Title | Size | Downloads |
---|---|---|
H3C LSEM1SF08C0 Card Manual-APW100-book.pdf | 99.90 KB |
- Table of Contents
- Related Documents
-
H3C LSEM1SF08C0 interface module
1 Identifier
The module identifier LSEM1SF08C0 is in the right of the front panel.
2 Specifications
CAUTION: Do not install fabric modules of different models on the same device. |
Table 1 Module specifications
Item |
Specification |
Dimensions (H × W × D) |
46 × 467 × 273 mm (1.81 × 18.39 × 10.75 in) |
Power consumption |
61 W to 112 W |
IMPORTANT: · To verify the compatibility of the module with the product models and software releases, see the release notes. · A fan tray covers fabric module slots. You must install the modules before you install the fan trays, and remove the fan trays before you remove the modules. · Before installing fabric modules, read the fabric module slot priority description on the rear panel of the chassis carefully and install the fabric modules in order of priority. · Follow these instructions to use the ejector levers on the module: ¡ Before you install the module, release the ejector levers by pressing the spring clips. ¡ After the module is fully seated into the slot, press the ejector levers inward until the spring clips lock it in place. ¡ Before you remove the module, release the ejector levers by pressing the spring clips. · To hot swap a switching fabric module, first press the OFFLINE button on it. |
3 Related documentation
For information about installing the module, see the installation guide for the device.
For information about upgrading system software, see the release notes.
Copyright © 2022 New H3C Technologies Co., Ltd.
The information in this document is subject to change without notice.