H3C S6850 & S9850 Switch Series System Log Messages Reference-Release 655x-6W100

HomeSupportResource CenterH3C S6850 & S9850 Switch Series System Log Messages Reference-Release 655x-6W100

 

H3C S6850 & S9850 Switch Series

System Log Messages Reference

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Document version: 6W100-20190510

 

H3C_彩色.emf

 


Contents

Introduction· 1

System log message format 1

Managing and obtaining system log messages· 3

Obtaining log messages from the console terminal 3

Obtaining log messages from the log buffer 4

Obtaining log messages from a monitor terminal 4

Obtaining log messages from the log file· 4

Obtaining log messages from a log host 4

Software module list 4

Using this document 8

AAA messages· 9

AAA_FAILURE· 10

AAA_LAUNCH· 10

AAA_SUCCESS· 11

ACL messages· 11

ACL_ACCELERATE_NO_RES· 11

ACL_ACCELERATE_NONCONTIGUOUSMASK· 12

ACL_ACCELERATE_NOT_SUPPORT· 12

ACL_ACCELERATE_NOT_SUPPORTHOPBYHOP· 12

ACL_ACCELERATE_NOT_SUPPORTMULTITCPFLAG·· 13

ACL_ACCELERATE_UNK_ERR· 13

ACL_IPV6_STATIS_INFO·· 13

ACL_NO_MEM·· 14

ACL_STATIS_INFO·· 14

ANCP messages· 14

ANCP_INVALID_PACKET· 15

APMGR messages· 15

APMGR_AC_MEM_ALERT· 15

APMGR_ADD_AP_FAIL· 16

APMGR_ADDBAC_INFO·· 16

APMGR_AP_OFFLINE· 16

APMGR_AP_ONLINE· 17

APMGR_CWC_IMG_DOWNLOAD_COMPLETE· 17

APMGR_CWC_IMG_DOWNLOAD_START· 17

APMGR_CWC_IMG_NO_ENOUGH_SPACE· 18

APMGR_CWC_LOCAL_AC_DOWN· 18

APMGR_CWC_LOCAL_AC_UP· 19

APMGR_CWC_REBOOT· 19

APMGR_CWC_RUN_DOWNLOAD_COMPLETE· 19

APMGR_CWC_RUN_DOWNLOAD_START· 20

APMGR_CWC_RUN_NO_ENOUGH_SPACE· 20

APMGR_CWC_TUNNEL_DOWN· 21

APMGR_CWC_TUNNEL_UP· 21

APMGR_CWS_IMG_DOWNLOAD_COMPLETE· 22

APMGR_CWS_IMG_DOWNLOAD_START· 22

APMGR_CWS_LOCAL_AC_DOWN· 23

APMGR_CWS_LOCAL_AC_UP· 23

APMGR_CWS_RUN_DOWNLOAD_COMPLETE· 24

APMGR_CWS_RUN_DOWNLOAD_START· 24

APMGR_CWS_TUNNEL_DOWN· 25

APMGR_CWS_TUNNEL_UP· 25

APMGR_DELBAC_INFO·· 26

APMGR_LOCAL_AC_OFFLINE· 26

APMGR_LOCAL_AC_ONLINE· 26

ARP messages· 26

ARP_ACTIVE_ACK_NO_REPLY· 27

ARP_ACTIVE_ACK_NOREQUESTED_REPLY· 27

ARP_BINDRULETOHW_FAILED·· 28

ARP_DETECTION_LOG·· 29

ARP_DUPLICATE_IPADDR_DETECT· 29

ARP_DYNAMIC· 30

ARP_DYNAMIC_IF· 30

ARP_DYNAMIC_SLOT· 31

ARP_ENTRY_CONFLICT· 32

ARP_HOST_IP_CONFLICT· 32

ARP_LOCALPROXY_ENABLE_FAILED·· 33

ARP_RATE_EXCEEDED·· 33

ARP_RATELIMIT_NOTSUPPORT· 34

ARP_SENDER_IP_INVALID·· 34

ARP_SENDER_MAC_INVALID·· 35

ARP_SENDER_SMACCONFLICT· 35

ARP_SENDER_SMACCONFLICT_VSI 36

ARP_SRC_MAC_FOUND_ATTACK· 36

ARP_SUP_ENABLE_FAILED·· 37

ARP_TARGET_IP_INVALID·· 37

ARP_THRESHOLD_REACHED·· 37

ARP_USER_DUPLICATE_IPADDR_DETECT· 38

ARP_USER_MOVE_DETECT· 39

DUPIFIP· 39

DUPIP· 40

DUPVRRPIP· 40

ATK messages· 40

ATK_ICMP_ADDRMASK_REQ·· 41

ATK_ICMP_ADDRMASK_REQ_RAW·· 42

ATK_ICMP_ADDRMASK_REQ_RAW_SZ· 43

ATK_ICMP_ADDRMASK_REQ_SZ· 44

ATK_ICMP_ADDRMASK_RPL· 45

ATK_ICMP_ADDRMASK_RPL_RAW·· 46

ATK_ICMP_ADDRMASK_RPL_RAW_SZ· 47

ATK_ICMP_ADDRMASK_RPL_SZ· 48

ATK_ICMP_ECHO_REQ·· 49

ATK_ICMP_ECHO_REQ_RAW·· 50

ATK_ICMP_ECHO_REQ_RAW_SZ· 51

ATK_ICMP_ECHO_REQ_SZ· 52

ATK_ICMP_ECHO_RPL· 53

ATK_ICMP_ECHO_RPL_RAW·· 54

ATK_ICMP_ECHO_RPL_RAW_SZ· 55

ATK_ICMP_ECHO_RPL_SZ· 56

ATK_ICMP_FLOOD·· 57

ATK_ICMP_FLOOD_SZ· 57

ATK_ICMP_INFO_REQ·· 58

ATK_ICMP_INFO_REQ_RAW·· 59

ATK_ICMP_INFO_REQ_RAW_SZ· 60

ATK_ICMP_INFO_REQ_SZ· 61

ATK_ICMP_INFO_RPL· 62

ATK_ICMP_INFO_RPL_RAW·· 63

ATK_ICMP_INFO_RPL_RAW_SZ· 64

ATK_ICMP_INFO_RPL_SZ· 65

ATK_ICMP_LARGE· 66

ATK_ICMP_LARGE_RAW·· 67

ATK_ICMP_LARGE_RAW_SZ· 67

ATK_ICMP_LARGE_SZ· 68

ATK_ICMP_PARAPROBLEM·· 69

ATK_ICMP_PARAPROBLEM_RAW·· 70

ATK_ICMP_PARAPROBLEM_RAW_SZ· 71

ATK_ICMP_PARAPROBLEM_SZ· 72

ATK_ICMP_PINGOFDEATH· 73

ATK_ICMP_PINGOFDEATH_RAW·· 74

ATK_ICMP_PINGOFDEATH_RAW_SZ· 74

ATK_ICMP_PINGOFDEATH_SZ· 75

ATK_ICMP_REDIRECT· 76

ATK_ICMP_REDIRECT_RAW·· 77

ATK_ICMP_REDIRECT_RAW_SZ· 78

ATK_ICMP_REDIRECT_SZ· 79

ATK_ICMP_SMURF· 80

ATK_ICMP_SMURF_RAW·· 81

ATK_ICMP_SMURF_RAW_SZ· 82

ATK_ICMP_SMURF_SZ· 83

ATK_ICMP_SOURCEQUENCH· 84

ATK_ICMP_SOURCEQUENCH_RAW·· 85

ATK_ICMP_SOURCEQUENCH_RAW_SZ· 86

ATK_ICMP_SOURCEQUENCH_SZ· 87

ATK_ICMP_TIMEEXCEED·· 88

ATK_ICMP_TIMEEXCEED_RAW·· 89

ATK_ICMP_TIMEEXCEED_RAW_SZ· 90

ATK_ICMP_TIMEEXCEED_SZ· 91

ATK_ICMP_TRACEROUTE· 92

ATK_ICMP_TRACEROUTE_RAW·· 93

ATK_ICMP_TRACEROUTE_RAW_SZ· 93

ATK_ICMP_TRACEROUTE_SZ· 94

ATK_ICMP_TSTAMP_REQ·· 95

ATK_ICMP_TSTAMP_REQ_RAW·· 96

ATK_ICMP_TSTAMP_REQ_RAW_SZ· 97

ATK_ICMP_TSTAMP_REQ_SZ· 98

ATK_ICMP_TSTAMP_RPL· 99

ATK_ICMP_TSTAMP_RPL_RAW·· 100

ATK_ICMP_TSTAMP_RPL_RAW_SZ· 101

ATK_ICMP_TSTAMP_RPL_SZ· 102

ATK_ICMP_TYPE· 103

ATK_ICMP_TYPE_RAW·· 104

ATK_ICMP_TYPE_RAW_SZ· 105

ATK_ICMP_TYPE_SZ· 106

ATK_ICMP_UNREACHABLE· 107

ATK_ICMP_UNREACHABLE_RAW·· 108

ATK_ICMP_UNREACHABLE_RAW_SZ· 109

ATK_ICMP_UNREACHABLE_SZ· 110

ATK_ICMPV6_DEST_UNREACH· 111

ATK_ICMPV6_DEST_UNREACH_RAW·· 112

ATK_ICMPV6_DEST_UNREACH_RAW_SZ· 112

ATK_ICMPV6_DEST_UNREACH_SZ· 113

ATK_ICMPV6_ECHO_REQ·· 114

ATK_ICMPV6_ECHO_REQ_RAW·· 115

ATK_ICMPV6_ECHO_REQ_RAW_SZ· 115

ATK_ICMPV6_ECHO_REQ_SZ· 116

ATK_ICMPV6_ECHO_RPL· 117

ATK_ICMPV6_ECHO_RPL_RAW·· 118

ATK_ICMPV6_ECHO_RPL_RAW_SZ· 118

ATK_ICMPV6_ECHO_RPL_SZ· 119

ATK_ICMPV6_FLOOD·· 120

ATK_ICMPV6_FLOOD_SZ· 120

ATK_ICMPV6_GROUPQUERY· 121

ATK_ICMPV6_GROUPQUERY_RAW·· 122

ATK_ICMPV6_GROUPQUERY_RAW_SZ· 122

ATK_ICMPV6_GROUPQUERY_SZ· 123

ATK_ICMPV6_GROUPREDUCTION· 124

ATK_ICMPV6_GROUPREDUCTION_RAW·· 125

ATK_ICMPV6_GROUPREDUCTION_RAW_SZ· 125

ATK_ICMPV6_GROUPREDUCTION_SZ· 126

