- Released At: 06-04-2023
- Page Views:
- Downloads:
- Related Documents
-
H3C SecPath M9000-AI NSQM5AIASKB1 AI security engine module
1 Identifier
The module identifier NSQM5AIASKB1 is on the far right of the front panel.
2 About the module
The NSQM5AIASKB1 AI security engine module provides one console port, one management Ethernet copper port, one BMC console port, one BMC network port, two 10GBASE-R-SFP+ fiber ports, one SUV connector, and one USB port.
3 Specifications
Figure 1 Front panel
(1) Ejector lever |
(2) NVMe SSD slots |
(3) 10GBASE-R-SFP+ fiber ports |
(4) USB port |
(5) Console port |
(6) Management Ethernet copper port |
(7) BMC console port |
(8) BMC network port |
(9) UID button/LED |
(10) Power on/standby button |
(11) Captive screw |
(12) System status LED |
(13) BMC network port ACT LED |
(14) BMC network port LINK LED |
(15) Management Ethernet copper port ACT LED |
(16) Management Ethernet copper port LINK LED |
(17) 10GBASE-R-SFP+ fiber port LEDs |
(18) SUV connector |
Table 1 Module specifications
Item |
Specification |
Memory |
128GB DIMMs |
Storage |
1920GB (two 960GB SATA SSDs are provided with the module) Two NVMe SSD slots are on the front panel for storage expansion. You can purchase and install 2TB NVMe SSDs in the slots. |
Number of CPUs |
2 |
Dimensions (H × W × D) |
50.0 × 433 × 520 mm (1.97 × 17.05 × 20.47 in) |
Weight |
8.96 kg (19.75 lb) |
Power consumption |
131 W to 286 W |
Hot swapping |
Supported |
Ports |
· 1 × console port (See Table 2 for port specifications) · 1 × management Ethernet copper port (See Table 3 for port specifications) · 1 × BMC console port (See Table 2 for port specifications) · 1 × BMC network port (See Table 3 for port specifications) · 2 × 10GBASE-R-SFP+ fiber ports · 1 × SUV connector · 1 × USB port |
Available transceiver modules |
10GBASE-R-SFP+ fiber ports: See Table 4. |
Compatible devices and slots |
· M9000-AI-E8 multiservice gateway (slots 0 to 3) · M9000-AI-E16 multiservice gateway (slots 0 to 3 and slots 4 to 7) |
Table 2 Console port/BMC console port specifications
Item |
Specification |
Connector |
RJ-45 |
Interface standard |
RS-232 |
Transmission baud rate |
· Console port: 9600 bps (default) to 115200 bps · BMC console port: 38400 bps (default) |
Transmission medium |
Asynchronous serial cable |
Transmission distance |
≤15 m (49.21 ft) |
Services |
· Provides connection to an ASCII terminal. · Provides connection to the serial port of a local PC running a terminal emulation program. · Supports the command line interface (CLI) |
Table 3 Management Ethernet copper port/BMC network port specifications
Item |
Specification |
Connector |
RJ-45 |
Interface standard |
802.3, 802.3u, and 802.3ab |
Interface type |
MDI/MDIX autosensing |
Transmission medium |
Category-5 or above twisted pair cable |
Transmission distance |
100 m (328.08 ft) |
Transmission rate and duplex mode |
· 10 Mbps, half/full duplex · 100 Mbps, half/full duplex · 1000 Mbps, full duplex |
Table 4 SFP+ transceiver module specifications
Module |
Central wavelength |
Connector type |
Cable specifications |
Maximum transmission distance |
SFP-XG-SX-MM850-A |
850 nm |
LC |
50/125 µm MMF |
300 m (984.25 ft) |
SFP-XG-LX-SM1310 |
1310 nm |
LC |
9/125 µm SMF |
10 km (6.21 miles) |
4 LEDs
The module provides LEDs to indicate the operating status of the module and ports.
Table 5 LED description
LED |
Mark |
Status |
Description |
|
System status LED |
Steady green |
The system is operating correctly. |
||
Flashing green |
HDM is initializing. |
|||
Alternating between yellow and green |
A non-critical alarm has occurred, such as a BMC monitoring alarm or hardware alarm. |
|||
Flashing amber |
A critical alarm has occurred, such as a BMC monitoring alarm, hardware alarm, or CPU exception alarm. |
|||
Management Ethernet copper port LED/BMC network port LED |
LINK ACT |
LINK |
ACT |
|
On |
Flashing |
A link is present on the port and the port is sending and receiving data. |
||
On |
Off |
A link is present on the port. |
||
Off |
Off |
No link is present on the port. |
||
10GBASE-R-SFP+ fiber port LED |
0/1 |
Flashing |
The port is receiving or sending data. |
|
On |
A link is present on the port. |
|||
Off |
No link is present on the port. |
|||
Power on/standby button LED |
Steady green |
The system has started. |
||
Flashing green |
The system is starting. |
|||
Steady amber |
The system is in standby state. |
|||
Flashing amber |
A power anomaly has occurred. |
|||
Off |
No power is present. |
|||
UID button LED |
UID |
On |
The UID LED is activated. |
|
Flashing (1 Hz) |
The system is being managed from HDM or the firmware is being upgraded. |
|||
Flashing (4 Hz) |
HDM is restarting. |
|||
Off |
The UID LED is not activated. |
5 Related documentation
For information about upgrading the module, see the release notes for the device.
For information about installing the module, see the installation guide for the device.
Copyright © 2023 New H3C Technologies Co., Ltd.
The information in this document is subject to change without notice.