

User Access and Authentication Configuration Guide

Covers fundamentals and configuration of user access and authentication configuration features.

This guide includes:

·     AAA.

Security Configuration Guide

Covers security features. The major security features available on the device include: data security (public key management and SSH), and attack protection (ARP attack protection, uRPF, attack detection and prevention).

This guide includes:

·     Password control.

·     Keychain.

·     Public key configuration.

·     PKI.

·     IPsec (IPsec, IKE, and IKEv2).

·     SSH.

·     SSL.

·     Attack detection and defense.

·     IP source guard.

·     ARP attack protection.

·     ND attack defense.

·     uRPF.

·     Crypto engine.

High Availability Configuration Guide

Covers high availability technologies and features available on the device for failure detection and failover. Failure detection technologies focus on fault detection and isolation. Failover technologies focus on network recovery.

This guide includes:

·     Monitor Link.

·     Error code detection.

·     VRRP.

·     BFD.

·     Track.

·     DLDP.

·     ERPS.

·     RRPP.

·     Smart Link.

Network Management and Monitoring Configuration Guide

Covers features that help you manage and monitor your network, for example, manage system events, collect traffic statistics, sample packets, assess network performance, and test network connectivity. This guide includes:

·     Ping and tracert.

·     System debugging.

·     NQA.

·     NTP.

·     PTP.

·     SNMP.

·     Event MIB.

·     Mirroring.

·     sFlow.

·     RMON.

Telemetry Configuration Guide

Covers fundamentals and configuration for telemetry related features.

This guide includes:

·     gRPC.

Network Programmability Configuration Guide

Covers features for network programmability.

This guide includes:

·     NETCONF.

·     Tcl.

·     Python.

Acronyms

Lists the significant acronyms in the configuration guides.