|00-About the Configuration Guides-book.rar||22.08 MB|
- Table of Contents
- Related Documents
About the H3C S10500X configuration guides
The configuration guides describe the software features for the H3C S10500X switch series, and guide you through the software configuration procedures. These configuration guides also provide configuration examples to help you apply the software features to different network scenarios.
Fundamentals Configuration Guide
Describes how to use the command line interface of the switch, log in to and set up the switch, and use the basic management functions. This guide includes:
· Login management
· FTP and TFTP
· File system management
· Configuration file management
· Software upgrade
· Emergency shell
· Device management
· Management with BootWare
· License management
Virtual Technologies Configuration Guide
Covers virtual technologies. This guide includes:
Interface Configuration Guide
Describes how to configure interfaces. This guide includes:
· Ethernet interface
· Loopback, null, and inloopback interface
Layer 2—LAN Switching Configuration Guide
Describes LAN switching features and tasks for Layer 2 network configuration. You can use these features to divide broadcast domains, remove Layer 2 loops, isolate users within a VLAN, customer network packets transparent to the service provider network, remark VLAN tags, and so on. This guide includes:
· MAC address table
· Ethernet link aggregation
· Port isolation
· VLAN mapping
· Loop detection
· Spanning tree
· Service loopback group
Layer 3—IP Services Configuration Guide
Describes the IP services fundamentals and configuration procedures. You can use these features to configure IP addressing, IP performance optimization, ARP, DNS, UDP helper, and interoperation between IPv4 and IPv6. This guide includes:
· mDNS relay
· IP forwarding basics
· Fast forwarding
· Adjacency table
· IP performance optimization
· IPv6 fast forwarding
· HTTP redirect
Layer 3—IP Routing Configuration Guide
Covers the routing technologies for IPv4 and IPv6 networks of different sizes, route filtering, route control, and policy based routing. This guide includes:
· Basic IP routing
· Static routing
· Policy-based routing
· IPv6 static routing
· IPv6 policy-based routing
· Routing policy
IP Multicast Configuration Guide
Covers Layer 2 and Layer 3 multicast protocols. This guide includes:
· Multicast overview
· IGMP snooping
· PIM snooping
· Multicast VLAN
· Multicast routing and forwarding
· Multicast VPN
· MLD snooping
· IPv6 PIM snooping
· IPv6 multicast VLAN
· IPv6 multicast routing and forwarding
· IPv6 PIM
MPLS Configuration Guide
Describes the fundamentals and configuration procedures for MPLS features, including basic MPLS, LDP, MPLS TE, and MPLS label-based L2VPN and L3VPN. This guide includes:
· Basic MPLS
· Static LSP
· MPLS TE
· Static CRLSP
· Tunnel policy
· MPLS L3VPN
· MPLS L2VPN
· MPLS OAM
ACL and QoS Configuration Guide
Describes how to classify traffic with ACLs, and allocate network resources and manage congestions with QoS technologies to improve network performance and network use efficiency. You can use ACLs to help other function modules (such as QoS and IP routing) classify or filter traffic. This configuration guide includes:
· Time range
· Data buffer
Security Configuration Guide
Covers security features. The major security features available on the switch include: identity authentication, access security authentication, secure management, and attack protection. This guide includes:
· MAC authentication
· Port security
· Password control
· IPsec, IKE, and IKEv2
· Attack detection and prevention
· TCP attack prevention
· IP source guard
· ARP attack protection
· ND attack defense
· 802.1X client
· Web authentication
· Object group
· Triple authentication
High Availability Configuration Guide
Describes high availability technologies and features available on the switch for failure detection and failover. Failure detection technologies focus on fault detection and isolation. Failover technologies focus on network recovery. This guide includes:
· Ethernet OAM
· Smart Link
· Monitor Link
· Reth interface
Network Management and Monitoring Configuration Guide
Describes features that help you manage and monitor your network, for example, manage system events, and test network connectivity. This guide includes:
· Process monitoring and maintenance
· IPv6 NetStream
· Information center
· Packet capture
· VCF fabric
Telemetry Configuration Guide
Describes the application scenarios, fundamentals, and configuration of Telemetry.
Telemetry is a remote data collection technology for monitoring device performance and operating status.
OAA Configuration Guide
Describes the application scenarios, fundamentals, and configuration of the Open Application Platform (OAP) protocol. OAP is used for communication and cooperation between the switch and an OAP module. This guide includes:
· OAP manager
· OAP module
FCoE Configuration Guide
Describes the application scenarios, fundamentals, and configuration of Fibre Channel over Ethernet (FCoE).
FCoE transports FC over Ethernet. In an FCoE solution:
· The server uses an FCoE-capable Ethernet adapter.
· The FCoE forwarder (FCF) switch integrates the functions of both the traditional IP switch and FC switch.
FCoE reduces the number of network adapters, switches, and cables, and the network operation and maintenance workload. In all, FCoE reduces the total cost.
TRILL Configuration Guide
Describes the application scenarios, fundamentals, and configuration of TRansparent Interconnection of Lots of Links (TRILL).
TRILL combines the simplicity and flexibility of Layer 2 switching with the stability, scalability, and rapid convergence capability of Layer 3 routing. All these advantages make TRILL very suitable for large Layer 2 networks in data centers.
EVB Configuration Guide
Describes the application scenarios, fundamentals, and configuration of Edge Virtual Bridging (EVB).
EVB uses a physical switch (called EVB bridge) to switch traffic for VMs on a directly connected physical server (called EVB station). EVB implements traffic policing, network policy enforcement, and unified network deployment and management for VMs.
OpenFlow Configuration Guide
Describes the application scenarios, fundamentals, and configuration of OpenFlow.
OpenFlow allows a controller to directly access and operate the forwarding plane of the switch, separating the control plane from the data plane. The switch matches and forwards packets according to the flow tables issued by the controller. In the same flow table, the switch matches the packets according to the priority of the flow entries. An OpenFlow switch can contain one or more flow tables.
VXLAN Configuration Guide
Describes the application scenarios, fundamentals, and configuration of Virtual eXtensible LAN (VXLAN).
VXLAN is a MAC-in-UDP technology that provides Layer 2 connectivity between distant network sites across an IP network. VXLAN is typically used in data centers and campus access networks for multitenant services.
EVPN Configuration Guide
Describes the application scenarios, fundamentals, and configuration of Ethernet Virtual Private Network (EVPN).
EVPN is a Layer 2 VPN technology, which uses MP-BGP to advertise EVPN routes in the control plane and uses VXLAN for traffic forwarding in the data plane.