ATK_ICMPV6_GROUPREPORT· 127

ATK_ICMPV6_GROUPREPORT_RAW·· 128

ATK_ICMPV6_GROUPREPORT_RAW_SZ· 128

ATK_ICMPV6_GROUPREPORT_SZ· 129

ATK_ICMPV6_LARGE· 130

ATK_ICMPV6_LARGE_RAW·· 130

ATK_ICMPV6_LARGE_RAW_SZ· 131

ATK_ICMPV6_LARGE_SZ· 131

ATK_ICMPV6_PACKETTOOBIG·· 132

ATK_ICMPV6_PACKETTOOBIG_RAW·· 133

ATK_ICMPV6_PACKETTOOBIG_RAW_SZ· 133

ATK_ICMPV6_PACKETTOOBIG_SZ· 134

ATK_ICMPV6_PARAPROBLEM·· 135

ATK_ICMPV6_PARAPROBLEM_RAW·· 136

ATK_ICMPV6_PARAPROBLEM_RAW_SZ· 136

ATK_ICMPV6_PARAPROBLEM_SZ· 137

ATK_ICMPV6_TIMEEXCEED·· 138

ATK_ICMPV6_TIMEEXCEED_RAW·· 139

ATK_ICMPV6_TIMEEXCEED_RAW_SZ· 139

ATK_ICMPV6_TIMEEXCEED_SZ· 140

ATK_ICMPV6_TRACEROUTE· 141

ATK_ICMPV6_TRACEROUTE_RAW·· 142

ATK_ICMPV6_TRACEROUTE_RAW_SZ· 143

ATK_ICMPV6_TRACEROUTE_SZ· 144

ATK_ICMPV6_TYPE· 145

ATK_ICMPV6_TYPE _RAW_SZ· 146

ATK_ICMPV6_TYPE_RAW·· 146

ATK_ICMPV6_TYPE_SZ· 147

ATK_IP_OPTION· 148

ATK_IP_OPTION_RAW·· 149

ATK_IP_OPTION_RAW_SZ· 150

ATK_IP_OPTION_SZ· 151

ATK_IP4_ACK_FLOOD·· 152

ATK_IP4_ACK_FLOOD_SZ· 152

ATK_IP4_DIS_PORTSCAN· 153

ATK_IP4_DIS_PORTSCAN_SZ· 153

ATK_IP4_DNS_FLOOD·· 154

ATK_IP4_DNS_FLOOD_SZ· 154

ATK_IP4_FIN_FLOOD·· 155

ATK_IP4_FIN_FLOOD_SZ· 155

ATK_IP4_FRAGMENT· 156

ATK_IP4_FRAGMENT_RAW·· 157

ATK_IP4_FRAGMENT_RAW_SZ· 158

ATK_IP4_FRAGMENT_SZ· 159

ATK_IP4_HTTP_FLOOD·· 160

ATK_IP4_HTTP_FLOOD_SZ· 160

ATK_IP4_IMPOSSIBLE· 161

ATK_IP4_IMPOSSIBLE_RAW·· 162

ATK_IP4_IMPOSSIBLE_RAW_SZ· 163

ATK_IP4_IMPOSSIBLE_SZ· 164

ATK_IP4_IPSWEEP· 165

ATK_IP4_IPSWEEP_SZ· 165

ATK_IP4_PORTSCAN· 166

ATK_IP4_PORTSCAN_SZ· 166

ATK_IP4_RST_FLOOD·· 167

ATK_IP4_RST_FLOOD_SZ· 167

ATK_IP4_SYN_FLOOD·· 168

ATK_IP4_SYN_FLOOD_SZ· 168

ATK_IP4_SYNACK_FLOOD·· 169

ATK_IP4_SYNACK_FLOOD_SZ· 169

ATK_IP4_TCP_ALLFLAGS· 170

ATK_IP4_TCP_ALLFLAGS_RAW·· 171

ATK_IP4_TCP_ALLFLAGS_RAW_SZ· 171

ATK_IP4_TCP_ALLFLAGS_SZ· 172

ATK_IP4_TCP_FINONLY· 173

ATK_IP4_TCP_FINONLY_RAW·· 174

ATK_IP4_TCP_FINONLY_RAW_SZ· 174

ATK_IP4_TCP_FINONLY_SZ· 175

ATK_IP4_TCP_INVALIDFLAGS· 176

ATK_IP4_TCP_INVALIDFLAGS_RAW·· 177

ATK_IP4_TCP_INVALIDFLAGS_RAW_SZ· 178

ATK_IP4_TCP_INVALIDFLAGS_SZ· 179

ATK_IP4_TCP_LAND·· 180

ATK_IP4_TCP_LAND_RAW·· 181

ATK_IP4_TCP_LAND_RAW_SZ· 181

ATK_IP4_TCP_LAND_SZ· 182

ATK_IP4_TCP_NULLFLAG·· 183

ATK_IP4_TCP_NULLFLAG_RAW·· 184

ATK_IP4_TCP_NULLFLAG_RAW_SZ· 184

ATK_IP4_TCP_NULLFLAG_SZ· 185

ATK_IP4_TCP_SYNFIN· 186

ATK_IP4_TCP_SYNFIN_RAW·· 187

ATK_IP4_TCP_SYNFIN_RAW_SZ· 187

ATK_IP4_TCP_SYNFIN_SZ· 188

ATK_IP4_TCP_WINNUKE· 189

ATK_IP4_TCP_WINNUKE_RAW·· 190

ATK_IP4_TCP_WINNUKE_RAW_SZ· 190

ATK_IP4_TCP_WINNUKE_SZ· 191

ATK_IP4_TEARDROP· 192

ATK_IP4_TEARDROP_RAW·· 193

ATK_IP4_TEARDROP_RAW_SZ· 194

ATK_IP4_TEARDROP_SZ· 195

ATK_IP4_TINY_FRAGMENT· 196

ATK_IP4_TINY_FRAGMENT_RAW·· 197

ATK_IP4_TINY_FRAGMENT_RAW_SZ· 198

ATK_IP4_TINY_FRAGMENT_SZ· 199

ATK_IP4_UDP_BOMB· 200

ATK_IP4_UDP_BOMB_RAW·· 201

ATK_IP4_UDP_BOMB_RAW_SZ· 202

ATK_IP4_UDP_BOMB_SZ· 203

ATK_IP4_UDP_FLOOD·· 204

ATK_IP4_UDP_FLOOD_SZ· 204

ATK_IP4_UDP_FRAGGLE· 205

ATK_IP4_UDP_FRAGGLE_RAW·· 206

ATK_IP4_UDP_FRAGGLE_RAW_SZ· 206

ATK_IP4_UDP_FRAGGLE_SZ· 207

ATK_IP4_UDP_SNORK· 208

ATK_IP4_UDP_SNORK_RAW·· 209

ATK_IP4_UDP_SNORK_RAW_SZ· 209

ATK_IP4_UDP_SNORK_SZ· 210

ATK_IP6_ACK_FLOOD·· 211

ATK_IP6_ACK_FLOOD_SZ· 211

ATK_IP6_DIS_PORTSCAN· 212

ATK_IP6_DIS_PORTSCAN_SZ· 212

ATK_IP6_DNS_FLOOD·· 213

ATK_IP6_DNS_FLOOD_SZ· 213

ATK_IP6_FIN_FLOOD·· 214

ATK_IP6_FIN_FLOOD_SZ· 214

ATK_IP6_FRAGMENT· 215

ATK_IP6_FRAGMENT_RAW·· 216

ATK_IP6_FRAGMENT_RAW_SZ· 216

ATK_IP6_FRAGMENT_SZ· 217

ATK_IP6_HTTP_FLOOD·· 218

ATK_IP6_HTTP_FLOOD_SZ· 218

ATK_IP6_IMPOSSIBLE· 219

ATK_IP6_IMPOSSIBLE_RAW·· 220

ATK_IP6_IMPOSSIBLE_RAW_SZ· 220

ATK_IP6_IMPOSSIBLE_SZ· 221

ATK_IP6_IPSWEEP· 221

ATK_IP6_IPSWEEP_SZ· 222

ATK_IP6_PORTSCAN· 222

ATK_IP6_PORTSCAN_SZ· 223

ATK_IP6_RST_FLOOD·· 223

ATK_IP6_RST_FLOOD_SZ· 224

ATK_IP6_SYN_FLOOD·· 224

ATK_IP6_SYN_FLOOD_SZ· 225

ATK_IP6_SYNACK_FLOOD·· 225

ATK_IP6_SYNACK_FLOOD_SZ· 226

ATK_IP6_TCP_ALLFLAGS· 226

ATK_IP6_TCP_ALLFLAGS_RAW·· 227

ATK_IP6_TCP_ALLFLAGS_RAW_SZ· 227

ATK_IP6_TCP_ALLFLAGS_SZ· 228

ATK_IP6_TCP_FINONLY· 229

ATK_IP6_TCP_FINONLY_RAW·· 229

ATK_IP6_TCP_FINONLY_RAW_SZ· 230

ATK_IP6_TCP_FINONLY_SZ· 230

ATK_IP6_TCP_INVALIDFLAGS· 231

ATK_IP6_TCP_INVALIDFLAGS_RAW·· 232

ATK_IP6_TCP_INVALIDFLAGS_RAW_SZ· 233

ATK_IP6_TCP_INVALIDFLAGS_SZ· 234

ATK_IP6_TCP_LAND·· 235

ATK_IP6_TCP_LAND_RAW·· 235

ATK_IP6_TCP_LAND_RAW_SZ· 236

ATK_IP6_TCP_LAND_SZ· 236

ATK_IP6_TCP_NULLFLAG·· 237

ATK_IP6_TCP_NULLFLAG_RAW·· 237

ATK_IP6_TCP_NULLFLAG_RAW_SZ· 238

ATK_IP6_TCP_NULLFLAG_SZ· 238

ATK_IP6_TCP_SYNFIN· 239

ATK_IP6_TCP_SYNFIN_RAW·· 239

ATK_IP6_TCP_SYNFIN_RAW_SZ· 240

ATK_IP6_TCP_SYNFIN_SZ· 240

ATK_IP6_TCP_WINNUKE· 241

ATK_IP6_TCP_WINNUKE_RAW·· 241

ATK_IP6_TCP_WINNUKE_RAW_SZ· 242

ATK_IP6_TCP_WINNUKE_SZ· 242

ATK_IP6_UDP_FLOOD·· 243

ATK_IP6_UDP_FLOOD_SZ· 243

ATK_IP6_UDP_FRAGGLE· 244

ATK_IP6_UDP_FRAGGLE_RAW·· 244

ATK_IP6_UDP_FRAGGLE_RAW_SZ· 245

ATK_IP6_UDP_FRAGGLE_SZ· 245

ATK_IP6_UDP_SNORK· 246

ATK_IP6_UDP_SNORK_RAW·· 246

ATK_IP6_UDP_SNORK_RAW_SZ· 247

ATK_IP6_UDP_SNORK_SZ· 247

ATK_IPOPT_ABNORMAL· 248

ATK_IPOPT_ABNORMAL_RAW·· 249

ATK_IPOPT_ABNORMAL_RAW_SZ· 250

ATK_IPOPT_ABNORMAL_SZ· 251

ATK_IPOPT_LOOSESRCROUTE· 252

ATK_IPOPT_LOOSESRCROUTE_RAW·· 253

ATK_IPOPT_LOOSESRCROUTE_RAW_SZ· 254

ATK_IPOPT_LOOSESRCROUTE_SZ· 255

ATK_IPOPT_RECORDROUTE· 256

ATK_IPOPT_RECORDROUTE_RAW·· 257

ATK_IPOPT_RECORDROUTE_RAW_SZ· 258

ATK_IPOPT_RECORDROUTE_SZ· 259

