Login
- Released At: 12-12-2022
- Page Views:
- Downloads:
- Related Documents
-
|
|
|
H3C CR16000-F Router Series |
|
10G Ethernet Optical Interface Module Datasheet |
|
|
|
|
Copyright © 2015 to 2022 New H3C Technologies Co., Ltd. All rights reserved.
No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of New H3C Technologies Co., Ltd.
Except for the trademarks of New H3C Technologies Co., Ltd., any trademarks that may be mentioned in this document are the property of their respective owners.
The information in this document is subject to change without notice.
Contents
Overview
The following 10G Ethernet optical interface modules are available for the CR16000-F routers.
Table 1 10G Ethernet optical interface modules available for the CR16000-F routers
|
Module model |
Description |
|
CSPC-GP24GE8XP2L-E |
24-port 1000BASE-X Ethernet optical interface (SFP, LC) + 8-port 1000BASE-X Ethernet combo interface + 2-port 10GBASE-R/W Ethernet optical interface line processing unit (SFP+, LC) (E Type) |
|
CSPC-GE16XP4L-E |
16-port 1000BASE-X Ethernet combo interface + 4-port 10GBASE-R/W Ethernet optical interface line processing unit (SFP+,LC) (E Type) |
|
CSPC-GP44XP4LCX |
44-port 1000BASE-X Ethernet optical interface module (SFP, LC) + 4-port 10GBASE Ethernet optical interface module (SFP+, LC) (C Type) |
|
CSPC-XP24LAX |
24-port 10GBASE Ethernet optical interface module (SFP+, LC) (A Type) |
|
CSPC-XP24LCX |
24-port 10GBASE Ethernet optical interface module (SFP+, LC) (C Type) |
|
CSPC-XP12LAX |
12-port 10GBASE Ethernet optical interface module (SFP+, LC) (A Type). |
|
CSPC-XP12LCX |
12-port 10GBASE Ethernet optical interface module (SFP+, LC) (C Type) |
|
CSPC-XP2LA1 |
2-port 10GBASE Ethernet optical interface module (XFP, LC) (A Type) |
|
CSPC-XP4LB |
4-port enhanced 10GBASE Ethernet optical interface module (XFP, LC) (B Type) |
|
CSPC-XP8LB |
8-port enhanced 10GBASE Ethernet optical interface module (SFP+, LC) (B Type) |
|
CSPC-GP24XP2LB |
16-port 1000BASE-X optical interface (SFP, LC) + 8-port combo interface + 2-port 10GE optical interface module (XFP, LC) (B Type) |
|
|
NOTE: For compatibility between 10G Ethernet optical interface modules and switching fabric modules, see "Appendix B FRUs and compatibility matrixes" in H3C CR16000-F Routers Installation Guide. |
Key features
High performance and scalability
With high-speed CPUs, the interface modules greatly improve the service processing capability and provide independent OAM engine for link status monitoring.
You can select optical interface modules with different number of ports and select optical transceiver modules depending on actual applications and transmission distances.
Environment-friendly design
The interface modules are compliant with the Restriction of Hazardous Substances (RoHS) standard.
Hot swapping
The interface modules are hot swappable. Installing and removing such a module on an operating router does not affect ongoing services on other modules. The management system monitors the module in real time and implements automated configuration for the module to ensure service continuity.
Specifications
The figures in this section are for illustration only.
