H3C S12500X-AF LSXM1TGS48C2HB1 Card Manual-6PW104

HomeSupportResource CenterSwitchesH3C S12500X-AF Switch SeriesH3C S12500X-AF Switch SeriesTechnical DocumentsInstallCard Module ManualsH3C S12500X-AF LSXM1TGS48C2HB1 Card Manual-6PW104
Download Book
Table of Contents
Related Documents

LSXM1TGS48C2HB1 48-port 10G SFP+ + 2-port 100G QSFP28 fiber interface card

1  Identifier

The card identifier LSXM1TGS48C2HB1 is at the upper right corner of the front panel.

2  Specifications

Figure 1 Interface types and numbers

(1) QSFP28 ports

(2) QSFP+ ports

 

Table 1 Card specifications

Item

Specification

Processor

MIPS64 (Dual Core) @ 1.2 GHz

SDRAM

8 GB DDR3 SDRAM

Power consumption

163 W to 275 W

Interfaces

·          48 × 10G SFP+ port

·          2 × 100G QSFP28 port

Transmission rate

·          SFP+ port: 10 Gbps

·          QSFP28 port: 100/40 Gbps

Compatible device models

S12500X-AF Switch Series

Compatible switching fabric modules

Type H switching fabric modules

 

CAUTION

CAUTION:

This card can be used only with Type H switching fabric modules, which have a character string of SFH in their card identifiers (for example, LSXM1SFH16C1). Card damage will occur if this card is used with a switching fabric module that is not Type H.

 

 

NOTE:

Switching fabric module slots are covered by fan trays. To verify the card identifiers of the switching fabric modules while the switch is operating, use the display device command.

 

IMPORTANT

IMPORTANT:

·       To verify compatibility of the card with the software release you are using, see the release notes.

·       For the card to start up correctly, make sure the three switching fabric module slots with the greatest slot IDs take precedence over other slots for module installation.

·       For information about transceiver modules and cables available for the card, see H3C S12500X-AF Switch Series Cards and Transceiver Modules Compatibility Matrixes.

·       If high-performance DDR memory is installed on the module (labelled with this installation information), see the release notes to verify the device software compatibility with the memory.

 

3  Related documentation

For card installation, see H3C S12500X-AF Switch Series Installation Guide.

For software upgrade, see the release notes for the device.

 

 

Copyright © 2020 New H3C Technologies Co., Ltd.

The information in this document is subject to change without notice.