Login
- Released At: 12-12-2022
- Page Views:
- Downloads:
- Table of Contents
- Related Documents
-
|
|
|
H3C CR16000-F Series |
|
CEPC Module Datasheet |
|
|
|
|
Copyright © 2016 to 2022 New H3C Technologies Co., Ltd. All rights reserved.
No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of New H3C Technologies Co., Ltd.
Except for the trademarks of New H3C Technologies Co., Ltd., any trademarks that may be mentioned in this document are the property of their respective owners.
The information in this document is subject to change without notice.
Contents
Overview
The following CEPC modules are available for the CR16000-F routers.
Table 1 CEPC modules available for the CR16000-F routers
|
Module model |
Description |
|
CEPC-XP48RX |
48-port 10GBASE-R/W Ethernet optical interface module (SFP+, LC) |
|
CEPC-XP24LX |
24-port 10GBASE-R/W Ethernet optical interface line processing unit (SFP+, LC) |
|
CEPC-XP4LX |
4-port 10GBASE-R/W Ethernet optical interface line processing unit module (SFP+, LC) |
|
CEPC-CP4RX |
4-port 100GBASE Ethernet optical interface module (CFP2) |
|
CEPC-CP4RXA |
4-port 100GBASE Ethernet optical interface line processing unit A (CFP2) |
|
CEPC-CP4RX-L |
4-port 100G Ethernet optical interface line processing unit (QSFP28, LC) |
|
CEPC-CQ8L |
8-port 100G Ethernet optical interface line processing unit (QSFP28, LC) |
|
CEPC-CQ8LA |
8-port 100G Ethernet optical interface line processing unit A (QSFP28, LC) |
|
CEPC-CQ16L1 |
16-port 100G Ethernet optical interface line processing unit (QSFP28, LC) |
|
|
NOTE: For compatibility between CEPC modules and switching fabric modules, see Appendix B FRUs and compatibility matrixes in H3C CR16000-F Routers Installation Guide. |
Key features
200 ms of packet buffering
The CEPC can provide 200 ms of packet buffering, which enables 100% egress bandwidth usage and improves network performance.
Hot swapping
The module is hot swappable. Installing and removing the module on an operating router does not affect ongoing services on other modules. The management system monitors the module in real time and implements automated configuration for the module to ensure service continuity.
Distributed NAT
With support for distributed NAT architecture. twice NAT, and multiple-instance NAT instances, the modules can share NAT loads to improve NAT performance.
Distributed NetStream
With distributed NetStream performed on each CEPC module, the module can greatly improve statistical analysis efficiency. In addition, it offers packet filtering, packet sampling, statistics aggregation, and statistics export to improve processing efficiency.
Specifications
The figures in this section are for illustration only.
CEPC-XP48RX
Front panel
Figure 2 CEPC-XP48RX front panel
|
(1) 10GBASE-R-SFP+ fiber ports (48 in total) |
(2) Port status LED |
Technical specifications
|
Item |
Specifications |
|
Dimensions (H × W × D) |
40 × 399 × 352 mm (1.57 × 15.71 × 13.86 in) |
|
Power consumption |
235 W to 407 W |
|
Ports |
48 |
|
Connector type |
LC |
|
Port speed |
10 Gbps |
|
Applicable software versions |
7313 or later |
CEPC-XP24LX
Figure 3 CEPC-CXP24LX
Front panel
Figure 4 CEPC-XP24LX front panel
|
(1) 10GBASE-R/W-SFP+ fiber ports (24 in total) |
(2) Port status LED |
Technical specifications
|
Item |
Specifications |
|
Dimensions (H × W × D) |
40 × 399 × 352 mm (1.57 × 15.71 × 13.86 in) |
|
Power consumption |
238 W to 321 W |
|
Ports |
24 |
|
Connector type |
LC |
|
Port speed |
10 Gbps |
|
Applicable software versions |
7601 or later |
CEPC-XP4LX
Figure 5 CEPC-XP4LX
Front panel
Figure 6 CEPC-XP4LX front panel
|
(1) 10GBASE-R/W-SFP+ fiber ports (4 in total) |
(2) Port status LED |
Technical specifications
|
Item |
Specifications |
|
Dimensions (H × W × D) |
40 × 399 × 352 mm (1.57 × 15.71 × 13.86 in) |
|
Power consumption |
102 W to 178 W |
|
Ports |
4 |
|
Connector type |
LC |
|
Port speed |
10 Gbps |
|
Applicable software versions |
7751 or later |
CEPC-CP4RX/CEPC-CP4RXA
The CEPC-CP4RX and CEPC-CP4RXA are similar in appearance. This section uses the CEPC-CP4RX as an example.