CSPC-GP24GE8XP2L-E
Figure 1 CSPC-GP24GE8XP2L-E
Front panel
Figure 2 CSPC-GP24GE8XP2L-E front panel
|
(1) 10GBASE-R-SFP+ fiber ports (2 in total, support for 10GE SFP+ transceiver modules) |
|
|
(2) 1000BASE-X-SFP fiber ports (24 in total, support for GE SFP transceiver modules) |
|
|
(3) Combo interfaces (8 in total, the 1000BASE-X-SFP fiber ports support GE SFP transceiver modules) |
|
|
(4) RJ-45 Ethernet port status LED (see Table 2) |
(5) SFP port status LED (see Table 3) |
|
(6) SFP+ port status LED (see Table 4) |
|
Technical specifications
|
Item |
Specifications |
|
Dimensions (H × W × D) |
40 × 399 × 352 mm (1.57 × 15.71 × 13.86 in) |
|
Power consumption |
101 W to 145 W |
|
Ports |
· 24 × 1000BASE-X-SFP fiber ports · 8 × combo interfaces · 2 × 10GBASE-R/W-SFP+ fiber ports |
|
Connector type |
· LC · RJ-45 |
|
Port speed |
· 1000BASE-X-SFP fiber port: ¡ 100 Mbps ¡ 1000 Mbps · 1000BASE-T-RJ45 copper port: 10/100/1000 Mbps (half/full duplex) · 10GBASE-R/W-SFP+ fiber port: 10 Gbps |
|
Net weight |
4.45 kg (9.81 lb) |
|
Applicable system software versions |
7907 or later |
CSPC-GE16XP4L-E
Figure 3 CSPC-GE16XP4L-E
Front panel
Figure 4 CSPC-GE16XP4L-E front panel
|
(1) 10GBASE-R-SFP+ fiber ports (4 in total, support for 10GE SFP+ transceiver modules) |
|
|
(2) Combo interfaces (16 in total, the 1000BASE-X-SFP fiber ports support GE SFP transceiver modules) |
|
|
(3) SFP port status LED (see Table 3) |
(4) RJ-45 Ethernet port status LED (see Table 2) |
|
(5) SFP+ port status LED (see Table 4) |
|
Technical specifications
|
Item |
Specifications |
|
Dimensions (H × W × D) |
40 × 399 × 352 mm (1.57 × 15.71 × 13.86 in) |
|
Power consumption |
107 W to 145 W |
|
Ports |
· 16 × combo interfaces · 4 × 10GBASE-R/W-SFP+ fiber ports |
|
Connector type |
· LC · RJ-45 |
|
Port speed |
· 1000BASE-T-RJ45 copper port: 10/100/1000 Mbps (half/full duplex) · 1000BASE-X-SFP fiber port: ¡ 100 Mbps ¡ 1000 Mbps · 10GBASE-R/W-SFP+ fiber port: 10 Gbps |
|
Net weight |
4.35 kg (9.59 lb) |
|
Applicable system software versions |
7907 or later |
CSPC-GP24XP2LB
Figure 5 CSPC-GP24XP2LB
Front panel
Figure 6 CSPC-GP24XP2LB front panel
|
(1) 1000BASE-X-SFP fiber ports (16 in total) |
(2) Combo interfaces (8 in total) |
|
(3) 10GBASE-R-XFP fiber ports (2 in total) |
(4) SFP port status LED (see Table 3) |
|
(5) RJ-45 Ethernet port status LED (see Table 2) |
(6) XFP port status LED (see Table 5) |
|
|
NOTE: · A combo interface is a logical interface that contains an SFP fiber port and a 1000BASE-T RJ-45 copper port. Only one port can be activated at a time. You can activate the SFP fiber port or the RJ-45 copper port at the CLI. By default, the RJ-45 copper port is activated. · Use a category 5 or above twisted pair cable to connect a 1000BASE-T RJ-45 copper port. The maximum transmission distance is 100 m (328.08 ft). |
Technical specifications
|
