LSUM1FAB08XEB0 Card Manual-APW100

HomeSupportResource CenterSwitchesH3C S10500X Switch SeriesH3C S10500X Switch SeriesTechnical DocumentsInstallCard Module ManualsLSUM1FAB08XEB0 Card Manual-APW100
Download Book
Title Size Downloads
LSUM1FAB08XEB0 Card Manual-APW100-book.pdf 34.70 KB
Table of Contents
Related Documents

Switching fabric module - LSUM1FAB08XEB0

1  Card identifier

The card identifier LSUM1FAB08XEB0 is in the upper right corner of the front panel.

2  Specifications

Table 1 Card specifications

Item

Specifications

BootROM

4 MB

SDRAM

2 GB

Card size (H × W × D)

40 × 433 × 318 mm (1.57 ×17.05 × 12.52 in)

Power consumption

65 W to 122 W

Connector type

RJ-45

Ports

1 console port

CAUTION CAUTION:

The port is intended for maintenance and upgrade by H3C technical support engineers. H3C recommends not using it. If the device fails because you operate the port without authorization, H3C shall not be held liable for any consequence caused thereby.

Applicable hardware platforms

S10508XS10508X-V

Applicable host software versions

Release 7585 and Later

 

 

NOTE:

The OFFLINE button on the Switching fabric module is intended for debugging and locating failures by technical supports. H3C recommends not using it without authorization.

 

3  Related documentation

For module installation, see H3C S10500X Switch Series Installation Guide.

For software upgrade, see the release notes for the device.

 

 

Copyright © 2018 New H3C Technologies Co., Ltd.

The information in this document is subject to change without notice.