ATK_IPOPT_ROUTEALERT· 260

ATK_IPOPT_ROUTEALERT_RAW·· 261

ATK_IPOPT_ROUTEALERT_RAW_SZ· 262

ATK_IPOPT_ROUTEALERT_SZ· 263

ATK_IPOPT_SECURITY· 264

ATK_IPOPT_SECURITY_RAW·· 265

ATK_IPOPT_SECURITY_RAW_SZ· 266

ATK_IPOPT_SECURITY_SZ· 267

ATK_IPOPT_STREAMID·· 268

ATK_IPOPT_STREAMID_RAW·· 269

ATK_IPOPT_STREAMID_RAW_SZ· 270

ATK_IPOPT_STREAMID_SZ· 271

ATK_IPOPT_STRICTSRCROUTE· 272

ATK_IPOPT_STRICTSRCROUTE_RAW·· 273

ATK_IPOPT_STRICTSRCROUTE_RAW_SZ· 274

ATK_IPOPT_STRICTSRCROUTE_SZ· 275

ATK_IPOPT_TIMESTAMP· 276

ATK_IPOPT_TIMESTAMP_RAW·· 277

ATK_IPOPT_TIMESTAMP_RAW_SZ· 278

ATK_IPOPT_TIMESTAMP_SZ· 279

ATK_IPV6_EXT_HEADER· 280

ATK_IPV6_EXT_HEADER_RAW·· 281

ATK_IPV6_EXT_HEADER_RAW_SZ· 281

ATK_IPV6_EXT_HEADER_SZ· 282

ATM·· 282

ATM_PVCDOWN· 282

ATM_PVCUP· 283

BFD messages· 283

BFD_CHANGE_FSM·· 284

BFD_REACHED_UPPER_LIMIT· 284

BGP messages· 284

BGP_EXCEED_ROUTE_LIMIT· 285

BGP_REACHED_THRESHOLD·· 285

BGP_LOG_ROUTE_FLAP· 286

BGP_MEM_ALERT· 286

BGP_PEER_LICENSE_REACHED·· 286

BGP_ROUTE_LICENSE_REACHED·· 287

BGP_STATE_CHANGED·· 287

BLS messages· 287

BLS_ENTRY_ADD·· 288

BLS_ENTRY_DEL· 288

BLS_IPV6_ENTRY_ADD·· 289

BLS_IPV6_ENTRY_DEL· 289

CFD messages· 289

CFD_CROSS_CCM·· 290

CFD_ERROR_CCM·· 290

CFD_LOST_CCM·· 291

CFD_RECEIVE_CCM·· 291

CFGMAN messages· 292

CFGMAN_ARCHIVE_SCP_FAIL· 292

CFGMAN_CFGCHANGED·· 292

CFGMAN_EXIT_FROM_CONFIGURE· 293

CFGMAN_OPTCOMPLETION· 293

CONNLMT messages· 294

CONNLMT_IPV4_OVERLOAD·· 295

CONNLMT_IPV4_RECOVER· 296

CONNLMT_IPV6_OVERLOAD·· 297

CONNLMT_IPV6_RECOVER· 298

DEV messages· 298

BOARD_INSERTED·· 299

BOARD_REBOOT· 299

BOARD_REMOVED·· 299

BOARD_STATE_FAULT· 300

BOARD_STATE_NORMAL· 300

BOARD_STATE_STARTING·· 300

CFCARD_INSERTED·· 301

CFCARD_REMOVED·· 301

CHASSIS_REBOOT· 301

DEV_CLOCK_CHANGE· 302

DEV_FAULT_TOOLONG·· 302

DYINGGASP· 302

FAN_ABSENT· 303

FAN_DIRECTION_NOT_PREFERRED·· 303

FAN_FAILED·· 304

FAN_RECOVERED·· 304

MAD_DETECT· 305

POWER_ABSENT· 305

POWER_FAILED·· 306

POWER_MONITOR_ABSENT· 306

POWER_MONITOR_FAILED·· 307

POWER_MONITOR_RECOVERED·· 307

POWER_RECOVERED·· 308

RPS_ABSENT· 308

RPS_FAILED·· 309

RPS_NORMAL· 309

SUBCARD_FAULT· 310

SUBCARD_INSERTED·· 310

SUBCARD_REBOOT· 310

SUBCARD_REMOVED·· 311

SYSTEM_REBOOT· 311

TEMPERATURE_ALARM·· 312

TEMPERATURE_LOW·· 313

TEMPERATURE_NORMAL· 314

TEMPERATURE_SHUTDOWN· 315

TEMPERATURE_WARNING·· 316

VCHK_VERSION_INCOMPATIBLE· 316

DHCP· 317

DHCP_NOTSUPPORTED·· 317

DHCP_NORESOURCES· 317

DHCPR·· 317

DHCPR_SERVERCHANGE· 318

DHCPR_SWITCHMASTER· 318

DHCPS messages· 318

DHCPS_ALLOCATE_IP· 319

DHCPS_CONFLICT_IP· 319

DHCPS_EXTEND_IP· 320

DHCPS_FILE· 320

DHCPS_RECLAIM_IP· 321

DHCPS_VERIFY_CLASS· 321

DHCPS6 messages· 321

DHCPS6_ALLOCATE_ADDRESS· 322

DHCPS6_ALLOCATE_PREFIX· 322

DHCPS6_CONFLICT_ADDRESS· 323

DHCPS6_EXTEND_ADDRESS· 323

DHCPS6_EXTEND_PREFIX· 324

DHCPS6_FILE· 324

DHCPS6_RECLAIM_ADDRESS· 325

DHCPS6_RECLAIM_PREFIX· 325

DHCPSP4· 325

DHCPSP4_FILE· 326

DHCPSP6· 326

DHCPSP6_FILE· 326

DIAG messages· 326

CPU_MINOR_RECOVERY· 327

CPU_MINOR_THRESHOLD·· 327

CPU_SEVERE_RECOVERY· 327

CPU_SEVERE_THRESHOLD·· 328

MEM_ALERT· 329

MEM_BELOW_THRESHOLD·· 330

MEM_EXCEED_THRESHOLD·· 331

DLDP messages· 331

DLDP_AUTHENTICATION_FAILED·· 331

DLDP_LINK_BIDIRECTIONAL· 332

DLDP_LINK_SHUTMODECHG·· 332

DLDP_LINK_UNIDIRECTIONAL· 333

DLDP_NEIGHBOR_AGED·· 333

DLDP_NEIGHBOR_CONFIRMED·· 334

DLDP_NEIGHBOR_DELETED·· 334

DOT1X messages· 334

DOT1X_CONFIG_NOTSUPPORT· 335

DOT1X_LOGIN_FAILURE· 335

DOT1X_LOGIN_SUCC· 336

DOT1X_LOGIN_SUCC (in open mode) 336

DOT1X_LOGOFF· 337

DOT1X_LOGOFF (in open mode) 337

DOT1X_LOGOFF_ABNORMAL· 338

DOT1X_LOGOFF_ABNORMAL (in open mode) 338

DOT1X_MACBINDING_EXIST· 339

DOT1X_NOTENOUGH_EADFREEIP_RES· 339

DOT1X_NOTENOUGH_EADFREERULE_RES· 340

DOT1X_NOTENOUGH_EADMACREDIR_RES· 340

DOT1X_NOTENOUGH_EADPORTREDIR_RES· 340

DOT1X_NOTENOUGH_ENABLEDOT1X_RES· 341

DOT1X_PEXAGG_NOMEMBER_RES· 341

DOT1X_SMARTON_FAILURE· 341

DOT1X_UNICAST_NOT_EFFECTIVE· 342

DRNI 342

DRNI_AUTO-RECOVERY_TIMEOUT· 342

DRNI_GLBCHECK_CONSISTENCY· 342

DRNI_GLBCHECK_INCONSISTENCY· 343

DRNI_IFCHECK_CONSISTENCY· 343

DRNI_IFCHECK_INCONSISTENCY· 343

DRNI_IFEVENT_DR_BIND·· 344

DRNI_IFEVENT_DR_GLOBALDOWN· 344

DRNI_IFEVENT_DR_GLOBALUP· 344

DRNI_IFEVENT_DR_NOSELECTED·· 345

DRNI_IFEVENT_DR_PEER_NOSELECTED·· 345

DRNI_IFEVENT_DR_PEER_SELECTED·· 345

DRNI_IFEVENT_DR_SELECTED·· 346

DRNI_IFEVENT_DR_UNBIND·· 346

DRNI_IFEVENT_IPP_BIND·· 346

DRNI_IFEVENT_IPP_DOWN· 347

DRNI_IFEVENT_IPP_UNBIND·· 347

DRNI_IFEVENT_IPP_UP· 347

DRNI_IPP_BLOCK· 348

DRNI_IPP_UNBLOCK· 348

DRNI_KEEPALIVEINTERVAL_MISMATCH· 348

DRNI_KEEPALIVELINK_DOWN· 349

DRNI_KEEPALIVELINK_UP· 349

DRNI_SECONDARY_MADDOWN· 349

DRNI_SYSEVENT_DEVICEROLE_CHANGE· 350

DRNI_SYSEVENT_MAC_CHANGE· 350

DRNI_SYSEVENT_NUMBER_CHANGE· 350

DRNI_SYSEVENT_PRIORITY_CHANGE· 351

DRVPLAT· 351

Dev_FAILTURE· 351

EDEV messages· 353

ALARM_IN_REMOVED·· 353

ALARM_IN_REPORTED·· 353

EDEV_BOOTROM_UPDATE_FAILED·· 354

EDEV_BOOTROM_UPDATE_SUCCESS· 354

EDEV_FAILOVER_GROUP_STATE_CHANGE· 354

ERPS messages· 355

ERPS_STATE_CHANGED·· 355

ETH messages· 355

ETH_SET_MAC_FAILED·· 355

ETHOAM messages· 355

ETHOAM_CONNECTION_FAIL_DOWN· 356

ETHOAM_CONNECTION_FAIL_TIMEOUT· 356

ETHOAM_CONNECTION_FAIL_UNSATISF· 356

ETHOAM_CONNECTION_SUCCEED·· 357

ETHOAM_DISABLE· 357

ETHOAM_DISCOVERY_EXIT· 357

ETHOAM_ENABLE· 358

ETHOAM_ENTER_LOOPBACK_CTRLLED·· 358

