- Released At: 29-12-2022
- Page Views:
- Downloads:
- Table of Contents
- Related Documents
-
H3C CR-19K-LPU-SP flexible service processing module
1 Identifier
The module identifier CR-19K-LPU-SP is on the far right of the front panel.
2 About the module
The CR-19K-LPU-SP flexible service processing module does not provide ports. It supports the IPSec, NAT, and NetStream features.
Figure 1 Front panel
(1) Module identifier (CR-19K-LPU-SP) |
(2) Running status LED (RUN) |
Table 1 Module specifications
Item |
Specifications |
Ports |
N/A |
Dimensions (H × W × D) |
50 × 433 × 520 mm (1.97 × 17.05 × 20.47 in) |
Power consumption |
143 W |
Hot swapping |
Supported |
IMPORTANT: · To verify compatibility of the module with the software release you are using, see the release notes. · For compatibility between the router and the interface module, see hardware information and specifications for the router. |
Copyright © 2022 New H3C Technologies Co., Ltd.
The information in this document is subject to change without notice.