H3C SecPath M9000-AI NS-FWEMPA1 Firewall Module Card Manual-6PW101

HomeSupportSecurityH3C SecPath M9000-AI-EInstall & UpgradeService Module Card ManualsH3C SecPath M9000-AI NS-FWEMPA1 Firewall Module Card Manual-6PW101
Download Book

H3C SecPath M9000-AI NS-FWEMPA1 firewall module

1  Identifier

The module identifier NS-FWEMPA1 is in the upper right corner of the front panel.

2  Specifications

The NS-FWEMPA1 firewall module has two console ports and two copper management Ethernet ports.

Figure 1 Front panel

(1) Ejector lever

(2) Console ports (CONSOLE)

(3) Copper management Ethernet ports

(4) USB ports (reserved)

(5) OFL button (reserved)

(6) OFL LED (reserved)

(7) CPU 1 status LED

(8) CPU 0 status LED

(9) Copper management Ethernet port LED (ACT)

(10) Copper management Ethernet port LED (LINK)

 

IMPORTANT

IMPORTANT:

For the module to operate correctly, make sure a minimum of one CPU runs correctly on it.

 

Table 1 Module specifications

Item

Specification

Memory

64GB RDIMMs (Two 16GB RDIMMs per CPU)

Storage

16 GB (8GB per CPU)

CPUs

2

Dimensions (H × W × D)

44 × 191 × 365.3 mm (1.73 × 7.52 × 14.38 in)

Weight

2.38 kg (5.25 lb)

Power consumption

178 W to 205 W

Hot swapping

Not supported

Ports

·     2 × console ports

·     2 × USB ports (reserved)

·     2 × copper management Ethernet ports

Compatible modules and slots

NSQM5MBSHA1 interface switch module (slots 1 and 2)

 

Table 2 Console port specifications

Item

Specification

Connector

RJ-45

Interface standard

RS-232

Transmission baud rate

9600 bps (default) to 115200 bps

Transmission medium

Asynchronous serial cable

Transmission distance

≤15 m (49.21 ft)

Services

·     Provides connection to an ASCII terminal.

·     Provides connection to the serial port of a local PC running a terminal emulation program.

·     Supports the command line interface (CLI)

 

Table 3 Copper management Ethernet port specifications

Item

Specification

Connector

RJ-45

Interface standard

802.3, 802.3u, and 802.3ab

Interface type

MDI/MDIX autosensing

Transmission medium

Category-5 or above twisted pair cable

Transmission distance

100 m (328.08 ft)

Transmission rate and duplex mode

·     10 Mbps, half/full duplex

·     100 Mbps, half/full duplex

·     1000 Mbps, full duplex

 

3  LEDs

Table 4 LED description

LED

Status

Description

CPU status LED (RUN/ALM)

Fast flashing green (0.5 Hz)

Software is being loaded.

Slow flashing green (4 Hz)

The CPU is operating correctly.

Steady red

The CPU is faulty.

Off

The CPU is not operating.

Copper management Ethernet port LED

LINK

ACT

 

Steady on

Flashing

A link is present on the port and the port is sending or receiving data.

Steady on

Off

A link is present on the port.

Off

Off

No link is present on the port.

 

4  Related documentation

For information about software upgrade, see the release notes.

For information about installing the module, see the installation guide for the device.

 

 

Copyright © 2020 New H3C Technologies Co., Ltd.

The information in this document is subject to change without notice.

 

  • Cloud & AI
  • InterConnect
  • Intelligent Computing
  • Security
  • SMB Products
  • Intelligent Terminal Products
  • Product Support Services
  • Technical Service Solutions
All Services
  • Resource Center
  • Policy
  • Online Help
All Support
  • Become a Partner
  • Partner Resources
  • Partner Business Management
All Partners
  • Profile
  • News & Events
  • Online Exhibition Center
  • Contact Us
All About Us
新华三官网