Login
- Released At: 13-10-2022
- Page Views:
- Downloads:
- Table of Contents
- Related Documents
-
|
|
|
H3C CR16000-M Router Series |
|
POS Interface Module Datasheet |
|
|
|
|
Copyright © 2022 New H3C Technologies Co., Ltd. All rights reserved.
No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of New H3C Technologies Co., Ltd.
Except for the trademarks of New H3C Technologies Co., Ltd., any trademarks that may be mentioned in this document are the property of their respective owners.
The information in this document is subject to change without notice.
Contents
Overview
The following POS interface modules are available for the CR16000-M routers.
Table 1 POS interface modules available for the CR16000-M routers
|
Module model |
Description |
|
MIC-PSP4L-M |
4-port OC-48c/STM-16c (2.5G) POS optical interface module |
|
MIC-SP4L-M |
4-port OC-3c/STM-1c (155M) POS/ATM or 1-port OC-12c/STM-4c (622M) POS/ATM optical interface module |
|
MIC-TCP8L-M |
8-port OC-3c/OC-12c (622M/155M) POS/GE optical interface module |
Key features
PPP/HDLC encapsulation
The POS interfaces support two types of link encapsulation: PPP and HDLC, and support the configuration of scrambling, CRC-32 or CRC-16, frame format, and path trace bytes. With PPP encapsulation, the POS interfaces support the PAP and CHAP authentication modes.
Super interface module
As a super interface module, the MIC-TCP8L-M interface module supports flexible configuration of POS and GE interfaces.
Multi-rate POS interfaces
CR16000-M routers provide multi-rate POS interfaces to support OC-3/STM-1, OC-12/STM-4, and OC-48/STM-16 to meet various networking requirements.
For information about the features of the GE interfaces on a POS interface module, see H3C CR16000-M Routers Ethernet Interface Module Datasheet.
Specifications
The figures in this section are for illustration only.
MIC-PSP4L-M
Front panel
Figure 2 MIC-PSP4L-M front panel
|
(1) OC-48c/STM-16c POS fiber ports (4 in total) |
(2) Module status LED (see Table 2 for the description) |
|
(3) Port LED (see Table 3 for the description) |
|
Technical specifications
|
Item |
Specifications |
|
Dimensions (H × W × D) |
22 × 214 × 262 mm (0.87 × 8.43 × 10.32 in) |
|
Power consumption |
40 W to 50 W |
|
Ports |
4 × OC-48c/STM-16c-SFP POS fiber ports |
|
Connector type |
LC |
|
Port speed |
2.5 Gbps (OC-48c/STM-16c) |
MIC-SP4L-M
Front panel
Figure 4 MIC-SP4L-M front panel
|
(1) OC-3c/STM-1c POS/ATM fiber port (port 1) or OC-12c/STM-4c POS/ATM fiber ports (4 in total) |
|
|
(2) Module status LED (see Table 2 for the description) |
(3) Port LED (see Table 3 for the description) |
Technical specifications
|
Item |
Specifications |
|
Dimensions (H × W × D) |
22 × 214 × 262 mm (0.87 × 8.43 × 10.32 in) |
|
Power consumption |
32 W to 5 W |
|
Ports |
· 4 × OC-3c/STM-1c-SFP POS/ATM fiber ports · 1 × OC-12c/STM-4c-SFP POS/ATM fiber port
Only port 1 can be configured as an OC-12c/STM-4c-SFP POS/ATM fiber port. The module does not support switching to the ATM mode. |
|
Connector type |
LC |
|
Port speed |
· 155 Mbps (OC-3c/STM-1c) · 622 Mbps (OC-12c/STM-4c) |
MIC-TCP8L-M
Front panel
Figure 6 MIC-TCP8L-M front panel
|
(1) OC-3c/OC-12c POS/GE fiber ports (8 in total) |
(2) Module status LED (see Table 2 for the description) |
|
(3) Port LED (see Table 3 for the description) |
|
Technical specifications
|
Item |
Specifications |
|
Dimensions (H × W × D) |
22 × 214 × 262 mm (0.87 × 8.43 × 10.32 in) |
|
Power consumption |
43 W to 45 W |
|
Ports |
8 × OC-3c/STM-1c, OC-12c/STM-4c, or 1000BASE-X-SFP POS/GE fiber ports |
|
Connector type |
LC |
|
Port speed |
· 155 Mbps (OC-3c/STM-1c) · 622 Mbps (OC-12c/STM-4c) · 1000 Mbps |
LEDs
Table 2 Module status LED description
|
Mark |
Status |
Description |
|
RUN |
Flashing at 0.5 Hz |
The interface module is operating correctly. |
|
Fast flashing at 4 Hz |
The interface module is loading software. If the LED keeps flashing fast, software loading fails. |
|
|
On |
The interface module is faulty. |
|
|
Off |
The interface module is faulty or is not powered on. |
|
Mark |
Status |
Description |
|
ACT/ALM |
Flashing green |
The port is sending or receiving data. |
|
Steady green |
A link is present. |
|
|
Steady red |
An alarm has occurred. |
|
|
Off |
No link is present. |
Environment requirements
Make sure the ambient environment meets the following requirements:
· Temperature and humidity requirements
Table 4 Temperature and humidity requirements
|
Item |
Specifications |
|
Operating temperature |
0°C to 45°C (32°F to 113°F) |
|
Storage temperature |
–40°C to +70°C (–40°F to +158°F) |
|
Operating humidity |
5% RH to 95% RH, non-condensing |
|
Storage humidity |
5% RH to 95% RH, non-condensing |
· Dust protection requirements
Table 5 Dust concentration limits in the equipment room
|
Substance |
Particle diameter |
Concentration limit |
|
Dust particles |
≥ 0.5 µm |
≤ 1.8 × 107 particles/m3 |
· Corrosive gas protection requirements
Table 6 Corrosive gas concentration limits in the equipment room
|
Gas |
Average concentration (mg/m3) |
Maximum concentration (mg/m3) |
|
SO2 |
0.3 |
1.0 |
|
H2S |
0.1 |
0.5 |
|
Cl2 |
0.1 |
0.3 |
|
HCI |
0.1 |
0.5 |
|
HF |
0.01 |
0.03 |
|
NH3 |
1.0 |
3.0 |
|
O3 |
0.05 |
0.1 |
|
NOX |
0.5 |
1.0 |
