00-About the Command References

HomeSupportResource CenterSwitchesS5570S SeriesS5570S-EI SeriesTechnical DocumentsReference GuidesCommand ReferencesH3C S5570S-EI & S5500V3-SI Command References-R11xx-6W10100-About the Command References
Table of Contents
Related Documents

About the H3C S5570S-EI&S5500V3-SI Switch Series command references (R11xx)

The H3C S5570S-EI&S5500V3-SI Switch Series command references (R11xx) describe the commands and command syntax options available for the H3C S5570S-EI&S5500V3-SI switch series in Release 1111, Release 1112, Release 1115 and later.

 

Command reference

Content

Fundamentals Command Reference

Covers the commands for logging in to and setting up the switch. This command reference includes:

·     Basic CLI.

·     RBAC.

·     Login management.

·     FTP and TFTP.

·     File system management.

·     Configuration file management.

·     Software upgrade.

·     Device management.

·     Tcl.

·     Python.

Virtual Technologies Command Reference

Covers the commands for configuring the Intelligent Resilient Framework (IRF) technology features.

Layer 2—LAN Switching Command Reference

Covers the commands for configuring Layer 2 technologies and features in a LAN switched network. This command reference includes:

·     MAC address table and MAC Information.

·     PPPoE relay.

·     Bulk interface configuration.

·     Ethernet interface.

·     Ethernet link aggregation.

·     Port isolation.

·     VLAN.

·     MVRP.

·     Loopback, null, and inloopback interfaces.

·     QinQ.

·     VLAN mapping.

·     Loop detection.

·     Spanning tree.

·     LLDP.

·     L2PT.

Layer 3—IP Services Command Reference

Covers the commands for configuring IP addressing, IP performance optimization, ARP, IP forwarding basic, DHCP, DNS, UDP helper, IPv6 basics, and DHCPv6 server. This command reference includes:

·     ARP (including gratuitous ARP, proxy ARP, ARP snooping, and ARP direct route advertisement).

·     IP addressing.

·     DHCP.

·     DNS.

·     IP forwarding basics.

·     Fast forwarding.

·     Adjacency table.

·     IRDP.

·     IP performance optimization.

·     UDP helper.

·     IPv6 basics.

·     DHCPv6.

·     IPv6 fast forwarding.

·     Tunneling.

·     HTTP redirect.

Layer 3—IP Routing Command Reference

Covers the commands for configuring routes for IPv4 and IPv6 networks of different sizes. This command reference includes:

·     Basic IP routing.

·     Static routing.

·     RIP.

·     OSPF.

·     IS-IS.

·     BGP.

·     Policy-based routing.

·     IPv6 static routing.

·     RIPng.

·     OSPFv3.

·     IPv6 policy-based routing.

·     Routing policy.

IP Multicast Command Reference

Covers the commands for Layer 2 and Layer 3 multicast protocols.

This command reference includes:

·     IGMP snooping.

·     PIM snooping.

·     Multicast VLAN.

·     Multicast routing and forwarding.

·     IGMP.

·     PIM.

·     MSDP.

·     MLD snooping.

·     IPv6 PIM snooping.

·     IPv6 multicast VLAN.

·     IPv6 multicast routing and forwarding.

·     MLD.

·     IPv6 PIM.

MCE Command Reference

Covers the commands for configuring MCE.

ACL and QoS Command Reference

Covers the commands for classifying traffic with ACLs, and allocating network resources and managing congestions with QoS technologies to improve network performance and network use efficiency. This command reference includes:

·     ACL.

·     QoS.

·     Data buffer.

·     Time range.

Security Command Reference

Covers security feature commands. Available security features include identity authentication, secure management, and attack protection. This command reference includes:

·     AAA.

·     802.1X.

·     MAC authentication.

·     Portal.

·     Web authentication.

·     Port security.

·     User profile.

·     Password control.

·     Keychain.

·     Public key management.

·     PKI.

·     IPsec.

·     SSH.

·     SSL.

·     TCP attack prevention.

·     IP source guard.

·     ARP attack protection.

·     ND attack defense.

·     uRPF.

·     SAVI.

·     MFF.

·     Crypto engine.

·     FIPS.

·     802.1X client.

·     Attack detection and prevention.

High Availability Command Reference

Covers high availability commands for managing failure detection and failover. Failure detection technologies focus on fault detection and isolation. Failover technologies focus on network recovery. This command reference includes:

·     Ethernet OAM.

·     CFD.

·     DLDP.

·     RRPP.

·     ERPS

·     Smart Link.

·     Monitor Link.

·     VRRP.

·     BFD.

·     Track.

·     Process placement.

·     VSRP

Network Management and Monitoring Command Reference

Covers the commands that help you manage and monitor your network, for example, manage system events, and test network connectivity. This command reference includes:

·     System maintenance and debugging (ping, tracert, and system debugging).

·     NQA.

·     NTP (including SNTP).

·     PoE.

·     SNMP.

·     RMON.

·     Event MIB.

·     NETCONF.

·     SmartMC.

·     CWMP.

·     EAA.

·     Process monitoring and maintenance.

·     Mirroring.

·     sFlow.

·     Information center.

·     Cloud connection.

·     EPA.

·     VCF fabric.

Telemetry Command Reference

Covers the commands for configuring gRPC.

 

 

  • Cloud & AI
  • InterConnect
  • Intelligent Computing
  • Security
  • SMB Products
  • Intelligent Terminal Products
  • Product Support Services
  • Technical Service Solutions
All Services
  • Resource Center
  • Policy
  • Online Help
All Support
  • Become a Partner
  • Partner Resources
  • Partner Business Management
All Partners
  • Profile
  • News & Events
  • Online Exhibition Center
  • Contact Us
All About Us
新华三官网