- Released At: 16-02-2022
- Page Views:
- Downloads:
- Table of Contents
- Related Documents
-
LSXM3SFS16F2 fabric module
1 Identifier
The module identifier LSXM3SFS16F2 is in the upper right corner of the front panel.
2 Specifications
CAUTION: Do not install fabric modules of different models on the same device. |
Table 1 Module specifications
Item |
Specification |
SDRAM |
4 GB |
Dimensions (H × W × D) |
40 × 853 × 279 MM (1.57 × 33.58 × 10.98 in) |
Power consumption |
123 W to 257 W |
IMPORTANT: · This module can be used only with Type S supervisor engine units (such as LSXM3SUPS2) and Type S interface modules (such as LSXM3TGS48SF2). · To verify the compatibility of the module with the product models and software releases, see the release notes. · Remove the metal protection box from the module before you install the module. · A fan tray covers fabric module slots. You must install the modules before you install the fan trays, and remove the fan trays before you remove the modules. · Follow these instructions to use the ejector levers on the module: ¡ Before you install the module, release the ejector levers by pressing the spring clips. ¡ After the module is fully seated into the slot, press the ejector levers inward until the spring clips lock it in place. ¡ Before you remove the module, release the ejector levers by pressing the spring clips. |
3 Related documentation
For information about installing the module, see the installation guide for the device.
For information about upgrading system software, see the release notes.
Copyright © 2022 New H3C Technologies Co., Ltd.
The information in this document is subject to change without notice.