H3C S12500R Switch Router Series Port Splitting and Compatibility With Transceivers and Cables-6W100-book.pdf(67.04 KB)
- Released At: 06-11-2022
- Page Views:
- Downloads:
- Table of Contents
- Related Documents
-
|
H3C S12500R Switch Router Series |
Port Splitting and Compatibility with Transceivers |
and Cables |
|
Document version: 6W100-20221009
Copyright © 2022 New H3C Technologies Co., Ltd. All rights reserved.
No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of New H3C Technologies Co., Ltd.
Except for the trademarks of New H3C Technologies Co., Ltd., any trademarks that may be mentioned in this document are the property of their respective owners.
The information in this document is subject to change without notice.
Port splitting and compatibility with transceivers and cables
This document describes port splitting and compatibility with transceiver modules and cables on some interface modules.
Table 1 Port splitting and compatibility with transceiver modules and cables on Type K interface modules
Interface module model |
Splittable ports |
Support for the splitting mode |
Downward compatibility with transceivers and cables |
Restrictions |
LSXM1CGQ48KBR1 |
2, 4, 5, 7, 10, 11, |
· 40G to 4 × 10G splitting: supported · 100G to 4 × 25G splitting: not supported · 1 port to 2 × logical ports splitting: not supported |
Ports 17, 20, 27, and 30 do not support 40G transceivers or cables. The other ports support 40G transceivers or cables. |
Splitting one port will cause another port to be unusable. For the affected ports, see Table 4. |
LSXM1CGQ48KB1 |
2, 4, 5, 7, 10, 11, |
· 40G to 4 × 10G splitting: supported · 100G to 4 × 25G splitting: not supported · 1 port to 2 × logical ports splitting: not supported |
The 100G ports support 40G transceiver modules and cables. |
Splitting one port will cause another port to be unusable. For the affected ports, see Table 5. |
LSXM1CDQ24KBR1 |
2 to 12, 14 to 24 |
· One port to 4 × 100G ports splitting: supported · One port to 2 × 100G ports splitting: supported · One port to 2 × 200G ports splitting: supported |
· The port is compatible with 40G transceivers after being split into two 100G ports. · The 400G port is compatible with 200G/100G transceiver modules and cables after being split |
A DR4 transceiver is required to split one port to four logical ports. |
LSXM1CDQ24KB1 |
2 to 12, 14 to 24 |
· One port to 4 × 100G ports splitting: supported · One port to 2 × 100G ports splitting: supported · One port to 2 × 200G ports splitting: supported |
· The port is compatible with 40G transceivers after being split into two 100G ports. · The 400G port is compatible with 200G/100G transceiver modules and cables after being split |
A DR4 transceiver is required to split one port to four logical ports. |
LSXM1CDQ36KBR1 |
1 to 36 |
· One port to 4 × 100G ports splitting: supported · One port to 2 × 100G ports splitting: supported · One port to 2 × 200G ports splitting: supported |
· The port is compatible with 40G transceivers after being split into two 100G ports. · The 400G port is compatible with 200G/100G transceiver modules and cables after being split. |
A DR4 transceiver is required to split one port to four logical ports. |
LSXM1CCQ48KBR1 |
N/A |
N/A |
The 200G ports are compatible with 100G and 40G transceiver modules and cables. |
N/A |
LSXM1CGMS48KBR1 |
N/A |
N/A |
N/A |
N/A |
LSXM1CGQFX16KBR1 |
N/A |
N/A |
N/A |
N/A |
LSXM1CGQ72KCR1 |
N/A |
N/A |
· The 200G ports are compatible with 100G and 40G transceiver modules and cables. · The 100G ports are compatible with 40G transceiver modules and cables. |
· 36 × 200G ports mode: Ports 1 to 18 and 55 to 72 are used as 200G ports. The other ports are not usable. · 72 × 100G ports mode: All the 72 ports are used as 100G ports. · 18 × 200G ports + 36 x 100G ports mode: Ports 1 to 36 are used as 100G ports, ports 55 to 72 are used as 200G ports, and the other ports are not usable. |
