- Released At: 06-12-2022
- Page Views:
- Downloads:
- Table of Contents
- Related Documents
-
H3C CR-19K-MPU-08A main processing unit
1 Identifier
The module identifier CR-19K-MPU-08A is on the far left of the front panel.
2 About the MPU
The CR-19K-MPU-08A main processing unit (MPU) is applicable to the CR19000-8 core router. It provides the following functionalities:
· Route calculation and forwarding table maintenance.
· System configuration, control, and monitoring. On the MPU, you can monitor, upgrade software, and reset a module.
· Real-time clock (RTC) that keeps tracks of the current time, providing seconds, minutes, hours, day, date, month, and year information.
· Support for active/standby switchover when two MPUs are installed on the router.
\
IMPORTANT: · If you install two MPUs for the router, make sure they are the same model. · Management ports 2 and 3 are used for control plane connection in cluster mode. |
Figure 1 Front panel
(1) Module identifier (CR-19K-MPU-08A) |
(2) Console ports (CONSOLE) |
(3) 10/100/1000BASE-T ports and LEDs |
(4) 1000BASE-X-SFP ports and LEDs |
(5) USB host port |
(6) Fan tray status LED |
(7) Power supply status LED |
(8) Module status LED |
(9) System alarm LED |
(10) MPU active/standby status LED |
(11) Reset button |
Table 1 MPU specifications
Item |
Specifications |
Processor |
Quad-core @ 1.2 GHz |
DRAM size |
16 GB |
Dimensions (H × W × D) |
45 × 284 × 512 mm (1.77 × 11.18 × 20.16 in) |
Power consumption |
45 W |
Hot swapping |
Supported |
Ports |
· 1 × serial console port · 1 × mini-USB console port (Type mini-B) · 2 × 10/100/1000BASE-T ports · 2 × 1000BASE-X-SFP ports · 1 × USB 2.0 port (Type A, host mode) |
Interface transmission rate |
· Console port: 9600 (default) to 115080 bps · 10/100/1000BASE-T port: 10/100/1000 Mbps · 1000BASE-X-SFP port: 1000 Mbps |
Reset button |
1 |
IMPORTANT: · To verify compatibility of the MPU with the software release you are using, see the release notes. · For the transceiver modules and cables available for the MPU, see H3C CR19000 Core Routers Modules and Transceivers Compatibility Matrixes. |
3 Related documentation
For information about installing the MPU, see H3C CR19000-8 Core Router Installation Guide.
For information about upgrading system software, see the release notes.
Copyright © 2022 New H3C Technologies Co., Ltd.
The information in this document is subject to change without notice.