- Released At: 13-12-2022
- Page Views:
- Downloads:
- Table of Contents
- Related Documents
-
H3C CR-HIC-CC01 Ethernet optical interface card
1 Identifier
The module identifier CR-HIC-CC01 is in the upper right corner of the front panel.
2 About the module
The CR-HIC-CC01 100G Ethernet optical interface card provides a CFP2 port and supports 100G CFP2 transceiver modules.
Figure 1 Front panel
(1) Port type label (100GBASE-R-CFP2) |
(2) 100GBASE-R-CFP2 Ethernet port and LED |
(3) Module identifier (CR-HIC-CC01) |
Table 1 Module specifications
Item |
Specifications |
Dimensions (H × W × D) |
21 × 195 × 162 mm (0.83 × 7.68 × 6.38 in) |
Power consumption |
25 W |
Ports |
1 × 100GBASE-R-CFP2 port |
Connector type |
LC, MPO |
Interface transmission rate |
103.125 Gbps |
Port property |
Depends on the CFP2 transceiver module installed. |
Hot swapping |
Supported |
IMPORTANT: · To verify compatibility of the module with the software release you are using, see the release notes. · For interface card compatibility with the interface modules, see the hardware information and specifications for the device. · For the transceiver modules and cables available for the interface card, see H3C CR19000 Core Routers Modules and Transceivers Compatibility Matrixes. |
Copyright © 2022 New H3C Technologies Co., Ltd.
The information in this document is subject to change without notice.