- Released At: 01-02-2021
- Page Views:
- Downloads:
- Table of Contents
- Related Documents
-
LSXM1SFK08GR1 fabric module
1 Identifier
The module identifier LSXM1SFK08GR1 is in the upper right corner of the front panel.
2 Specifications
|
CAUTION: This module can be used only with Type K interface modules, which have a character string of K in their module identifiers (LSXM1CGQ48KBR1 for example). Module damage will occur if this module is used with an interface module that is not Type K. |
|
NOTE: When the device is operating, you can verify the module identifiers of interface modules by viewing the front panels or by executing the display device command. |
Table 1 Module specifications
Item |
Specification |
Processor |
Intel processor (Quad-Core) @ 2.2 GHz |
SDRAM |
8 GB DDR4 SDRAM |
Power consumption |
350 W to 450 W |
Compatible device models |
· S12508R switch router · S12508CR switch router |
Compatible interface modules |
Type K interface modules |
|
IMPORTANT: · Before you install the module on a device, see the release notes to verify compatibility of the module with the software release you are using. · Remove the protection box from the module before you install the module. · Fabric modules are installed in the slots behind fan trays. Before installing a fan tray, install fabric modules in the slots behind the fan tray. Before removing a fabric module, remove the fan tray in front of it. · Do not install fabric modules of different models on the same device. |
3 Related documentation
For module installation, see H3C S12500R Switch Router Series Installation Guide or H3C S12500CR Switch Router Series Installation Guide.
For software upgrade, see the release notes for the device.
Copyright © 2020 New H3C Technologies Co., Ltd.
The information in this document is subject to change without notice.