00-About the H3C Access Points Anchor AC Mode Configuration Guides

HomeSupportConfigure & DeployConfiguration GuidesH3C Access Points Anchor AC Mode Configuration Guides(E2453 R2453)-6W10000-About the H3C Access Points Anchor AC Mode Configuration Guides
Download Book

1 Product overview

H3C Aps(anchor ac mode) include the WA6600 series, WA6500 series, WA6300 series, WA922 series and  WA923 series.

Table1-1 H3C AP models

Hardware series

Model

WA6600 series

WA6638

WA6638i

WA6636

WA6630X

WA6628

WA6628X

WA6622

WA6620

WA6620X

WA6620X-LI

WA6620XE-LI

WA6500 series

WA6528i

WA6300 series

WA6338

WA6338-HI

WA6338-LI

WA6330

WA6330-LI

WA6322

WA6322H

WA6322H-LI

WA6320

WA6320-C

WA6320-D

WA6320-SI

WA6320S-C

WA6320S-E

WA6320H

WA6320H-LI

WA6320H-XEPON

WAP922 series

WAP922

WAP922E

WAP922H

WAP922X

WAP923 series

WAP923


2 About the H3C Access Points Anchor AC Mode configuration guides

The H3C Access Points Anchor AC Mode configuration guides describe the software features for H3C APs(anchor ac mode). These guides also guide you through the software configuration procedures and provide configuration examples to help you apply the software features to different network scenarios.

 

Configuration guide

Content

Fundamentals Configuration Guide

Describes how to log in to and set up the device. This guide includes:

·     CLI (CLI overview and advanced CLI configuration)

·     RBAC

·     Login management (CLI login and user configuration and management)

·     FTP and TFTP

·     File system management

·     Configuration file management

·     Software upgrade

·     Tcl

System Management Configuration Guide

Describes how to manage the device and logs by using device management, information center, and NTP features. This guide includes:

·     Device management

·     NTP

·     Information center

Interface Configuration Guide

Describes how to configure Ethernet interfaces, loopback interfaces, null interfaces, inloopback interfaces, and bulk interface settings. This guide includes:

·     Loopback, null, and inloopback interface

·     Ethernet interface

·     Bulk interface configuration

Network Connectivity Configuration Guide

Describes how to configure network connectivity-related Layer 2 and Layer 3 features. This guide includes:

·     About the network connectivity configuration guide

·     MAC address table

·     Ethernet link aggregation

·     Port isolation

·     VLAN

·     Loop detection

·     Spanning tree

·     LLDP

·     Layer 2 forwarding

·     ARP

·     IP addressing

·     DHCP

·     DHCPv6

·     DNS

·     NAT

·     IP performance optimization

·     IPv6 basics

·     Basic IP routing

·     Static routing

·     IPv6 static routing

·     Multicast overview

·     IGMP snooping

·     MLD snooping

WLAN Access Configuration Guide

Describes how to configure WLAN access. This guide includes:

WLAN access

AP Configuration Guide

Describes how to configure APs. This guide includes:

·     Anchor AP

·     AP management

WLAN Security Configuration Guide

Describes how to configure WLAN security and WIPS features. This guide includes:

·     WLAN security

·     WIPS

Radio Resources Management Configuration Guide

Describes how to manage radio channel, power, rate, and load balancing. This guide includes:

·     Radio management

·     WLAN radio load balancing

·     WLAN load balancing

·     WLAN radio resource measurement

·     Band navigation

·     WLAN RRM

·     Channel scanning

·     Spectrum management

WLAN Roaming Configuration Guide

Describes how to establish and configure WLAN roaming. This guide includes:

WLAN roaming

WLAN Traffic Optimization Configuration Guide

Describes how to optimize WLAN traffic by using multicast optimization and user isolation. This guide includes:

·     WLAN multicast optimization

·     User isolation

WLAN Advanced Features Configuration Guide

Describes how to configure WLAN advanced features. This guide includes:

·     WLAN optimization

·     Bonjour gateway

·     WLAN Mesh

·     WLAN high availability

User Access and Authentication Configuration Guide

Describes how to configure wired and wireless access and authentication. This guide includes:

·     WLAN authentication

·     WLAN IP snooping

·     AAA

·     802.1X

·     MAC authentication

·     Port security

·     Portal

Security Configuration Guide

Describes how to configure identity authentication (PKI), secure management (public key management, IPsec, and SSH), and security protection (IP source guard and ARP attack protection). This guide includes:

·     ACL

·     Time range

·     User profile

·     Public key management

·     PKI

·     IPsec

·     SSH

·     Attack detection and prevention

·     ARP attack protection

·     ND attack protection

·     Crypto engine

·     Password Control

QoS Configuration Guide

Describes how to configure wired and wireless QoS. This guide includes:

·     QoS

·     WLAN QoS

Network Management and Monitoring Configuration Guide

Describes how to manage networks, display system information, control network traffic, sample packets, analyze network performance, and debug network connectivity. This guide includes:

·     System maintenance and debugging

·     CWMP

·     NQA

·     SNMP

·     NETCONF

·     Process monitoring and maintenance

·     Packet Capture

Internet of Things Configuration Guide

Describes how to configure and manage IoT Aps and IoT modules . This guide includes:

IoT AP

Acronyms

Lists the significant acronyms in the configuration guides.

 

  • Cloud & AI
  • InterConnect
  • Intelligent Computing
  • Security
  • SMB Products
  • Intelligent Terminal Products
  • Product Support Services
  • Technical Service Solutions
All Services
  • Resource Center
  • Policy
  • Online Help
All Support
  • Become a Partner
  • Partner Resources
  • Partner Business Management
All Partners
  • Profile
  • News & Events
  • Online Exhibition Center
  • Contact Us
All About Us
新华三官网