- Released At: 06-12-2022
- Page Views:
- Downloads:
- Table of Contents
- Related Documents
-
H3C CR-19K-SFU-16C single-chassis fabric module
1 Identifier
The module identifier CR-19K-SFU-16C is on the far right of the front panel.
2 About the module
The CR-19K-SFU-16C fabric module is applicable to the CR19000-16 core router. It switches data between interface modules.
Figure 1 Front panel
(1) RUN/ALM LED |
(2) Module identifier (CR-19K-SFU-16C) |
Table 1 Module specifications
Item |
Specifications |
Dimensions (H × W × D) |
40 × 853 × 279 mm (1.57 × 33.58 × 10.98 in) |
Power consumption |
308 W |
Hot swapping |
Supported |
Compatible devices |
CR19000-16 |
IMPORTANT: To verify compatibility of the module with the software release you are using, see the release notes. |
3 Related documentation
For information about installing the module, see H3C CR19000-16 Core Router Installation Guide.
For information about upgrading system software, see the release notes.
Copyright © 2022 New H3C Technologies Co., Ltd.
The information in this document is subject to change without notice.