H3C S12500R LSXM1CGQ36HFR1 Card Manual-APW100

HomeSupportResource CenterSwitchesH3C S12500R Switch Router SeriesH3C S12500R Switch Router SeriesTechnical DocumentsInstallCard Module ManualsH3C S12500R LSXM1CGQ36HFR1 Card Manual-APW100
Download Book
Table of Contents
Related Documents

LSXM1CGQ36HFR1 36-port 100GBASE QSFP28 Ethernet optical interface module

1  Identifier

The module identifier LSXM1CGQ36HFR1 is in the upper right corner of the front panel.

2  About the module

CAUTION

CAUTION:

This module can be used only with Type H fabric modules, which have a character string of SFH in their module identifiers (for example, LSXM2SFH16CR1). Module damage will occur if this module is used with a fabric module that is not Type H.

 

 

NOTE:

Fabric module slots are covered by fan trays. To verify the identifiers of the fabric modules while the switch is operating, use the display device command.

 

Table 1 Module specifications

Item

Specification

Processor

MIPS64 (Dual-Core) @ 1.2 GHz

SDRAM

16 GB DDR3 SDRAM

Power consumption

585 W to 1100 W

Ports

36 × QSFP28 ports

Port transmission rate

100/40 Gbps

Compatible device models

H3C S12500R Ethernet switch router series (high-performance fan trays are required.)

Compatible fabric modules

Type H fabric modules

 

IMPORTANT

IMPORTANT:

·     To verify compatibility of the module with the software release you are using, see the release notes.

·     For information about transceiver modules and cables available for the module, see H3C S12500R Ethernet Switch Router Series Cards and Transceiver Modules Compatibility Matrixes.

 

3  Related documentation

For module installation, see H3C S12500R Ethernet Switch Router Series Installation Guide.

For software upgrade, see the release notes for the device.

 

 

Copyright © 2019 New H3C Technologies Co., Ltd.

The information in this document is subject to change without notice.