Login
- Released At: 13-12-2022
- Page Views:
- Downloads:
- Table of Contents
- Related Documents
-
H3C CR-19K-MSFU-08A multi-chassis fabric module
1 Identifier
The module identifier CR-19K-MSFU-08A is on the far left of the front panel.
2 About the module
The CR-19K-MSFU-08A fabric module is applicable to the CR19000-8 core router.
Figure 1 Front panel
|
(1) Module identifier (CR-19K-MSFU-08A) |
(2) Running status LED (RUN) |
|
(3) OFL button |
(4) Cluster ports and LEDs 1 to 6 |
Table 1 Module specifications
|
Item |
Specifications |
|
Dimensions (H × W × D) |
40 × 284 × 521 mm (1.57 × 11.18 × 20.51 in) |
|
Power consumption |
135 W |
|
Hot swapping |
Supported |
|
Ports |
6 × cluster ports (QSFP+/QSFP28) |
|
Compatible devices |
CR19000-8 (in a back-to-back cluster) |
|
|
IMPORTANT: · Do not connect 40G QSFP+ and 100G QSFP28 optical fibers to the same fabric module. · To verify compatibility of the module with the software release you are using, see the release notes. · For the transceiver modules and cables available for the fabric module, see H3C CR19000 Core Routers Modules and Transceivers Compatibility Matrixes. |
Copyright © 2022 New H3C Technologies Co., Ltd.
The information in this document is subject to change without notice.