Item |
Specifications |
|
Dimensions (H × W × D) |
40 × 399 × 352 mm (1.57 × 15.71 × 13.86 in) |
|
Power consumption |
51 W to 100 W |
|
Ports |
· 16 × 1000BASE-X-SFP fiber ports · 8 × combo interfaces · 2 × 10GBASE-R-XFP fiber ports |
|
Connector type |
· LC · RJ-45 |
|
Port speed |
· 1000BASE-X-SFP fiber port: ¡ 100 Mbps ¡ 1000 Mbps ¡ 10/100/1000 Mbps · 10/100/1000BASE-T copper port: 10/100/1000 Mbps (half/full duplex) · 10GBASE-R-XFP fiber port: 10 Gbps |
|
Net weight |
3.08 kg (6.79 lb) |
|
Applicable system software versions |
7121 or later |
CSPC-GP44XP4LCX
Figure 7 CSPC-GP44XP4LCX
Front panel
Figure 8 CSPC-GP44XP4LCX front panel
|
(1) 1000BASE-X-SFP fiber ports (44 in total) |
(2) 10GBASE-R-SFP+ fiber ports (4 in total) |
|
(3) SFP port status LED (see Table 3) |
(4) SFP+ port status LED (see Table 4) |
Technical specifications
|
Item |
Specifications |
|
Dimensions (H × W × D) |
40 × 399 × 352 mm (1.57 × 15.71 × 13.86 in) |
|
Power consumption |
118 W to 142 W |
|
Ports |
· 44 × 1000BASE-X-SFP fiber ports · 4 × 10GBASE-R-SFP+ fiber ports |
|
Connector type |
LC |
|
Port speed |
· 1000BASE-X-SFP fiber port: 1000 Mbps · 10GBASE-R-SFP+ fiber port: 10 Gbps |
|
Net weight |
3.6 kg (7.94 lb) |
|
Applicable system software versions |
7133 or later |
CSPC-XP2LA1
Figure 9 CSPC-XP2LA1
Front panel
Figure 10 CSPC-XP2LA1 front panel
|
(1) 10GBASE-R-XFP fiber ports (2 in total) |
(2) XFP port status LED (see Table 5) |
Technical specifications
|
Item |
Specifications |
|
Dimensions (H × W × D) |
40 × 399 × 352 mm (1.57 ×15.7 × 13.86 in) |
|
Power consumption |
43 W to 55 W |
|
Ports |
2 |
|
Connector type |
LC |
|
Port speed |
10 Gbps |
|
Net weight |
2.93 kg (6.46 lb) |
|
Applicable system software versions |
7121 or later |
CSPC-XP4LB
Figure 11 CSPC-XP4LB
Front panel
Figure 12 CSPC-XP4LB front panel
|
(1) 10GBASE-R-XFP fiber ports (2 in total) |
(2) XFP port status LED (see Table 5) |
Technical specifications
|
Item |
Specifications |
|
Dimensions (H × W × D) |
40 × 399 ×352 mm (1.57 ×15.7 × 13.86 in) |
|
Power consumption |
53 W to 80 W |
|
Ports |
4 |
|
Connector type |
LC |
|
Port speed |
10 Gbps |
|
Net weight |
2.93 kg (6.46 lb) |
|
Applicable system software versions |
7121 or later |
CSPC-XP8LB
Figure 13 CSPC-XP8LB
Front panel
Figure 14 CSPC-XP8LB front panel
|
(1) 10GBASE-R-SFP+ fiber ports (8 in total) |
(2) SFP+ port status LED (see Table 4) |
Technical specifications
|
Item |
Specifications |
|
Dimensions (H × W × D) |
40 × 399 × 352 mm (1.57 × 15.71 × 13.86 in) |
|
Power consumption |
117 W to 170 W |
|
Ports |
8 |
|
Connector type |
LC |
|
Port speed |
10 Gbps |
|
Net weight |
3.44 kg (7.58 lb) |
|
Applicable system software versions |
7121 or later |
CSPC-XP12LAX/CSPC-XP12LCX
The CSPC-XP12LAX and CSPC-XP12LCX have the same appearance except for their marks. This section uses the CSPC-XP12LCX as an example.
