- Released At: 31-03-2022
- Page Views:
- Downloads:
- Table of Contents
- Related Documents
-
H3C LSXM1TGS24XT24C4Q2TE2 interface module
1 Identifier
The module identifier LSXM1TGS24XT24C4Q2TE2 is in the upper right corner of the front panel.
2 Specifications
Table 1 Module specifications
Item |
Specification |
Dimensions (H × W × D) |
50 × 433 × 520 mm (1.97 × 17.05 × 20.47 in) |
SDRAM |
8 GB |
Power consumption |
193 W to 356 W |
Ports |
· 24 × SFP+ ports · 24 × 1G/10G auto-sensing RJ-45 copper ports · 4 × QSFP28 ports · 2 × QSFP+ ports |
Port transmission rate |
· 100 Gbps · 40 Gbps · 10 Gbps · 1 Gbps |
IMPORTANT: · To verify the compatibility of the module with the software release you are using, see the release notes. · For information about transceiver modules and cables available for the module, see the cards and transceiver modules compatibility matrixes for the device. |
A 1G/10G copper port uses an RJ-45 connector. It provides a maximum transmission distance of 100 m (328.08 ft) over a category 6 shielded twisted pair cable or category 6A or higher twisted pair cable and a maximum transmission distance of 55 m (180.45 ft) over a category 6 unshielded twisted pair cable.
Figure 1 RJ-45 connector
Table 2 RJ-45 connector pin assignment
Pin |
10G/1GBASE-T |
|
Signal |
Function |
|
1 |
MX_0+ |
Transmits and receives data |
2 |
MX_0- |
Transmits and receives data |
3 |
MX_1+ |
Transmits and receives data |
4 |
MX_2+ |
Transmits and receives data |
5 |
MX_2- |
Transmits and receives data |
6 |
MX_1- |
Transmits and receives data |
7 |
MX_3+ |
Transmits and receives data |
8 |
MX_3- |
Transmits and receives data |
3 Related documentation
For information about module installation, see the installation guide for the device.
For software upgrade, see the release notes.
Copyright © 2022 New H3C Technologies Co., Ltd.
The information in this document is subject to change without notice.