ETHOAM_ENTER_LOOPBACK_CTRLLING·· 358

ETHOAM_LOCAL_DYING_GASP· 359

ETHOAM_LOCAL_ERROR_FRAME· 359

ETHOAM_LOCAL_ERROR_FRAME_PERIOD·· 359

ETHOAM_LOCAL_ERROR_FRAME_SECOND·· 360

ETHOAM_LOCAL_ERROR_SYMBOL· 360

ETHOAM_LOCAL_LINK_FAULT· 360

ETHOAM_LOOPBACK_EXIT· 361

ETHOAM_LOOPBACK_EXIT_ERROR_STATU· 361

ETHOAM_LOOPBACK_NO_RESOURCE· 361

ETHOAM_LOOPBACK_NOT_SUPPORT· 362

ETHOAM_QUIT_LOOPBACK_CTRLLED·· 362

ETHOAM_QUIT_LOOPBACK_CTRLLING·· 362

ETHOAM_REMOTE_CRITICAL· 363

ETHOAM_REMOTE_DYING_GASP· 363

ETHOAM_REMOTE_ERROR_FRAME· 363

ETHOAM_REMOTE_ERROR_FRAME_PERIOD·· 364

ETHOAM_REMOTE_ERROR_FRAME_SECOND·· 364

ETHOAM_REMOTE_ERROR_SYMBOL· 364

ETHOAM_REMOTE_EXIT· 365

ETHOAM_REMOTE_FAILURE_RECOVER· 365

ETHOAM_REMOTE_LINK_FAULT· 365

ETHOAM_NO_ENOUGH_RESOURCE· 366

ETHOAM_NOT_CONNECTION_TIMEOUT· 366

EVB messages· 366

EVB_AGG_FAILED·· 367

EVB_LICENSE_EXPIRE· 367

EVB_VSI_OFFLINE· 367

EVB_VSI_ONLINE· 368

EVIISIS messages· 368

EVIISIS_LICENSE_EXPIRED·· 368

EVIISIS_LICENSE_EXPIRED_TIME· 368

EVIISIS_LICENSE_UNAVAILABLE· 369

EVIISIS_NBR_CHG·· 369

FCLINK messages· 369

FCLINK_FDISC_REJECT_NORESOURCE· 370

FCLINK_FLOGI_REJECT_NORESOURCE· 370

FCOE messages· 370

FCOE_INTERFACE_NOTSUPPORT_FCOE· 371

FCOE_LAGG_BIND_ACTIVE· 371

FCOE_LAGG_BIND_DEACTIVE· 372

FCZONE messages· 372

FCZONE_DISTRIBUTE_FAILED·· 373

FCZONE_HARDZONE_DISABLED·· 373

FCZONE_HARDZONE_ENABLED·· 374

FCZONE_ISOLATE_ALLNEIGHBOR· 374

FCZONE_ISOLATE_CLEAR_VSAN· 375

FCZONE_ISOLATE_CLEAR_ALLVSAN· 375

FCZONE_ISOLATE_NEIGHBOR· 375

FIB messages· 376

FIB_FILE· 376

FILTER messages· 376

FILTER_EXECUTION_ICMP· 377

FILTER_EXECUTION_ICMPV6· 378

FILTER_IPV4_EXECUTION· 379

FILTER_IPV6_EXECUTION· 380

FIPSNG messages· 380

FIPSNG_HARD_RESOURCE_NOENOUGH· 380

FIPSNG_HARD_RESOURCE_RESTORE· 381

FS messages· 381

FS_UNFORMATTED_PARTITION· 381

FTPD messages· 381

FTP_ACL_DENY· 382

FTPD_REACH_SESSION_LIMIT· 382

FTPD_AUTHOR_FAILED·· 382

gRPC messages· 383

GRPC_LOGIN· 383

GRPC_LOGIN_FAILED·· 383

GRPC_LOGOUT· 384

GRPC_SERVER_FAILED·· 384

GRPC_SUBSCRIBE_EVENT_FAILED·· 384

GRPC_RECEIVE_SUBSCRIPTION· 385

HA messages· 385

HA_BATCHBACKUP_FINISHED·· 385

HA_BATCHBACKUP_STARTED·· 385

HA_STANDBY_NOT_READY· 386

HA_STANDBY_TO_MASTER· 386

HQOS messages· 386

HQOS_DP_SET_FAIL· 386

HQOS_FP_SET_FAIL· 387

HQOS_POLICY_APPLY_FAIL· 387

HQOS_POLICY_APPLY_FAIL· 388

HTTPD messages· 388

HTTPD_CONNECT· 388

HTTPD_CONNECT_TIMEOUT· 389

HTTPD_DISCONNECT· 389

HTTPD_FAIL_FOR_ACL· 389

HTTPD_FAIL_FOR_ACP· 390

HTTPD_REACH_CONNECT_LIMIT· 390

IFNET messages· 390

IF_BUFFER_CONGESTION_OCCURRENCE· 391

IF_BUFFER_CONGESTION_CLEAR· 391

IF_JUMBOFRAME_WARN· 392

INTERFACE_NOTSUPPRESSED·· 392

INTERFACE_SUPPRESSED·· 392

LINK_UPDOWN· 393

PHY_UPDOWN· 393

PROTOCOL_UPDOWN· 393

TUNNEL_LINK_UPDOWN· 394

TUNNEL_PHY_UPDOWN· 394

VLAN_MODE_CHANGE· 394

IKE messages· 395

IKE_P1_SA_ESTABLISH_FAIL· 395

IKE_P2_SA_ESTABLISH_FAIL· 396

IKE_P2_SA_TERMINATE· 396

IKE_VERIFY_CERT_FAIL· 397

IP6ADDR·· 398

IP6ADDR_CREATEADDRESS_ERROR· 398

IP6ADDR_FUNCTION_FAIL· 399

IPADDR messages· 399

IPADDR_HA_EVENT_ERROR· 400

IPADDR_HA_STOP_EVENT· 401

IPFW·· 401

IPFW_FAILURE· 401

IPSEC messages· 401

IPSEC_FAILED_ADD_FLOW_TABLE· 402

IPSEC_PACKET_DISCARDED·· 402

IPSEC_SA_ESTABLISH· 403

IPSEC_SA_ESTABLISH_FAIL· 403

IPSEC_SA_INITINATION· 404

IPSEC_SA_TERMINATE· 404

IPSG messages· 404

IPSG_ADDENTRY_ERROR· 405

IPSG_DELENTRY_ERROR· 406

IPSG_ADDEXCLUDEDVLAN_ERROR· 407

IPSG_DELEXCLUDEDVLAN_ERROR· 408

IRDP messages· 408

IRDP_EXCEED_ADVADDR_LIMIT· 408

IRF· 409

IRF_LINK_BLOCK· 409

IRF_LINK_DOWN· 409

IRF_LINK_UP· 409

IRF_MEMBERID_CONFLICT· 410

IRF_MERGE· 410

IRF_MERGE_NEED_REBOOT· 410

IRF_MERGE_NOT_NEED_REBOOT· 411

ISIS messages· 411

ISIS_LSP_CONFLICT· 411

ISIS_MEM_ALERT· 412

ISIS_NBR_CHG·· 412

ISSU messages· 412

ISSU_LOAD_FAILED·· 413

ISSU_LOAD_SUCCESS· 413

ISSU_PROCESSWITCHOVER· 413

ISSU_ROLLBACKCHECKNORMAL· 414

L2PT messages· 414

L2PT_SET_MULTIMAC_FAILED·· 414

L2PT_CREATE_TUNNELGROUP_FAILED·· 414

L2PT_ADD_GROUPMEMBER_FAILED·· 415

L2PT_ENABLE_DROP_FAILED·· 415

L2TPv2 messages· 415

L2TPV2_TUNNEL_EXCEED_LIMIT· 416

L2TPV2_SESSION_EXCEED_LIMIT· 416

L2VPN messages· 416

L2VPN_BGPVC_CONFLICT_LOCAL· 417

L2VPN_BGPVC_CONFLICT_REMOTE· 417

L2VPN_HARD_RESOURCE_NOENOUGH· 417

L2VPN_HARD_RESOURCE_RESTORE· 418

L2VPN_LABEL_DUPLICATE· 418

LAGG messages· 418

LAGG_ACTIVE· 419

LAGG_AUTO_AGGREGATION· 419

LAGG_INACTIVE_AICFG·· 420

LAGG_INACTIVE_BFD·· 420

LAGG_INACTIVE_CONFIGURATION· 421

LAGG_INACTIVE_DUPLEX· 421

LAGG_INACTIVE_HARDWAREVALUE· 422

LAGG_INACTIVE_LOWER_LIMIT· 422

LAGG_INACTIVE_PARTNER· 423

LAGG_INACTIVE_PHYSTATE· 423

LAGG_INACTIVE_RESOURCE_INSUFICIE· 424

LAGG_INACTIVE_SPEED·· 424

LAGG_INACTIVE_UPPER_LIMIT· 425

LAGG_SELECTPORT_INCONSISTENT· 425

LDP messages· 425

LDP_MPLSLSRID_CHG·· 426

LDP_SESSION_CHG·· 427

LDP_SESSION_GR· 428

LDP_SESSION_SP· 428

LLDP messages· 429

LLDP_CREATE_NEIGHBOR· 429

LLDP_DELETE_NEIGHBOR· 430

LLDP_LESS_THAN_NEIGHBOR_LIMIT· 430

LLDP_NEIGHBOR_AGE_OUT· 431

LLDP_NEIGHBOR_PROTECTION_BLOCK· 431

LLDP_NEIGHBOR_PROTECTION_DOWN· 432

LLDP_NEIGHBOR_PROTECTION_UNBLOCK· 432

LLDP_NEIGHBOR_PROTECTION_UP· 432

LLDP_PVID_INCONSISTENT· 433

LLDP_REACH_NEIGHBOR_LIMIT· 433

LOAD messages· 433

BOARD_LOADING·· 434

LOAD_FAILED·· 434

LOAD_FINISHED·· 434

LOGIN messages· 435

LOGIN_FAILED·· 435

LOGIN_ INVALID_USERNAME_PWD·· 435

LPDT messages· 435

