- Released At: 29-07-2022
- Page Views:
- Downloads:
- Table of Contents
- Related Documents
-
1 Product overview
H3C Aps(anchor ac mode) include the WA6600 series, WA6500 series, WA6300 series, WA922 series and WA923 series.
Table1-1 H3C AP models
Hardware series |
Model |
WA6600 series |
WA6638 WA6638i WA6636 WA6630X WA6628 WA6628X WA6622 WA6620 WA6620X WA6620X-LI WA6620XE-LI |
WA6500 series |
WA6528i |
WA6300 series |
WA6338 WA6338-HI WA6338-LI WA6330 WA6330-LI WA6322 WA6322H WA6322H-LI WA6320 WA6320-C WA6320-D WA6320-SI WA6320S-C WA6320S-E WA6320H WA6320H-LI WA6320H-XEPON |
WAP922 series |
WAP922 WAP922E WAP922H WAP922X |
WAP923 series |
WAP923 |
2 About the H3C Access Points Anchor AC Mode command references
The H3C Access Points Anchor AC Mode command references describe the commands and command syntax options for the H3C APs(anchor ac mode).
Command reference |
Content |
Fundamentals Command Reference |
Covers the commands for logging in to and setting up the device. This command reference includes: · CLI (CLI overview and advanced CLI configuration) · RBAC · Login management (CLI login and user configuration and management) · FTP and TFTP · File system management · Configuration file management · Software upgrade · Tcl |
System Management Command Reference |
Covers the commands for managing the device and logs by using device management, information center, and NTP features. This command reference includes: · Device management · NTP · Information center |
Interface Command Reference |
Covers the commands for configuring Ethernet interfaces, loopback interfaces, null interfaces, inloopback interfaces, and bulk interface settings. This command reference includes: · Loopback, null, and inloopback interface · Ethernet interface · Bulk interface configuration |
Network Connectivity Command Reference |
Covers the commands for configuring network connectivity-related Layer 2 and Layer 3 features. This command reference includes: · MAC address table · Ethernet link aggregation · Port isolation · VLAN · Loop detection · Spanning tree · LLDP · Layer 2 forwarding · ARP · IP addressing · DHCP · DHCPv6 · DNS · NAT · IP performance optimization · IPv6 basics · Basic IP routing · Static routing · IPv6 static routing · IGMP snooping · MLD snooping |
WLAN Access Command Reference |
Covers the commands for configuring WLAN access. This command reference includes: WLAN access |
AP Management Command Reference |
Describes how to configure APs. This command reference includes: · Anchor AP · AP management |
WLAN Security Command Reference |
Covers the commands for configuring WLAN security and WIPS features. This command reference includes: · WLAN security · WIPS |
Radio Resources Management Command Reference |
Covers the commands for managing radio channel, power, rate, and load balancing. This command reference includes: · Radio management · WLAN radio load balancing · WLAN load balancing · WLAN radio resource measurement · Band navigation · WLAN RRM · Channel scanning · Spectrum management |
WLAN Roaming Command Reference |
Covers the commands for configuring WLAN roaming. This command reference includes: · WLAN roaming |
WLAN Traffic Optimization Command Reference |
Covers the commands for optimizing WLAN traffic by using multicast optimization and user isolation. This command reference includes: · WLAN multicast optimization · User isolation |
WLAN Advanced Features Command Reference |
Covers the commands for WLAN advanced features. This command reference includes: · WLAN optimization · Bonjour gateway · WLAN Mesh · WLAN high availability |
User Access and Authentication Command Reference |
Covers the commands for configuring wired and wireless access and authentication. This command reference includes: · WLAN authentication · WLAN IP snooping · AAA · 802.1X · MAC authentication · Port security · Portal |
Security Command Reference |
Covers the commands for configuring identity authentication (PKI), secure management (password control, public key management, IPsec, and SSH), and security protection (IP source guard and ARP attack protection). This command reference includes: · ACL · Time range · User profile · Public key management · PKI · IPsec · SSH · Attack detection and prevention · ARP attack protection · ND attack protection · Crypto engine · Password Control |
QoS Command Reference |
Covers the commands for configuring wired and wireless QoS. This command reference includes: · QoS · WLAN QoS |
Network Management and Monitoring Command Reference |
Covers the commands that help you manage networks, display system information, control network traffic, sample packets, analyze network performance, and debug network connectivity. This command reference includes: · System maintenance and debugging · CWMP · NQA · SNMP · NETCONF · Process monitoring and maintenance · Packet Capture |
Internet of Things Command Reference |
Covers the commands for configuring and managing IoT Aps and IoT modules. This command reference includes: IoT AP |
Index |
Covers all the commands supported by the device. |