H3C SecPath NS-ADEEMPC0 Application Delivery Engine Module Card Manual-6PW103

HomeSupportSecurityH3C SecPath M9000-AI-EInstall & UpgradeService Module Card ManualsH3C SecPath NS-ADEEMPC0 Application Delivery Engine Module Card Manual-6PW103

H3C SecPath NS-ADEEMPC0 application delivery engine module

1  Identifier

The module identifier NS-ADEEMPC0 is in the upper right corner of the front panel.

2  Specifications

The NS-ADEEMPC0 application delivery engine (ADE) module provides two console ports and two copper management Ethernet ports.

Figure 1 Front panel

(1) Ejector lever

(2) Console ports (CONSOLE)

(3) Copper management Ethernet ports

(4) CPU 0 status LED

(5) CPU 1 status LED

(6) USB port (used for supplying power only)

(7) Offline button (reserved)

(8) Offline LED (reserved)

(9) Copper management Ethernet port LED (ACT)

(10) Copper management Ethernet port LED (LINK)

 

IMPORTANT

IMPORTANT:

For the module to operate correctly, make sure a minimum of one CPU runs correctly on it.

 

Table 1 Module specifications

Item

Specification

Number of CPUs

2

Storage

16 GB (8 GB per CPU)

Memory

64GB RDIMMs (two 16GB RDIMMs per CPU)

Dimensions (H × W × D)

44 × 191 × 365.3 mm (1.73 × 7.52 × 14.38 in)

Weight

2.45 kg (5.40 lb)

Power consumption

156 W to 204 W

Hot swapping

Not supported

Ports

·     2 × console ports

·     2 × USB ports (used for supplying power only)

·     2 × copper management Ethernet ports

Compatible devices and slots

·     M9000-AD6 application delivery appliance (slots 2/1 and 2/2)

·     M9000-AI-E8 multiservice security gateway (NSQM5MBSHA1 interface switch module slots 1 and 2)

·     L5000-AD920 application delivery security gateway (slots 2/1 and 2/2)

 

Table 2 Console port specifications

Item

Specification

Connector

RJ-45

Interface standard

RS-232

Transmission baud rate

9600 bps (default) to 115200 bps

Transmission medium

Asynchronous serial cable

Transmission distance

≤15 m (49.21 ft)

Services

·     Provides connection to an ASCII terminal.

·     Provides connection to the serial port of a local PC running a terminal emulation program.

·     Supports the command line interface (CLI)

 

Table 3 Copper management Ethernet port specifications

Item

Specification

Connector

RJ-45

Interface standard

802.3, 802.3u, and 802.3ab

Interface type

MDI/MDIX autosensing

Transmission medium

Category-5 or above twisted pair cable

Transmission distance

100 m (328.08 ft)

Transmission rate and duplex mode

·     10 Mbps, half/full duplex

·     100 Mbps, half/full duplex

·     1000 Mbps, full duplex

 

3  LEDs

The module provides LEDs to show its operating status.

Table 4 LED description

LED

Status

Description

CPU status LED (RUN/ALM)

Slow flashing green (1 Hz)

The CPU is operating correctly.

Fast flashing green (4 Hz)

Software is being loaded.

Off

The CPU is not operating.

Copper management Ethernet port LED

LINK

ACT

 

On

Flashing

A link is present on the port and the port is sending or receiving data.

On

Off

A link is present on the port.

Off

Off

No link is present on the port.

 

4  Related documentation

For information about software upgrade, see the release notes.

For information about installing the module, see the installation guide for the device.

 

 

Copyright © 2022 New H3C Technologies Co., Ltd.

The information in this document is subject to change without notice.

 

  • Cloud & AI
  • InterConnect
  • Intelligent Computing
  • Security
  • SMB Products
  • Intelligent Terminal Products
  • Product Support Services
  • Technical Service Solutions
All Services
  • Resource Center
  • Policy
  • Online Help
All Support
  • Become a Partner
  • Partner Resources
  • Partner Business Management
All Partners
  • Profile
  • News & Events
  • Online Exhibition Center
  • Contact Us
All About Us
新华三官网