Login
- Released At: 13-12-2022
- Page Views:
- Downloads:
- Table of Contents
- Related Documents
-
H3C CR-HIC-CLP04 CPOS optical interface card
1 Identifier
The module identifier CR-HIC-CLP04 is in the upper right corner of the front panel.
2 About the module
The CR-HIC-CLP04 155M CPOS optical interface card provides four SFP ports and provides the following features:
· Supports the SDH STM-1 frame format at the physical layer, can operate in E1 mode, and supports timeslot bundling.
· Supports line clock and internal clock with stratum level of 3.
· Supports data loopback, external SDH loopback, and external line loopback.
· The module is hot swappable.
Figure 1 Front panel
|
(1) Port type label (CPOS-OC3/STM1-SFP) |
(2) 155M CPOS SFP ports and LEDs 1 to 4 |
|
(3) Module identifier (CR-HIC-CLP04) |
|
Table 1 Module specifications
|
Item |
Specifications |
|
Dimensions (H × W × D) |
21 × 195 × 162 mm (0.83 × 7.68 × 6.38 in) |
|
Power consumption |
17 W |
|
Ports |
4 × 155M CPOS SFP ports |
|
Connector type |
LC |
|
Interface transmission rate |
155.52 Mbps |
|
Port property |
Depends on the SFP transceiver module installed. |
|
Hot swapping |
Supported |
|
|
IMPORTANT: · To verify compatibility of the module with the software release you are using, see the release notes. · For interface card compatibility with the interface modules, see the hardware information and specifications for the device. · For the transceiver modules and cables available for the interface card, see H3C CR19000 Core Routers Modules and Transceivers Compatibility Matrixes. |
Copyright © 2022 New H3C Technologies Co., Ltd.
The information in this document is subject to change without notice.
