00-About the S6300 Command References

HomeSupportResource CenterSwitchesH3C S6300 Switch SeriesH3C S6300 Switch SeriesTechnical DocumentsCommandCommand ReferencesH3C S6300 Switch Series Command References-Release 243x-6W10000-About the S6300 Command References
Download Book
Title Size Downloads
00-About the S6300 Command References.rar 4.43 MB
Table of Contents
Related Documents

About the H3C S6300 command references

The H3C S6300 command references describe the commands and command syntax options available for the H3C S6300 Switch Series.


Command reference


Fundamentals Command Reference

Covers the commands for logging in to and setting up an S6300 switch. This command reference includes:

·     CLI (command privilege settings and CLI management commands).

·     Logging in to the device.

·     RBAC.

·     FTP and TFTP.

·     File system management.

·     Configuration file management.

·     Software upgrade.

·     ISSU.

·     Emergency shell.

·     Device management.

·     Tcl.

·     Python.

·     License management.

·     Preprovisioning.

IRF Command Reference

Covers the commands for configuring the Intelligent Resilient Framework (IRF) technology features, including IRF commands and IRF 3 commands. IRF commands cover planning the switch roles in the IRF fabric, connecting the IRF links, and detecting and maintaining the IRF fabric. IRF 3 commands cover configuring the switch as a PEX or independent device.

Layer 2—LAN Switching Command Reference

Covers the commands for configuring Layer 2 technologies and features in a LAN switched network.

This command reference includes:

·     Ethernet interface.

·     Loopback, null, and inloopback interfaces.

·     Bulk interface configuration.

·     MAC address table and MAC Information.

·     Ethernet link aggregation.

·     Port isolation.

·     Spanning tree.

·     Loop detection.

·     VLAN (including VLAN, voice VLAN, and private VLAN).

·     MVRP.

·     QinQ.

·     VLAN mapping.

·     LLDP.

·     Cut-through forwarding.

Layer 3—IP Services Command Reference

Covers the commands for configuring and managing IP addressing (including static and dynamic IPv4 and IPv6 address assignment), network performance optimization, and ARP.

This command reference includes:

·     ARP (including ARP, gratuitous ARP, proxy ARP, ARP snooping, and ARP fast reply).

·     IP addressing.

·     DHCP.

·     DNS and DDNS.

·     Basic IP forwarding and load sharing.

·     Fast forwarding.

·     IRDP.

·     IP performance optimization.

·     UDP helper.

·     IPv6 basics.

·     DHCPv6.

·     IPv6 fast forwarding.

Layer 3—IP Routing Command Reference

Covers the commands for configuring routes for IPv4 and IPv6 networks of different sizes.

This command reference includes:

·     Basic IP routing.

·     Static routing.

·     RIP.

·     OSPF.

·     IS-IS.

·     BGP.

·     IPv6 static routing.

·     RIPng.

·     OSPFv3.

·     IPv6 IS-IS.

IP Multicast Command Reference

Covers the commands for Layer 2 IPv4 multicast protocols (including IGMP snooping, PIM snooping, and multicast VLAN), Layer 3 IPv4 multicast protocols (including IGMP, PIM, and MSDP), Layer 2 IPv6 multicast protocols (including MLD snooping, IPv6 PIM snooping, and IPv6 multicast VLAN), and Layer 3 IPv6 multicast protocols (including MLD and IPv6 PIM).

This command reference includes:

·     IGMP snooping.

·     PIM snooping.

·     Multicast VLAN.

·     Multicast routing and forwarding.

·     IGMP.

·     PIM.

·     MSDP.

·     MLD snooping.

·     IPv6 PIM snooping.

·     IPv6 multicast VLAN.

·     IPv6 multicast routing and forwarding.

·     MLD.

·     IPv6 PIM.

MCE Command Reference

Covers the commands for configuring MCE.

ACL and QoS Command Reference

Covers the commands for classifying traffic with ACLs, and allocating network resources and managing congestions with QoS technologies to improve network performance and network use efficiency.

This command reference includes:

·     ACL.

·     QoS (including QoS policy, priority mapping, GTS and rate limit, congestion management, congestion avoidance, and aggregate CAR).

·     Time range.

·     Data buffer.

·     QCN.

Security Command Reference

Covers security feature commands. Available security features include identity authentication, secure management, and attack protection.

This command reference includes:

·     AAA.

·     802.1X.

·     MAC authentication.

·     Portal.

·     Port security.

·     Password control.

·     Public key management.

·     PKI.

·     IPsec, IKE, and IKEv2.

·     SSH.

·     SSL.

·     IP source guard.

·     ARP attack protection.

·     MFF.

·     Crypto engine.

·     FIPS.

·     User profile.

·     Attack detection and prevention.

·     ND attack defense.

·     Keychain.

High Availability Command Reference

Covers high availability commands for managing failure detection and failover. Failure detection technologies focus on fault detection and isolation. Failover technologies focus on network recovery.

This command reference includes:

·     Ethernet OAM.

·     CFD.

·     DLDP.

·     RRPP.

·     Smart Link.

·     Monitor Link.

·     VRRP.

·     BFD.

·     Track.

·     Process placement.

Network Management and Monitoring Command Reference

Covers the commands that help you manage and monitor your network, for example, manage system events, collect traffic statistics, sample packets, assess network performance, and test network connectivity.

This command reference includes:

·     System maintenance and debugging (ping, tracert, and system debugging).

·     NTP and SNTP.

·     PTP.

·     Information center.

·     SNMP.

·     RMON.

·     NQA.

·     Mirroring (including port mirroring and traffic mirroring).

·     sFlow.

·     Process monitoring and maintenance.

·     EAA.

·     CWMP.

·     NETCONF.

·     Packet capture.

FCoE Command Reference

Covers the commands for configuring FCoE.

TRILL Command Reference

Covers the commands for configuring TRILL.

EVB Command Reference

Covers the commands for configuring EVB.

OpenFlow Command Reference

Covers the commands for configuring OpenFlow.