LPDT_LOOPED·· 436

LPDT_RECOVERED·· 436

LPDT_VLAN_LOOPED·· 436

LPDT_VLAN_RECOVERED·· 437

LS messages· 437

LS_ADD_USER_TO_GROUP· 437

LS_AUTHEN_FAILURE· 438

LS_AUTHEN_SUCCESS· 438

LS_DEL_USER_FROM_GROUP· 439

LS_DELETE_PASSWORD_FAIL· 439

LS_PWD_ADDBLACKLIST· 439

LS_PWD_CHGPWD_FOR_AGEDOUT· 440

LS_PWD_CHGPWD_FOR_AGEOUT· 440

LS_PWD_CHGPWD_FOR_COMPOSITION· 440

LS_PWD_CHGPWD_FOR_FIRSTLOGIN· 441

LS_PWD_CHGPWD_FOR_LENGTH· 441

LS_PWD_FAILED2WRITEPASS2FILE· 441

LS_PWD_MODIFY_FAIL· 442

LS_PWD_MODIFY_SUCCESS· 442

LS_REAUTHEN_FAILURE· 443

LS_UPDATE_PASSWORD_FAIL· 443

LS_USER_CANCEL· 443

LS_USER_PASSWORD_EXPIRE· 444

LS_USER_ROLE_CHANGE· 444

LSPV messages· 444

LSPV_PING_STATIS_INFO·· 445

MAC messages· 445

MAC_DRIVER_ADD_ENTRY· 445

MAC_PROTOCOLPKT_NORES_GLOBAL· 446

MAC_PROTOCOLPKT_NORES_PORT· 446

MAC_PROTOCOLPKT_NORES_VLAN· 447

MAC_TABLE_FULL_GLOBAL· 447

MAC_TABLE_FULL_PORT· 447

MAC_TABLE_FULL_VLAN· 448

MAC_VLAN_LEARNLIMIT_NORESOURCE· 448

MAC_VLAN_LEARNLIMIT_NOTSUPPORT· 448

MACA messages· 448

MACA_ENABLE_NOT_EFFECTIVE· 449

MACA_LOGIN_FAILURE· 449

MACA_LOGIN_SUCC· 450

MACA_LOGIN_SUCC (in open mode) 450

MACA_LOGOFF· 451

MACA_LOGOFF (in open mode) 451

MACSEC messages· 451

MACSEC_MKA_KEEPALIVE_TIMEOUT· 452

MACSEC_MKA_PRINCIPAL_ACTOR· 452

MACSEC_MKA_SAK_REFRESH· 452

MACSEC_MKA_SESSION_REAUTH· 453

MACSEC_MKA_SESSION_SECURED·· 453

MACSEC_MKA_SESSION_START· 454

MACSEC_MKA_SESSION_STOP· 454

MACSEC_MKA_SESSION_UNSECURED·· 455

MBFD messages· 455

MBFD_TRACEROUTE_FAILURE· 455

MBUF messages· 456

MBUF_DATA_BLOCK_CREATE_FAIL· 456

MDC messages· 456

MDC_CREATE_ERR· 457

MDC_CREATE· 457

MDC_DELETE· 457

MDC_KERNEL_EVENT_TOOLONG·· 458

MDC_LICENSE_EXPIRE· 458

MDC_NO_FORMAL_LICENSE· 458

MDC_NO_LICENSE_EXIT· 459

MDC_OFFLINE· 459

MDC_ONLINE· 459

MDC_STATE_CHANGE· 460

MFIB messages· 460

MFIB_MEM_ALERT· 460

MGROUP messages· 460

MGROUP_APPLY_SAMPLER_FAIL· 461

MGROUP_RESTORE_CPUCFG_FAIL· 461

MGROUP_RESTORE_GROUP_FAIL· 462

MGROUP_RESTORE_IFCFG_FAIL· 462

MGROUP_SYNC_CFG_FAIL· 463

MPLS messages· 463

MPLS_HARD_RESOURCE_NOENOUGH· 463

MPLS_HARD_RESOURCE_RESTORE· 463

MTLK messages· 464

MTLK_UPLINK_STATUS_CHANGE· 464

NAT messages· 464

NAT_ADDR_BIND_CONFLICT· 464

NAT_FAILED_ADD_FLOW_RULE· 465

NAT_FAILED_ADD_FLOW_TABLE· 465

NAT_FLOW·· 466

NAT_SERVER_INVALID·· 467

NAT_SERVICE_CARD_RECOVER_FAILURE· 468

ND messages· 468

ND_COMMONPROXY_ENABLE_FAILED·· 469

ND_CONFLICT· 469

ND_DUPADDR· 469

ND_HOST_IP_CONFLICT· 470

ND_LOCALPROXY_ENABLE_FAILED·· 470

ND_MAC_CHECK· 471

ND_NETWORKROUTE_DUPLICATE· 471

ND_RAGUARD_DROP· 472

ND_SET_PORT_TRUST_NORESOURCE· 472

ND_SET_VLAN_REDIRECT_NORESOURCE· 472

ND_USER_DUPLICATE_IPV6ADDR· 473

ND_USER_MOVE· 474

ND_USER_OFFLINE· 474

ND_USER_ONLINE· 475

NETCONF messages· 475

CLI 475

EDIT-CONFIG·· 476

NETCONF_MSG_DEL· 477

THREAD·· 477

NQA messages· 477

NQA_LOG_UNREACHABLE· 477

NTP messages· 478

NTP_CLOCK_CHANGE· 478

NTP_LEAP_CHANGE· 478

NTP_SOURCE_CHANGE· 479

NTP_SOURCE_LOST· 479

NTP_STRATUM_CHANGE· 479

OAP messages· 480

OAP_CLIENT_DEREG·· 480

OAP_CLIENT_TIMEOUT· 480

OBJP messages· 480

OBJP_ACCELERATE_NO_RES· 481

OBJP_ACCELERATE_NOT_SUPPORT· 481

OBJP_ACCELERATE_UNK_ERR· 481

OFP messages· 482

OFP_ACTIVE· 482

OFP_ACTIVE_FAILED·· 482

OFP_CONNECT· 482

OFP_FAIL_OPEN· 483

OFP_FLOW_ADD·· 483

OFP_FLOW_ADD_ARP_FAILED·· 484

OFP_FLOW_ADD_DUP· 484

OFP_FLOW_ADD_FAILED·· 485

OFP_FLOW_ADD_FAILED·· 485

OFP_FLOW_ADD_ND_FAILED·· 486

OFP_FLOW_ADD_TABLE_MISS· 486

OFP_FLOW_ADD_TABLE_MISS_FAILED·· 487

OFP_FLOW_DEL· 487

OFP_FLOW_DEL_L2VPN_DISABLE· 488

OFP_FLOW_DEL_TABLE_MISS· 488

OFP_FLOW_DEL_TABLE_MISS_FAILED·· 489

OFP_FLOW_DEL_VXLAN_DEL· 489

OFP_FLOW_MOD·· 490

OFP_FLOW_MOD_FAILED·· 490

OFP_FLOW_MOD_TABLE_MISS· 491

OFP_FLOW_MOD_TABLE_MISS_FAILED·· 491

OFP_FLOW_RMV_GROUP· 492

OFP_FLOW_RMV_HARDTIME· 492

OFP_FLOW_RMV_IDLETIME· 492

OFP_FLOW_RMV_METER· 493

OFP_FLOW_UPDATE_FAILED·· 493

OFP_GROUP_ADD·· 494

OFP_GROUP_ADD_FAILED·· 494

OFP_GROUP_DEL· 495

OFP_GROUP_MOD·· 495

OFP_GROUP_MOD_FAILED·· 496

OFP_GROUP_REFRESH_FAILED·· 496

OFP_GROUP_ROLLBACK_FAILED·· 496

OFP_METER_ADD·· 497

OFP_METER_ADD_FAILED·· 497

OFP_METER_DEL· 498

OFP_METER_MOD·· 498

OFP_METER_MOD_FAILED·· 499

OFP_MISS_RMV_GROUP· 499

OFP_MISS_RMV_HARDTIME· 499

OFP_MISS_RMV_IDLETIME· 500

OFP_MISS_RMV_METER· 500

OFP_RADARDETECTION· 500

PORT_MOD·· 501

OPENSRC (FreeRADIUS) messages· 502

HUP event 502

Process restart event 503

Process start event 503

User authentication· 504

OPTMOD messages· 506

BIAS_HIGH· 507

BIAS_LOW·· 507

BIAS_NORMAL· 507

CFG_ERR· 508

CHKSUM_ERR· 508

FIBER_SFP MODULE_INVALID·· 508

FIBER_SFPMODULE_NOWINVALID·· 509

IO_ERR· 509

MOD_ALM_OFF· 509

MOD_ALM_ON· 510

MODULE_IN· 510

MODULE_OUT· 510

PHONY_MODULE· 511

RX_ALM_OFF· 511

RX_ALM_ON· 511

RX_POW_HIGH· 512

RX_POW_LOW·· 512

RX_POW_NORMAL· 512

TEMP_HIGH· 513

TEMP_LOW·· 513

TEMP_NORMAL· 513

TX_ALM_OFF· 514

TX_ALM_ON· 514

TX_POW_HIGH· 514

TX_POW_LOW·· 515

TX_POW_NORMAL· 515

TYPE_ERR· 515

VOLT_HIGH· 516

VOLT_LOW·· 516

VOLT_NORMAL· 516

OSPF messages· 517

OSPF_DUP_RTRID_NBR· 517

OSPF_IP_CONFLICT_INTRA· 517

OSPF_LAST_NBR_DOWN· 518

OSPF_MEM_ALERT· 518

OSPF_NBR_CHG·· 519

OSPF_RT_LMT· 519

OSPF_RTRID_CHG·· 519

OSPF_RTRID_CONFLICT_INTER· 520

OSPF_RTRID_CONFLICT_INTRA· 520

OSPF_VLINKID_CHG·· 520

OSPFV3 messages· 521

OSPFV3_LAST_NBR_DOWN· 521

OSPFV3_MEM_ALERT· 521

OSPFV3_NBR_CHG·· 522

