1 Identifier

The module identifier NS-C300-TG24A1 is in the upper right corner of the front panel.

2 Specifications

The NS-C300-TG24A1 interface module provides twenty-four 10-GE fiber ports.

Figure 1 Front panel

(1) Ejector lever	(2) 10-GE fiber ports
(3) 10-GE fiber port LEDs

Table 1 Module specifications

Item	Specification
Dimensions (H × W × D)	44 × 191 × 365.3 mm (1.73 × 7.52 × 14.38 in)
Power consumption	5 W to 36 W
Net weight	1.52 kg (3.35 lb)
Hot swapping	Not supported
Ports	24 × 10GBASE-R SFP+ fiber ports
Connector type	LC
Available transceiver modules	See Table 2 and Table 3
Compatible interface switch modules and slots	· M9000-AI-E8 multiservice security gateway (NSQM5MBSHA1 interface switch module slots 1 and 2) · M9000-AI-E16 multiservice security gateway (NSQM5MBSHA1 interface switch module slots 1 and 2) · T9000-E8 IPS (NSQM5MBSHA1 interface switch module slots 1 and 2) · M9000-X06 multiservice security gateway (NSQM5MBSHA0 interface switch module slots 1 and 2) · M9000-X10 multiservice security gateway (NSQM5MBSHA0 interface switch module slots 1 and 2) · M9000-X06 multiservice security gateway (NSQM7MBSHB0 interface switch module slots 1 and 2)

The 10-GE fiber ports support SFP transceiver modules and cables described in Table 2 and SFP+ transceiver modules described in Table 3.

Transceiver module or cable	Central wavelength (nm)	Connector type	Cable specifications (µm)	Maximum transmission distance
SFP-GE-SX-MM850-A	850	LC	50/125, multi-mode optical fiber (MMF)	550 m (1804.46 ft)
SFP-GE-SX-MM850-D	850	LC	50/125, MMF	550 m (1804.46 ft)
SFP-GE-LX-SM1310-A	1310	LC	9/125, single-mode optical fiber (SMF)	10 km (6.21 miles)
SFP-GE-LX-SM1310-D	1310	LC	9/125, SMF	10 km (6.21 miles)
SFP-GE-LH40-SM1310	1310	LC	9/125, SMF	40 km (24.86 miles)
SFP-GE-LH40-SM1310-D	1310	LC	9/125, SMF	40 km (24.86 miles)
SFP-GE-LH40-SM1550	1550	LC	9/125, SMF	40 km (24.86 miles)
SFP-GE-LH80-SM1550	1550	LC	9/125, SMF	80 km (49.71 miles)
SFP-GE-LH80-SM1550-D	1550	LC	9/125, SMF	80 km (49.71 miles)
SFP-GE-LH100-SM1550	1550	LC	9/125, SMF	100 km (62.14 miles)
SFP-GE-T	N/A	RJ-45	Category-5 twisted pair cable	100 m (328.08 ft)
SFP-GE-T-D	N/A	RJ-45	Category-5 twisted pair cable	100 m (328.08 ft)

NOTE:

All 10-GE fiber ports on the NS-C300-TG24A1 interface module support 1000 Mbps autosensing.

Module	Central wavelength	Connector type	Cable specifications	Maximum transmission distance
SFP-XG-SX-MM850-A	850 nm	LC	50/125 µm, MMF	300 m (984.25 ft)
SFP-XG-SX-MM850-D	850 nm	LC	50/125 µm, MMF	300 m (984.25 ft)
SFP-XG-SX-MM850-E	850 nm	LC	50/125 µm, MMF	300 m (984.25 ft)
SFP-XG-LX-SM1310	1310 nm	LC	9/125 µm, SMF	10 km (6.21 miles)
SFP-XG-LX-SM1310-D	1310 nm	LC	9/125 µm, SMF	10 km (6.21 miles)
SFP-XG-LX-SM1310-E	1310 nm	LC	9/125 µm, SMF	10 km (6.21 miles)
SFP-XG-LH40-SM1550	1550 nm	LC	9/125 µm, SMF	40 km (24.85 miles)
SFP-XG-LH40-SM1550-D	1550 nm	LC	9/125 µm, SMF	40 km (24.85 miles)
SFP-XG-LH80-SM1550	1550 nm	LC	9/125 µm, SMF	80 km (49.71 miles)
SFP-XG-LH80-SM1550-D	1550 nm	LC	9/125 µm, SMF	80 km (49.71 miles)

The module provides a LED for each 10-GE fiber port to indicate their operating status.

Table 4 10-GE fiber port LED description

Status	Description
Flashing	The port is sending or receiving data.
Steady on	A link is present on the port.
Off	No link is present on the port.

For information about installing the module, see the installation guide for the device.

The information in this document is subject to change without notice.