- Released At: 16-02-2022
- Page Views:
- Downloads:
- Table of Contents
- Related Documents
-
LSXM3CGQ18SF2 18-port 100GBASE QSFP28 Ethernet optical interface module
1 Identifier
The module identifier LSXM3CGQ18SF2 is in the upper right corner of the front panel.
2 Specifications
Table 1 Module specifications
Item |
Specification |
Dimensions (H × W × D) |
50 × 433 × 520 mm (1.97 × 17.05 × 20.47 in) |
SDRAM |
4 GB |
Power consumption |
144 W to 311 W |
Interfaces |
18 × QSFP28 ports |
Transmission rate |
100 Gbps |
IMPORTANT: · This module can be used only with Type S fabric modules (such as LSXM3SFS04G2) and Type S supervisor engine units (such as LSXM3SUP04S2). · To verify the compatibility of the module with the software release you are using, see the release notes. · For information about transceiver modules and cables available for the module, see the cards and transceiver modules compatibility matrixes for the device. |
3 Related documentation
For information about module installation, see the installation guide for the device.
For software upgrade, see the release notes for the device.
Copyright © 2022 New H3C Technologies Co., Ltd.
The information in this document is subject to change without notice.