00-About the Command References

HomeSupportResource CenterSwitchesH3C S5560X Switch SeriesH3C S5560X-EI Switch SeriesTechnical DocumentsCommandCommand ReferencesH3C S5560X-EI & S5500V2-EI & MS4520V2 Switch Series Command References-R65xx-6W10000-About the Command References
Download Book
Title Size Downloads
00-About the Command References-book.rar 8.10 MB
Table of Contents
Related Documents

About the H3C S5560X-EI & S5500V2-EI & MS4520V2 command references

The command references are applicable to the following switches and software versions:

 

Hardware

Software versions

H3C S5560X-EI switch series

Release 6510 and later

H3C S5500V2-EI switch series

Release 6510 and later

H3C MS4520V2 switch series

Release 6510P01 and later

 

The command references describe the commands and command syntax options available for the switch.

 

Command reference

Content

Fundamentals Command Reference

Covers the commands for logging in to and setting up the switch. This command reference includes:

·     Basic CLI

·     RBAC

·     Login management

·     FTP and TFTP

·     File system management

·     Configuration file management

·     Software upgrade

·     ISSU

·     Device management

·     Tcl

·     Python

·     License management

·     Automatic configuration

Virtual Technologies Command Reference

Covers the commands for configuring the Intelligent Resilient Framework (IRF) technology features and the IRF 3.1 technology features.

Layer 2—LAN Switching Command Reference

Covers the commands for configuring Layer 2 technologies and features in a LAN switched network. This command reference includes:

·     Ethernet interface

·     Loopback, null, and inloopback interfaces

·     Bulk interface configuration

·     MAC address table and MAC Information

·     Ethernet link aggregation

·     DRNI

·     Port isolation

·     Spanning tree

·     Loop detection

·     VLAN (including VLAN, private VLAN, super VLAN, and voice VLAN)

·     MVRP

·     QinQ

·     VLAN mapping

·     LLDP

·     L2PT

·     PPPoE relay

Layer 3—IP Services Command Reference

Covers the commands for configuring IP addressing, IP performance optimization, ARP, IP forwarding basic, DHCP, DNS, UDP helper, IPv6 basics, and DHCPv6 server. This command reference includes:

·     ARP (including gratuitous ARP, proxy ARP, ARP snooping, and ARP direct route advertisement)

·     IP addressing

·     DHCP

·     DNS (including DDNS)

·     mDNS relay

·     IP forwarding basics (including basic IP forwarding and load sharing)

·     Fast forwarding

·     IRDP

·     IP performance optimization

·     UDP helper

·     IPv6 basics

·     DHCPv6

·     IPv6 fast forwarding

·     Adjacency table

·     GRE

·     HTTP redirect

·     Tunneling

Layer 3—IP Routing Command Reference

Covers the commands for configuring routes for IPv4 and IPv6 networks of different sizes. This command reference includes:

·     Basic IP routing

·     Static routing

·     RIP

·     OSPF

·     IS-IS

·     BGP

·     Policy-based routing

·     IPv6 static routing

·     RIPng

·     OSPFv3

·     IPv6 policy-based routing

·     Routing policy

IP Multicast Command Reference

Covers the commands for Layer 2 IPv4 multicast protocols (including IGMP snooping and multicast VLAN), Layer 3 IPv4 multicast protocols (including IGMP and PIM), Layer 2 IPv6 multicast protocols (including MLD snooping), and Layer 3 IPv6 multicast protocols (including MSDP). This command reference includes:

·     IGMP snooping

·     PIM snooping

·     Multicast VLAN

·     Multicast routing and forwarding

·     IGMP

·     PIM

·     MSDP

·     MLD snooping

·     IPv6 PIM snooping

·     IPv6 multicast VLAN

·     IPv6 multicast routing and forwarding

·     MLD

·     IPv6 PIM

MPLS Command Reference

Covers the commands for configuring basic and extended MPLS features. This command reference includes:

·     Basic MPLS

·     Static LSP

·     LDP

·     MPLS L3VPN

·     MPLS L2VPN

·     VPLS

·     MPLS OAM

·     MCE and IPv6 MCE

·     MPLS SR

ACL and QoS Command Reference

Covers the commands for classifying traffic with ACLs, and allocating network resources and managing congestions with QoS technologies to improve network performance and network use efficiency. This command reference includes:

·     ACL

·     QoS (including QoS policy, priority mapping, traffic policing, GTS, and rate limit,  congestion management, congestion avoidance, aggregate CAR, and queue-based accounting)

·     Data buffer

·     Time range

Security Command Reference

Covers security feature commands. Available security features include identity authentication, secure management, and attack protection. This command reference includes:

·     AAA

·     802.1X

·     MAC authentication

·     Portal

·     Web authentication

·     Port security

·     User profile

·     Password control

·     Keychain

·     Public key management

·     PKI

·     IPsec, IKE, and IKEv2

·     SSH

·     SSL

·     Attack detection and prevention

·     TCP attack prevention

·     IP source guard

·     ARP attack protection

·     ND attack defense

·     uRPF

·     SAVI

·     MFF

·     Crypto engine

·     FIPS

·     MACsec

·     802.1X client

High Availability Command Reference

Covers high availability commands for managing failure detection and failover. Failure detection technologies focus on fault detection and isolation. Failover technologies focus on network recovery. This command reference includes:

·     Ethernet OAM

·     CFD

·     DLDP

·     RRPP

·     ERPS

·     Smart Link

·     Monitor Link

·     VRRP

·     BFD

·     Track

·     Process placement

Network Management and Monitoring Command Reference

Covers the commands that help you manage and monitor your network, for example, manage system events, and test network connectivity. This command reference includes:

·     System maintenance and debugging (ping, tracert, and system debugging)

·     NQA

·     iNQA

·     NTP (including SNTP)

·     PoE

·     SNMP

·     RMON

·     Event MIB

·     NETCONF

·     SmartMC

·     EPA

·     CWMP

·     EAA

·     Process monitoring and maintenance

·     Mirroring (including both port and flow mirroring)

·     sFlow

·     Information center

·     Packet capture

·     VCF fabric

·     Cloud connection

·     EPS agent

·     eMDI

·     Service quality analysis (SQA)

Telemetry Command Reference

Covers the commands for configuring gRPC.

OpenFlow Command Reference

Covers the commands for configuring OpenFlow.

VXLAN Command Reference

Covers the commands for configuring VXLAN.

EVPN Command Reference

Covers the commands for configuring EVPN.