OSPFV3_RT_LMT· 522

PBB messages· 522

PBB_JOINAGG_WARNING·· 523

PBR messages· 523

PBR_HARDWARE_ERROR· 523

PCE messages· 523

PCE_PCEP_SESSION_CHG·· 524

PEX messages (IRF 3) 524

PEX_ASSOCIATEID_MISMATCHING·· 525

PEX_CONFIG_ERROR· 525

PEX_CONNECTION_ERROR· 526

PEX_FORBID_STACK· 526

PEX_LINK_BLOCK· 527

PEX_LINK_DOWN· 528

PEX_LINK_FORWARD·· 528

PEX_REG_JOININ· 529

PEX_REG_LEAVE· 529

PEX_REG_REQUEST· 530

PEX_STACKCONNECTION_ERROR· 530

PEX messages (IRF 3.1) 530

PEX_AUTOCONFIG_BAGG_ASSIGNMEMBER· 531

PEX_AUTOCONFIG_BAGG_CREATE· 531

PEX_AUTOCONFIG_BAGG_NORESOURCE· 531

PEX_AUTOCONFIG_BAGG_REMOVEMEMBER· 532

PEX_AUTOCONFIG_CAPABILITY_ENABLE· 532

PEX_AUTOCONFIG_CASCADELIMIT· 532

PEX_AUTOCONFIG_CONNECTION_ERROR· 533

PEX_AUTOCONFIG_DIFFGROUPNUMBER· 533

PEX_AUTOCONFIG_DYNAMICBAGG_STP· 534

PEX_AUTOCONFIG_GROUP_CREATE· 534

PEX_AUTOCONFIG_NONUMBERRESOURCE· 534

PEX_AUTOCONFIG_NOT_CASCADEPORT· 535

PEX_AUTOCONFIG_NUMBER_ASSIGN· 535

PEX_LLDP_DISCOVER· 536

PEX_MEMBERID_EXCEED·· 536

PEX_PECSP_OPEN_RCVD·· 536

PEX_PECSP_OPEN_SEND·· 537

PEX_PECSP_TIMEOUT· 537

PFILTER messages· 537

PFILTER_GLB_IPV4_DACT_NO_RES· 538

PFILTER_GLB_IPV4_DACT_UNK_ERR· 538

PFILTER_GLB_IPV6_DACT_NO_RES· 539

PFILTER_GLB_IPV6_DACT_UNK_ERR· 539

PFILTER_GLB_MAC_DACT_NO_RES· 540

PFILTER_GLB_MAC_DACT_UNK_ERR· 540

PFILTER_GLB_NO_RES· 541

PFILTER_GLB_NOT_SUPPORT· 541

PFILTER_GLB_ RES_CONFLICT· 542

PFILTER_GLB_UNK_ERR· 542

PFILTER_IF_IPV4_DACT_NO_RES· 543

PFILTER_IF_IPV4_DACT_UNK_ERR· 543

PFILTER_IF_IPV6_DACT_NO_RES· 544

PFILTER_IF_IPV6_DACT_UNK_ERR· 544

PFILTER_IF_MAC_DACT_NO_RES· 545

PFILTER_IF_MAC_DACT_UNK_ERR· 545

PFILTER_IF_NO_RES· 546

PFILTER_IF_NOT_SUPPORT· 546

PFILTER_IF_RES_CONFLICT· 547

PFILTER_IF_UNK_ERR· 547

PFILTER_IPV4_FLOW_INFO·· 548

PFILTER_IPV4_FLOW_STATIS· 548

PFILTER_IPV6_FLOW_INFO·· 549

PFILTER_IPV6_FLOW_STATIS· 549

PFILTER_IPV6_STATIS_INFO·· 550

PFILTER_MAC_FLOW_INFO·· 550

PFILTER_STATIS_INFO·· 551

PFILTER_VLAN_IPV4_DACT_NO_RES· 551

PFILTER_VLAN_IPV4_DACT_UNK_ERR· 552

PFILTER_VLAN_IPV6_DACT_NO_RES· 552

PFILTER_VLAN_IPV6_DACT_UNK_ERR· 553

PFILTER_VLAN_MAC_DACT_NO_RES· 553

PFILTER_VLAN_MAC_DACT_UNK_ERR· 554

PFILTER_VLAN_NO_RES· 554

PFILTER_VLAN_NOT_SUPPORT· 555

PFILTER_VLAN_RES_CONFLICT· 555

PFILTER_VLAN_UNK_ERR· 556

PIM messages· 556

PIM_NBR_DOWN· 556

PIM_NBR_UP· 557

PING messages· 557

PING_STATISTICS· 557

PING_VPN_STATISTICS· 558

PKG messages· 558

PKG_BOOTLOADER_FILE_FAILED·· 558

PKG_BOOTLOADER_FILE_SUCCESS· 559

PKG_INSTALL_ACTIVATE_FAILED·· 559

PKG_INSTALL_ACTIVATE_SUCCESS· 559

PKI messages· 559

GET_CERT_FROM_CA_SERVER_FAIL· 560

IMPORT_CERT_FAIL· 561

REQUEST_CERT_FAIL· 562

REQUEST_CERT_SUCCESS· 563

RETRIEVE_CRL_FAIL· 563

VALIDATE_CERT_FAIL· 564

PKT2CPU messages· 565

PKT2CPU_NO_RESOURCE· 566

PKTCPT· 566

PKTCPT_AP_OFFLINE· 566

PKTCPT_AREADY_EXIT· 567

PKTCPT_CONN_FAIL· 567

PKTCPT_INVALID_FILTER· 568

PKTCPT_LOGIN_DENIED·· 568

PKTCPT_MEMORY_ALERT· 568

PKTCPT_OPEN_FAIL· 569

PKTCPT_OPERATION_TIMEOUT· 569

PKTCPT_SERVICE_FAIL· 570

PKTCPT_UNKNOWN_ERROR· 570

PKTCPT_UPLOAD_ERROR· 570

PKTCPT_WRITE_FAIL· 571

Portal messages· 571

PORTAL_RULE_FAILED·· 571

PORTSEC messages· 572

PORTSEC_ACL_FAILURE· 572

PORTSEC_CAR_FAILURE· 572

PORTSEC_CREATEAC_FAILURE· 573

PORTSEC_LEARNED_MACADDR· 573

PORTSEC_NTK_NOT_EFFECTIVE· 574

PORTSEC_PORTMODE_NOT_EFFECTIVE· 574

PORTSEC_PROFILE_FAILURE· 574

PORTSEC_URL_FAILURE· 575

PORTSEC_VIOLATION· 575

PORTSEC_VLANMACLIMIT· 576

PPP messages· 576

IPPOOL_ADDRESS_EXHAUSTED·· 576

PPP_USER_LOGON_SUCCESS· 577

PPP_USER_LOGON_FAILED·· 577

PPP_USER_LOGOFF· 578

PWDCTL messages· 579

ADDBLACKLIST· 579

CHANGEPASSWORD·· 579

FAILEDTOWRITEPWD·· 580

FAILEDTOOPENFILE· 580

NOENOUGHSPACE· 580

QOS messages· 580

MIRROR_SYNC_CFG_FAIL· 581

QOS_CAR_APPLYUSER_FAIL· 581

QOS_CBWFQ_REMOVED·· 582

QOS_GTS_APPLYUSER_FAIL· 582

QOS_LR_APPLYIF_FAIL· 583

QOS_NOT_ENOUGH_BANDWIDTH· 583

QOS_NOT_ENOUGH_NNIBANDWIDTH· 584

QOS_POLICY_APPLYCOPP_CBFAIL· 585

QOS_POLICY_APPLYCOPP_FAIL· 585

QOS_POLICY_APPLYGLOBAL_CBFAIL· 586

QOS_POLICY_APPLYGLOBAL_FAIL· 586

QOS_POLICY_APPLYIF_CBFAIL· 587

QOS_POLICY_APPLYIF_FAIL· 587

QOS_POLICY_APPLYUSER_FAIL· 588

QOS_POLICY_APPLYVLAN_CBFAIL· 588

QOS_POLICY_APPLYVLAN_FAIL· 589

QOS_QMPROFILE_APPLYIF_FAIL· 589

QOS_QMPROFILE_APPLYUSER_FAIL· 590

QOS_QMPROFILE_MODIFYQUEUE_FAIL· 590

QOS_QUEUE_APPLYIF_FAIL· 591

QOS_UNI_RESTORE_FAIL· 591

WRED_TABLE_CFG_FAIL· 591

RADIUS messages· 592

RADIUS_AUTH_FAILURE· 592

RADIUS_AUTH_SUCCESS· 592

RADIUS_DELETE_HOST_FAIL· 592

RDDC messages· 593

RDDC_ACTIVENODE_CHANGE· 593

RESMON·· 593

RESMON_MINOR· 594

RESMON_MINOR_RECOVERY· 594

RESMON_SEVERE· 595

RESMON_SEVERE_RECOVERY· 595

RESMON_USEDUP· 596

RESMON_USEDUP_RECOVERY· 596

RIP messages· 596

RIP_MEM_ALERT· 597

RIP_RT_LMT· 597

RIPNG messages· 597

RIPNG_MEM_ALERT· 597

RIPNG_RT_LMT· 598

RM messages· 598

RM_ACRT_REACH_LIMIT· 598

RM_ACRT_REACH_THRESVALUE· 599

RM_THRESHLD_VALUE_REACH· 599

RM_TOTAL_THRESHLD_VALUE_REACH· 599

RPR messages· 600

RPR_EXCEED_MAX_SEC_MAC· 600

RPR_EXCEED_MAX_SEC_MAC_OVER· 600

RPR_EXCEED_MAX_STATION· 601

RPR_EXCEED_MAX_STATION_OVER· 601

RPR_EXCEED_RESERVED_RATE· 601

RPR_EXCEED_RESERVED_RATE_OVER· 602

RPR_IP_DUPLICATE· 602

RPR_IP_DUPLICATE_OVER· 602

RPR_JUMBO_INCONSISTENT· 603

RPR_JUMBO_INCONSISTENT_OVER· 603

RPR_LAGGCONFIG_INCONSISTENT· 603

RPR_LAGGCONFIG_INCONSISTENT_OVER· 604

RPR_MISCABLING·· 604