Figure 15 CSPC-XP12LCX
Front panel
Figure 16 CSPC-XP12LCX front panel
|
(1) 10GBASE-R-SFP+ fiber ports (12 in total) |
(2) SFP+ port status LED (see Table 4) |
Technical specifications
|
Item |
Specifications |
|
Dimensions (H × W × D) |
40 × 399 × 352 mm (1.57 × 15.71 × 13.86 in) |
|
Power consumption |
· CSPC-XP12LAX: 107 W to 130 W · CSPC-XP12LCX: 122 W to 173 W |
|
Ports |
12 |
|
Connector type |
LC |
|
Port speed |
10 Gbps |
|
Net weight |
3.65 kg (8.05 lb) |
|
Applicable system software versions |
7133 or later |
CSPC-XP24LAX/CSPC-XP24LCX
The CSPC-XP24LAX and CSPC-XP24LCX cards have the same appearance except for their marks. This section uses the CSPC-XP24LCX as an example.
Figure 17 CSPC-XP24LCX
Front panel
Figure 18 CSPC-XP24LCX front panel
|
(1) 10GBASE-R-SFP+ fiber ports (24 in total) |
(2) SFP+ port status LED (see Table 4) |
Technical specifications
|
Item |
Specifications |
|
Dimensions (H × W × D) |
40 × 399 × 352 mm (1.57 × 15.71 × 13.86 in) |
|
Power consumption |
· CSPC-XP24LAX: 153 W to 209 W · CSPC-XP24LCX: 178 W to 294 W |
|
Ports |
24 |
|
Connector type |
LC |
|
Port speed |
10 Gbps |
|
Net weight |
4.15 kg (9.15 lb) |
|
Applicable system software versions |
7133 or later |
LEDs
Table 2 RJ-45 Ethernet port status LED description
|
Status |
Description |
|
Flashing |
The port is receiving or transmitting data. |
|
On |
A link is present. |
|
Off |
No link is present. |
Table 3 SFP port status LED description
|
Status |
Description |
|
Flashing |
The port is receiving or transmitting data. |
|
On |
A link is present. |
|
Off |
No link is present. |
Table 4 SFP+ port status LED description
|
Status |
Description |
|
Flashing |
The port is receiving or transmitting data. |
|
On |
A link is present. |
|
Off |
No link is present. |
Table 5 XFP port status LED description
|
LINK LED status |
ACT LED status |
Description |
|
Steady on |
Flashing |
The port is receiving or transmitting data. |
|
Steady on |
Off |
A link is present. |
|
Off |
Off |
No link is present. |
Table 6 QSFP+ port status LED description
|
Status |
Description |
|
Flashing |
The port is receiving or transmitting data. |
|
On |
A link is present. |
|
Off |
No link is present. |
Environment requirements
Make sure the ambient environment meets the following requirements:
· Temperature and humidity requirements
Table 7 Temperature and humidity requirements
|
Item |
Specifications |
|
Operating temperature |
0°C to 45°C (32°F to 113°F) |
|
Storage temperature |
–40°C to +70°C (–40°F to +158°F) |
|
Operating humidity |
10% RH to 95% RH, non-condensing |
|
Storage humidity |
5% RH to 95% RH, non-condensing |
· Dust protection requirements
Table 8 Dust concentration limits in the equipment room
|
Substance |
Particle diameter |
Concentration limit |
|
Dust particles |
≥ 0.5 µm |
≤ 1.8 × 107 particles/m3 |
· Corrosive gas protection requirements
Table 9 Corrosive gas concentration limits in the equipment room
|
Gas |
Average concentration (mg/m3) |
Maximum concentration (mg/m3) |
|
SO2 |
0.3 |
1.0 |
|
H2S |
0.1 |
0.5 |
|
Cl2 |
0.1 |
0.3 |
|
HCI |
0.1 |
0.5 |
|
HF |
0.01 |
0.03 |
|
NH3 |
1.0 |
3.0 |
|
O3 |
0.05 |
0.1 |
|
NOX |
0.5 |
1.0 |
