00-About the H3C Access Points Anchor AC Mode Command References

HomeSupportResource CenterH3C Access Points Anchor AC Mode Command References(E2442 R2442)-6W10000-About the H3C Access Points Anchor AC Mode Command References

Product overview

H3C Aps(anchor ac mode) include the WA6600 series and the WA6300 series.

Table 1 H3C AP models

Hardware series

Model

WA6600 series

WA6638

WA6638i

WA6636

WA6630X

WA6628

WA6628X

WA6622

WA6620

WA6620X

WA6300 series

WA6338

WA6338-HI

WA6338-LI

WA6330

WA6330-LI

WA6322


About the H3C Access Points Anchor AC Mode command references

The H3C Access Points Anchor AC Mode command references describe the commands and command syntax options for the H3C APs(anchor ac mode).

 

Command reference

Content

Fundamentals Command Reference

Covers the commands for logging in to and setting up the device. This command reference includes:

·     CLI (CLI overview and advanced CLI configuration)

·     RBAC

·     Login management (CLI login and user configuration and management)

·     FTP and TFTP

·     File system management

·     Configuration file management

·     Software upgrade

System Management Command Reference

Covers the commands for managing the device and logs by using device management, information center, and NTP features. This command reference includes:

·     Device management

·     Information center

·     NTP

Interface Command Reference

Covers the commands for configuring Ethernet interfaces, loopback interfaces, null interfaces, inloopback interfaces, and bulk interface settings. This command reference includes:

·     Bulk interface configuration

·     Ethernet interface

·     Loopback, null, and inloopback interface

Network Connectivity Command Reference

Covers the commands for configuring network connectivity-related Layer 2 and Layer 3 features. This command reference includes:

·     MAC address table

·     Ethernet link aggregation

·     Port isolation

·     VLAN

·     Loop detection

·     Spanning tree

·     LLDP

·     Layer 2 forwarding

·     ARP

·     IP addressing

·     DHCP

·     DHCPv6

·     DNS

·     IP performance optimization

·     IPv6 basics

·     Basic IP routing

·     Static routing

·     IPv6 static routing

·     IGMP snooping

·     MLD snooping

WLAN Access Command Reference

Covers the commands for configuring WLAN access. This command reference includes:

WLAN access

AP Management Command Reference

Describes how to configure APs. This command reference includes:

·     Anchor AP

·     AP management

WLAN Security Command Reference

Covers the commands for configuring WLAN security and WIPS features. This command reference includes:

·     WLAN security

·     WIPS

Radio Resources Management Command Reference

Covers the commands for managing radio channel, power, rate, and load balancing. This command reference includes:

·     Radio management

·     WLAN radio load balancing

·     WLAN load balancing

·     WLAN radio resource measurement

·     Band navigation

·     WLAN RRM

·     Channel scanning

·     Spectrum management

WLAN Roaming Command Reference

Covers the commands for configuring WLAN roaming. This command reference includes:

·     WLAN roaming

·     802.11r

WLAN Traffic Optimization Command Reference

Covers the commands for optimizing WLAN traffic by using multicast optimization and user isolation. This command reference includes:

·     WLAN multicast optimization

·     User isolation

WLAN Advanced Features Command Reference

Covers the commands for WLAN advanced features. This command reference includes:

·     WLAN optimization

·     Bonjour gateway

User Access and Authentication Command Reference

Covers the commands for configuring wired and wireless access and authentication. This command reference includes:

·     WLAN authentication

·     WLAN IP snooping

·     AAA

·     802.1X

·     MAC authentication

·     Port security

·     Portal

Security Command Reference

Covers the commands for configuring identity authentication (PKI), secure management (password control, public key management, IPsec, and SSH), and security protection (IP source guard and ARP attack protection). This command reference includes:

·     ACL

·     Time range

·     User profile

·     Public key management

·     PKI

·     IPsec

·     SSH

·     Attack detection and prevention

·     ARP attack protection

·     ND attack protection

·     Crypto engine

QoS Command Reference

Covers the commands for configuring wired and wireless QoS. This command reference includes:

·     WLAN QoS

·     QoS

Network Management and Monitoring Command Reference

Covers the commands that help you manage networks, display system information, control network traffic, sample packets, analyze network performance, and debug network connectivity. This command reference includes:

·     System maintenance and debugging

·     CWMP

·     NQA

·     SNMP

·     NETCONF

·     Process monitoring and maintenance

Index

Covers all the commands supported by the device.