RPR_MISCABLING_OVER· 604

RPR_PROTECTION_INCONSISTENT· 605

RPR_PROTECTION_INCONSISTENT_OVER· 605

RPR_SEC_MAC_DUPLICATE· 605

RPR_SEC_MAC_DUPLICATE_OVER· 606

RPR_TOPOLOGY_INCONSISTENT· 606

RPR_TOPOLOGY_INCONSISTENT_OVER· 606

RPR_TOPOLOGY_INSTABILITY· 607

RPR_TOPOLOGY_INSTABILITY_OVER· 607

RPR_TOPOLOGY_INVALID·· 607

RPR_TOPOLOGY_INVALID_OVER· 608

RRPP messages· 608

RRPP_RING_FAIL· 608

RRPP_RING_RESTORE· 608

RTM messages· 608

RTM_TCL_NOT_EXIST· 609

RTM_TCL_MODIFY· 609

RTM_TCL_LOAD_FAILED·· 609

SCMD messages· 609

PROCESS_ABNORMAL· 610

PROCESS_ACTIVEFAILED·· 611

SCM_ABNORMAL_REBOOT· 611

SCM_ABNORMAL_REBOOTMDC· 612

SCM_ABORT_RESTORE· 612

SCM_INSMOD_ADDON_TOOLONG·· 613

SCM_KERNEL_INIT_TOOLONG·· 613

SCM_KILL_PROCESS· 614

SCM_PROCESS_STARTING_TOOLONG·· 615

SCM_PROCESS_STILL_STARTING·· 616

SCM_SKIP_PROCESS· 616

SCRLSP messages· 617

SCRLSP_LABEL_DUPLICATE· 617

SESSION messages· 617

SESSION_IPV4_FLOW·· 618

SESSION_IPV6_FLOW·· 619

SFLOW messages· 620

SFLOW_HARDWARE_ERROR· 620

SHELL messages· 620

SHELL_CMD·· 621

SHELL_CMD_CONFIRM·· 621

SHELL_CMD_EXECUTEFAIL· 621

SHELL_CMD_INPUT· 622

SHELL_CMD_INPUT_TIMEOUT· 622

SHELL_CMD_INVALID_CHARACTER· 622

SHELL_CMD_MATCHFAIL· 623

SHELL_CMDDENY· 623

SHELL_CMDFAIL· 623

SHELL_COMMIT· 624

SHELL_COMMIT_DELAY· 624

SHELL_COMMIT_REDELAY· 624

SHELL_COMMIT_ROLLBACK· 625

SHELL_COMMIT_ROLLBACKDONE· 625

SHELL_COMMIT_WILLROLLBACK· 625

SHELL_CRITICAL_CMDFAIL· 626

SHELL_LOGIN· 626

SHELL_LOGOUT· 626

SLSP messages· 627

SLSP_LABEL_DUPLICATE· 627

SMLK messages· 627

SMLK_LINK_SWITCH· 627

SNMP messages· 627

SNMP_ACL_RESTRICTION· 628

SNMP_AUTHENTICATION_FAILURE· 628

SNMP_GET· 628

SNMP_INFORM_LOST· 629

SNMP_NOTIFY· 630

SNMP_SET· 631

SNMP_USM_NOTINTIMEWINDOW·· 631

SSHC messages· 631

SSHC_ALGORITHM_MISMATCH· 632

SSHC_AUTH_PASSWORD_FAIL· 632

SSHC_AUTH_PUBLICKEY_FAIL· 632

SSHC_CERT_VERIFY_FAIL· 633

SSHC_CONNECT_FAIL· 634

SSHC_DECRYPT_FAIL· 634

SSHC_DISCONNECT· 635

SSHC_ENCRYPT_FAIL· 635

SSHC_HOST_NAME_ERROR· 635

SSHC_KEY_EXCHANGE_FAIL· 636

SSHC_MAC_ERROR· 636

SSHC_PUBLICKEY_NOT_EXIST· 636

SSHC_VERSION_MISMATCH· 637

SSHS messages· 637

SSHS_ACL_DENY· 637

SSHS_ALGORITHM_MISMATCH· 637

SSHS_AUTH_EXCEED_RETRY_TIMES· 638

SSHS_AUTH_FAIL· 638

SSHS_AUTH_KBDINT_FAIL· 638

SSHS_AUTH_PWD_FAIL· 639

SSHS_AUTH_TIMEOUT· 639

SSHS_AUTH_SUCCESS· 639

SSHS_AUTHOR_FAIL· 640

SSHS_CERT_VERIFY_FAIL· 641

SSHS_CONNECT· 642

SSHS_DECRYPT_FAIL· 642

SSHS_DISCONNECT· 643

SSHS_ENCRYPT_FAIL· 643

SSHS_LOG·· 643

SSHS_MAC_ERROR· 644

SSHS_REACH_SESSION_LIMIT· 644

SSHS_REACH_USER_LIMIT· 644

SSHS_SCP_OPER· 645

SSHS_SFTP_OPER· 645

SSHS_SRV_UNAVAILABLE· 646

SSHS_VERSION_MISMATCH· 646

STAMGR messages· 646

STAMGR_ADD_FAILVLAN· 646

STAMGR_ADDBAC_INFO·· 647

STAMGR_ADDSTA_INFO·· 647

STAMGR_AUTHORACL_FAILURE· 647

STAMGR_AUTHORUSERPROFILE_FAILURE· 648

STAMGR_CLIENT_OFFLINE· 648

STAMGR_CLIENT_ONLINE· 649

STAMGR_DELBAC_INFO·· 649

STAMGR_DELSTA_INFO·· 649

STAMGR_DOT1X_LOGIN_FAILURE· 650

STAMGR_DOT1X_LOGIN_SUCC· 650

STAMGR_DOT1X_LOGOFF· 651

STAMGR_MACA_LOGIN_FAILURE· 651

STAMGR_MACA_LOGIN_SUCC· 652

STAMGR_MACA_LOGOFF· 652

STAMGR_STAIPCHANGE_INFO·· 653

STAMGR_TRIGGER_IP· 653

STM messages· 653

STM_AUTO_UPDATE_FAILED·· 654

STM_AUTO_UPDATE_FINISHED·· 655

STM_AUTO_UPDATING·· 655

STM_LINK_DOWN· 656

STM_LINK_TIMEOUT· 656

STM_LINK_UP· 656

STM_MERGE· 657

STM_MERGE_NEED_REBOOT· 657

STM_MERGE_NOT_NEED_REBOOT· 657

STM_SAMEMAC· 658

STM_SOMER_CHECK· 658

STP messages· 658

STP_BPDU_PROTECTION· 658

STP_BPDU_RECEIVE_EXPIRY· 659

STP_CONSISTENCY_RESTORATION· 659

STP_DETECTED_TC· 659

STP_DISABLE· 660

STP_DISCARDING·· 660

STP_DISPUTE· 660

STP_ENABLE· 661

STP_FORWARDING·· 661

STP_LOOP_PROTECTION· 661

STP_LOOPBACK_PROTECTION· 662

STP_NOT_ROOT· 662

STP_NOTIFIED_TC· 662

STP_PORT_TYPE_INCONSISTENCY· 663

STP_PVID_INCONSISTENCY· 663

STP_PVST_BPDU_PROTECTION· 663

STP_ROOT_PROTECTION· 664

TACACS messages· 664

TACACS_AUTH_FAILURE· 664

TACACS_AUTH_SUCCESS· 665

TACACS_DELETE_HOST_FAIL· 665

TELNETD messages· 665

TELNETD_ACL_DENY· 665

TELNETD_REACH_SESSION_LIMIT· 666

TRILL messages· 666

TRILL_DUP_SYSTEMID·· 666

TRILL_INTF_CAPABILITY· 667

TRILL_LICENSE_EXPIRED·· 667

TRILL_LICENSE_EXPIRED_TIME· 667

TRILL_LICENSE_UNAVAILABLE· 668

TRILL_MEM_ALERT· 668

TRILL_NBR_CHG·· 668

VCF messages· 669

VCF_AGGR_CREAT· 669

VCF_AGGR_DELETE· 669

VCF_AGGR_FAILED·· 670

VCF_AUTO_ANALYZE_USERDEF· 670

VCF_AUTO_NO_USERDEF· 670

VCF_AUTO_START· 671

VCF_AUTO_STATIC_CMD·· 671

VCF_BGP· 671

VCF_DOWN_LINK· 672

VCF_GET_IMAGE· 672

VCF_GET_TEMPLATE· 673

VCF_INSTALL_IMAGE· 673

VCF_IRF_FINISH· 673

VCF_IRF_FOUND·· 674

VCF_IRF_REBOOT· 674

VCF_IRF_START· 675

VCF_LOOPBACK_START· 675

VCF_LOOPBACK_START_FAILED·· 676

VCF_LOOPBACK_ALLOC· 676

VCF_LOOPBACK_NO_FREE_IP· 677

VCF_LOOPBACK_RECLAIM·· 677

VCF_REBOOT· 678

VCF_SKIP_INSTALL· 678

VCF_STATIC_CMD_ERROR· 678

VCF_UP_LINK· 679

VLAN messages· 679

VLAN_CREATEFAIL· 679

VLAN_FAILED·· 680

VLAN_QINQETHTYPE_FAILED·· 680

VLAN_VLANMAPPING_FAILED·· 680

VLAN_VLANTRANSPARENT_FAILED·· 681

VRRP messages· 681

VRRP_STATUS_CHANGE· 682

VRRP_VF_STATUS_CHANGE· 683

VRRP_VMAC_INEFFECTIVE· 683

VSRP messages· 683

VSRP_BIND_FAILED·· 684

VXLAN messages· 684

VXLAN_LICENSE_UNAVAILABLE· 684

WEB messages· 684

LOGIN· 685

LOGIN_FAILED·· 685

LOGOUT· 685

WIPS messages· 685

APFLOOD·· 686

AP_CHANNEL_CHANGE· 686

ASSOCIATEOVERFLOW·· 686