Figure 7 CEPC-CP4RX
Front panel
Figure 8 CEPC-CP4RX front panel
|
(1) 100GBASE-R-CFP2 fiber ports (4 in total) |
(2) Port status LED |
Technical specifications
|
Item |
Specifications |
|
Dimensions (H × W × D) |
40 × 399 × 352 mm (1.57 × 15.71 × 13.86 in) |
|
Power consumption |
229 W to 368 W |
|
Ports |
4 |
|
Connector type |
LC |
|
Port speed |
100 Gbps |
|
Applicable software versions |
· CEPC-CP4RX: 7313 or later · CEPC-CP4RXA: 7951P01 or later |
CEPC-CP4RX-L
Figure 9 CEPC-CP4RX-L
Front panel
Figure 10 CEPC-CP4RX-L front panel
|
(1) 100GBASE-QSFP28 fiber ports (4 in total) |
(2) Port status LED |
Technical specifications
|
Item |
Specifications |
|
Dimensions (H × W × D) |
40 × 399 × 352 mm (1.57 × 15.71 × 13.86 in) |
|
Power consumption |
191 W to 354 W |
|
Ports |
4 |
|
Connector type |
LC |
|
Port speed |
· 40 Gbps · 100 Gbps |
|
Applicable software versions |
7751 or later |
CEPC-CQ8L/CEPC-CQ8LA
The CEPC-CQ8L and CEPC-CQ8L are similar in appearance. This section uses the CEPC-CQ8L as an example.
Figure 11 CEPC-CQ8L
Front panel
Figure 12 CEPC-CQ8L front panel
|
(1) 100GBASE-QSFP28 fiber ports (8 in total, support for 100G QSFP28 transceiver modules) |
|
(2) QSFP28 port status LED |
Technical specifications
|
Item |
Specifications |
|
Dimensions (H × W × D) |
52.5 × 399 × 370 mm (2.07 × 15.71 × 14.57 in) |
|
Power consumption |
695 W to 1100 W |
|
Ports |
8 × 100GBASE-R-QSFP28 fiber ports |
|
Connector type |
LC |
|
Port speed |
100 Gbps |
|
Applicable software versions |
· CEPC-CQ8L: 8216 or later · CEPC-CQ8LA: 8385P09 or later |
CEPC-CQ16L1
Figure 13 CEPC-CQ16L1
Front panel
Figure 14 CEPC-CQ16L1 front panel
|
(1) 100GBASE-QSFP28 fiber ports (8 in total, support for 100G QSFP28 transceiver modules) |
|
(2) QSFP28 port status LED |
Technical specifications
|
Item |
Specifications |
|
Dimensions (H × W × D) |
52.5 × 399 × 370 mm (2.07 × 15.71 × 14.57 in) |
|
Power consumption |
764 W to 1300 W |
|
Ports |
16 × 100GBASE-R-QSFP28 fiber ports |
|
Connector type |
LC |
|
Port speed |
100 Gbps |
|
Applicable software versions |
8385P09 or later |
LEDs
Table 2 SFP+/CFP2/QSFP28 port status LED description
|
Status |
Description |
|
Flashing |
The port is receiving or transmitting data. |
|
On |
A link is present. |
|
Off |
No link is present. |
Environment requirements
Make sure the ambient environment meets the following requirements:
· Temperature and humidity requirements
Table 3 Temperature and humidity requirements
|
Item |
Specifications |
|
Operating temperature |
0°C to 45°C (32°F to 113°F) |
|
Storage temperature |
–40°C to +70°C (–40°F to +158°F) |
|
Operating humidity |
10% RH to 95% RH, non-condensing |
|
Storage humidity |
5% RH to 95% RH, non-condensing |
· Dust protection requirements
Table 4 Dust concentration limits in the equipment room
|
Substance |
Particle diameter |
Concentration limit |
|
Dust particles |
≥ 0.5 µm |
≤ 1.8 × 107 particles/m3 |
· Corrosive gas protection requirements
Table 5 Corrosive gas concentration limits in the equipment room
|
Gas |
Average concentration (mg/m3) |
Maximum concentration (mg/m3) |
|
SO2 |
0.3 |
1.0 |
|
H2S |
0.1 |
0.5 |
|
Cl2 |
0.1 |
0.3 |
|
HCI |
0.1 |
0.5 |
|
HF |
0.01 |
0.03 |
|
NH3 |
1.0 |
3.0 |
|
O3 |
0.05 |
0.1 |
|
NOX |
0.5 |
1.0 |
