H3C LSEM1SF06D0 Card Manual-5PW102

HomeSupportResource CenterSwitchesH3C S10500X-G Switch SeriesH3C S10500X-G Switch SeriesTechnical DocumentsInstall & UpgradeSwitching Fabric Card ManualsH3C LSEM1SF06D0 Card Manual-5PW102
Download Book
Title Size Downloads
H3C LSEM1SF06D0 Card Manual-5PW102-book.pdf 99.92 KB
Table of Contents
Related Documents

LSEM1SF06D0 fabric module

1  Identifier

The module identifier LSEM1SF06D0 is in the upper right corner of the front panel.

2  Specifications



Do not install fabric modules of different models on the same device.


Table 1 Module specifications



Dimensions (H × W × D)

46 × 368 × 198 MM (1.81 × 14.49 × 7.80 in)

Power consumption

55 W to 95 W




·     To verify the compatibility of the module with the product models and software releases, see the release notes.

·     A fan tray covers fabric module slots. You must install the modules before you install the fan trays, and remove the fan trays before you remove the modules.

·     Before installing fabric modules, read the fabric module slot priority description to the right of the slots carefully and install the fabric modules in order of priority.

·     Follow these instructions to use the ejector levers on the module:

¡     Before you install the module, release the ejector levers by pressing the spring clips.

¡     After the module is fully seated into the slot, press the ejector levers inward until the spring clips lock it in place.

¡     Before you remove the module, release the ejector levers by pressing the spring clips.

·     To hot swap a switching fabric module, first press the OFFLINE button on it.


3  Related documentation

For information about installing the module, see the installation guide for the device.

For information about upgrading system software, see the release notes.


Copyright © 2022 New H3C Technologies Co., Ltd.

The information in this document is subject to change without notice.