- Released At: 13-12-2022
- Page Views:
- Downloads:
- Table of Contents
- Related Documents
-
H3C CR-HIC-PHP08 POS optical interface card
1 Identifier
The module identifier CR-HIC-PHP08 is in the upper right corner of the front panel.
2 About the module
The CR-HIC-PHP08 155M/622M POS optical interface card provides eight SFP ports and provides the following features:
· Supports the SDH STM-4C/1C and SONET OC-12C/3C frame formats at the physical layer.
· Supports line clock and internal clock with stratum level of 3.
· Supports data loopback, external SONET/SDH loopback, and external line loopback.
· The module is hot swappable.
Figure 1 Front panel
(1) Port type label (POS-OC12c/OC3c-SFP) |
(2) Module identifier (CR-HIC-PHP08) |
(3) 155M/622M POS SFP ports and LEDs 1 to 8 |
Table 1 Module specifications
Item |
Specifications |
Dimensions (H × W × D) |
21 × 195 × 162 mm (0.83 × 7.68 × 6.38 in) |
Power consumption |
20 W |
Ports |
8 × 155M/622M POS SFP ports |
Connector type |
LC |
Interface transmission rate |
155.52/622.08 Mbps |
Port property |
Depends on the SFP transceiver module installed |
Hot swapping |
Supported |
IMPORTANT: · To verify compatibility of the module with the software release you are using, see the release notes. · For interface card compatibility with the interface modules, see the hardware information and specifications for the device. · For the transceiver modules and cables available for the interface card, see H3C CR19000 Core Routers Modules and Transceivers Compatibility Matrixes. |
Copyright © 2022 New H3C Technologies Co., Ltd.
The information in this document is subject to change without notice.