- Released At: 17-10-2023
- Page Views:
- Downloads:
- Table of Contents
- Related Documents
-
H3C SecPath NS-C600-CGQ6A1 interface module
1 Identifier
The module identifier NS-C600-CGQ6A1 is in the upper right corner of the front panel.
2 About the module
The NS-C600-CGQ6A1 interface module provides six 100-GE fiber ports.
3 Specifications
Figure 1 Front panel
(1) Ejector lever |
(2) 100-GE fiber ports |
(3) 100-GE fiber port LEDs |
Table 1 Module specifications
Item |
Specification |
Dimensions (H × W × D) |
44 × 191 × 365.3 mm (1.73 × 7.52 × 14.38 in) |
Power consumption |
10 W to 42 W |
Net weight |
1.42 kg (3.13 lb) |
Hot swapping |
Not supported |
Ports |
6 × 100GBASE-R QSFP28 fiber ports |
Connector type |
LC/MPO |
Available transceiver modules |
|
Compatible interface switch modules and slots |
· M9000-X06 multiservice security gateway (NSQM7MBSHA0 interface switch module slots 1 and 2) · M9000-X10 multiservice security gateway (NSQM7MBSHA0 interface switch module slots 1 and 2) · M9000-X06-B multiservice security gateway (NSQM7MBSHA0 interface switch module slots 1 and 2) · M9000-X06 multiservice security gateway (NSQM7MBSHB0 interface switch module slots 1 and 2) · M9000-AI-E8 multiservice security gateway (NSQM7MBSHB0 interface switch module slots 1 and 2) · M9000-AI-E16 multiservice security gateway (NSQM7MBSHB0 interface switch module slots 1 and 2) · T9000-E8 IPS (NSQM7MBSHB0 interface switch module slots 1 and 2) |
The 100-GE fiber ports support QSFP+ transceiver modules described in Table 2 and QSFP28 transceiver modules described in Table 3.
Table 2 QSFP+ transceiver modules available for the 100GBASE-R QSFP28 fiber ports
Module |
Central wavelength (nm) |
Connector type |
Cable specifications (µm) |
Modal bandwidth (MHz × km) |
Maximum transmission distance |
QSFP-40G-SR4-MM850 |
850 |
MPO |
50/125, MMF |
2000 |
100 m (328.08 ft) |
QSFP-40G-LR4-WDM1300 |
1310 |
LC |
9/125, SMF |
N/A |
10 km (6.21 miles) |
QSFP-40G-CSR4-MM850 |
850 |
MPO |
50/125, MMF |
2000 |
300 m (984.25 ft) |
QSFP-40G-LR4L-WDM1300 |
1310 |
LC |
9/125, SMF |
N/A |
2 km (1.24 miles) |
QSFP-40G-ER4-WDM1300 |
1310 |
LC |
9/125, SMF |
N/A |
2 km (1.24 miles) |
QSFP-40G-BIDI-WDM850 |
850 |
LC |
50/125, MMF |
2000 |
300 m (984.25 ft) |
QSFP-40G-BIDI-SR-MM850 |
850 |
LC |
50/125, MMF |
2000 |
100 m (328.08 ft) |
|
NOTE: All 100-GE fiber ports on the NS-C600-CGQ6A1 interface module support 40 Gbps autosensing. |
Table 3 QSFP28 transceiver modules available for the 100GBASE-R QSFP28 fiber ports
Module |
Central wavelength (nm) |
Connector type |
Cable specifications (µm) |
Maximum transmission distance |
QSFP-100G-eSR4-MM850 |
850 |
MPO |
50/125, MMF |
300 m (984.25 ft) |
QSFP-100G-SWDM4-MM850 |
850 |
LC |
50/125, MMF |
100 m (328.08 ft) |
QSFP-100G-SR4-MM850 |
850 |
MPO |
50/125, MMF |
100 m (328.08 ft) |
QSFP-100G-LR4-WDM1300 |
1310 |
LC |
9/125, SMF |
10 km (6.21 miles) |
QSFP-100G-LR4L-WDM1300 |
1310 |
LC |
9/125, SMF |
2 km (1.24 miles) |
QSFP-100G-ER4L-WDM1300 |
1310 |
LC |
9/125, SMF |
40 km (24.86 miles) |
QSFP-100G-ER4-WDM1300 |
1300 |
LC |
9/125 µm, SMF |
40 km (24.86 miles) |
4 LEDs
The module provides a LED for each 100-GE fiber port to indicate their operating status.
Table 4 100-GE fiber port LED description
Status |
Description |
Flashing |
The port is sending or receiving data. |
Steady on |
A link is present on the port. |
Off |
No link is present on the port. |
5 Related documentation
For information about installing the module, see the installation guide for the device.
Copyright © 2023 New H3C Technologies Co., Ltd.
The information in this document is subject to change without notice.