LSXM1CDMS36KCR1 |
1 to 36 |
· One port to 4 × 100G ports splitting: supported · One port to 2 × 100G ports splitting: supported · One port to 2 × 200G ports splitting: supported |
· The port is compatible with 40G transceivers after being split into two 100G ports. · The 400G port is compatible with 200G/100G transceiver modules and cables after being split. |
A DR4 transceiver is required to split one port to four logical ports. |
Table 2 Port splitting and compatibility with transceiver modules and cables
Interface module model |
Splittable ports |
Support for the splitting mode |
Downward compatibility with transceivers and cables |
Restrictions |
LSXM1CGQ18C1 |
N/A |
· 40G to 4 × 10G: supported · 100G to 4 × 25G: not supported |
The 100G ports are compatible with 40G transceivers and cables. |
N/A |
LSXM1CGQ8C1 |
N/A |
· 40G to 4 × 10G: supported · 100G to 4 × 25G: not supported |
The 100G ports are compatible with 40G transceivers and cables. |
N/A |
Table 3 Port splitting and compatibility with transceiver modules and cables on Type H interface modules
Interface module model |
Splittable ports |
Support for the splitting mode |
Downward compatibility with transceivers and cables |
Restrictions |
LSXM1CGQ36HBR1 |
1 to 36 |
· 40G to 4 × 10G splitting: supported · 100G to 4 × 25G splitting: not supported |
The 100G ports are compatible with 40G transceivers and cables. |
N/A |
LSXM1CGQ18QGHBR1 |
1 to 36 |
· 40G to 4 × 10G splitting: supported · 100G to 4 × 25G splitting: not supported |
Ports 7 to 12, 19 to 24, and 31 to 36 are 100G ports and compatible with 40G transceivers and cables. Ports 1 to 6, 13 to 18, and 25 to 30 are 40G ports and support only 40G transceivers and cables. |
You can use some ports as 40G ports and some ports as 100G ports. If ports 7 to 12, 19 to 24, and 31 to 36 use 100G transceiver modules or cables, the interface module cannot reach the wire speed. |
LSXM1CGQ6QGHFR1 |
1 to 12 |
· 40G to 4 × 10G splitting: supported · 100G to 4 × 25G splitting: not supported |
The 100G ports are compatible with 40G transceivers and cables. |
N/A |
LSXM1CGQ18QGHFR1 |
1 to 36 |
· 40G to 4 × 10G splitting: supported · 100G to 4 × 25G splitting: not supported |
The 100G ports are compatible with 40G transceivers and cables. |
N/A |
LSXM1CGQ36HFR1 |
1 to 36 |
· 40G to 4 × 10G splitting: supported · 100G to 4 × 25G splitting: not supported |
The 100G ports are compatible with 40G transceivers and cables. |
N/A |
LSXM2CGQ18QGHB2 |
1 to 36 |
· 40G to 4 × 10G splitting: supported · 100G to 4 × 25G splitting: not supported |
Ports 7 to 12, 19 to 24, and 31 to 36 are 100G ports and compatible with 40G transceivers and cables. Ports 1 to 6, 13 to 18, and 25 to 30 are 40G ports and support only 40G transceivers and cables. |
You can use some ports as 40G ports and some ports as 100G ports. If ports 7 to 12, 19 to 24, and 31 to 36 use 100G transceiver modules or cables, the interface module cannot reach the wire speed. |
Splittable ports and unusable ports after port splitting |
Port number |
||||||||||
Splittable ports |
2 |
4 |
5 |
7 |
10 |
11 |
13 |
16 |
19 |
22 |
24 |
Unusable ports after port splitting |
1 |
3 |
8 |
6 |
9 |
14 |
12 |
15 |
18 |
21 |
23 |
Splittable ports |
26 |
29 |
32 |
33 |
35 |
38 |
39 |
41 |
44 |
46 |
48 |
Unusable ports after port splitting |
25 |
28 |
31 |
36 |
34 |
37 |
42 |
40 |
43 |
45 |
47 |
Splittable ports and unusable ports after port splitting |
Port number |
|||||||||||
Splittable ports |
2 |
4 |
5 |
7 |
10 |
11 |
13 |
16 |
17 |
19 |
22 |
24 |
Unusable ports after port splitting |
1 |
3 |
8 |
6 |
9 |
14 |
12 |
15 |
20 |
18 |
21 |
23 |
Splittable ports |
26 |
27 |
29 |
32 |
33 |
35 |
38 |
39 |
41 |
44 |
46 |
48 |
Unusable ports after port splitting |
25 |
30 |
28 |
31 |
36 |
34 |
37 |
42 |
40 |
43 |
45 |
47 |