HONEYPOT· 687

HTGREENMODE· 687

MAN_IN_MIDDLE· 687

WIPS_DOS· 688

WIPS_FLOOD·· 688

WIPS_MALF· 689

WIPS_SPOOF· 689

WIPS_WEAKIV· 690

WIRELESSBRIDGE· 690

 


Introduction

This document includes the following system messages:

·           Messages specific to Release xxx of the switch.

·           Messages for the Comware 7 software platform version based on which Release xxx was produced. Some platform system messages might not be available on the switch.

This document is intended only for managing XXX switches. Do not use this document for any other device models.

This document assumes that the readers are familiar with data communications technologies and H3C networking products.

System log message format

By default, the system log messages use one of the following formats depending on the output destination:

·           Log host:

<PRI>TIMESTAMP Sysname %%vendorMODULE/severity/MNEMONIC: location; CONTENT

·           Destinations except for the log host:

Prefix TIMESTAMP Sysname MODULE/severity/MNEMONIC: CONTENT

 

 

NOTE:

Log message examples in this document use the format for destinations except the log host. They do not contain elements available only for the log host, including the location element.

 

Table 1 System log message elements

Element

Description

<PRI>

Priority identifier. This element is contained only in messages sent to the log host.

It is calculated by using the following formula:

Priority identifier=facilityx8+severity

Where:

·          Facility is specified by using the info-center loghost command. A log host uses this parameter to identify log sources and filter log messages.

·          Severity represents the importance of the message. For more information about severity levels, see Table 2.

Prefix

Message type identifier. This element is contained in the system log messages sent to non-log host destinations.

The element uses the following symbols to indicate message severity:

·          Percentage sign (%)—Informational and higher levels.

·          Asterisk (*)—Debug level.

TIMESTAMP

Date and time when the event occurred.

The following are commands for configuring the timestamp format:

·          Log host—Use the info-center timestamp loghost command.

·          Non-log-host destinations—Use the info-center timestamp command.

Sysname

Name or IP address of the device that generated the message.

%%vendor

Manufacturer flag. This element is %%10 for H3C.

This element is only available in messages sent to the log host.

MODULE

Name of the module that produced the message.

severity

Severity level of the message. (For more information about severity levels, see Table 2.)

MNEMONIC

Text string that uniquely identifies the system message. The maximum length is 32 characters.

location

Optional. This element identifies where the message occurred. This element is contained only in messages sent to the log host.

This element presents location information for the message in the following format:

-attribute1=x-attribute2=y…-attributeN=z

The following are examples of location attributes:

·          -MDC=XX, which represents the MDC on which the message occurred.

·          -DevIp=XXX.XXX.XXX.XXX, which represents the source IP of the message.

·          -Slot=XX, which represents the slot on which the message occurred.

·          -Chassis=XX-Slot=XX, which represents the chassis and slot on which the message occurred.

This element is separated from the message description by using a semicolon (;).

CONTENT

Text string that contains detailed information about the event or error.

For variable fields in this element, this document uses the representations in Table 3.

 

System log messages are classified into eight severity levels from 0 to 7. The lower the number, the higher the severity, as shown in Table 2.

Table 2 System log message severity levels

Level

Severity

Description

0

Emergency

The system is unusable. For example, the system authorization has expired.

1

Alert

Action must be taken immediately. For example, traffic on an interface exceeds the upper limit.

2

Critical

Critical condition. For example, the device temperature exceeds the upper limit, the power module fails, or the fan tray fails.

3

Error

Error condition. For example, the link state changes or a storage card is unplugged.

4

Warning

Warning condition. For example, an interface is disconnected, or the memory resources are used up.

5

Notification

Normal but significant condition. For example, a terminal logs in to the device, or the device reboots.

6

Informational

Informational message. For example, a command or a ping operation is executed.

7

Debug

Debugging message.

 

For variable fields in the message text, this document uses the representations in Table 3. The values are case insensitive, even though the representations are uppercase letters.

Table 3 Variable field representations

Representation

Information type

INT16

Signed 16-bit decimal number.

UINT16

Unsigned 16-bit decimal number.

INT32

Signed 32-bit decimal number.

UINT32

Unsigned 32-bit decimal number.

INT64

Signed 64-bit decimal number.

UINT64

Unsigned 64-bit decimal number.

DOUBLE

Two dot-separated signed 32-bit decimal numbers. The format is [INTEGER].[INTEGER].

HEX

Hexadecimal number.

CHAR

Single character.

STRING

Character string.

IPADDR

IP address.

MAC

MAC address.

DATE

Date.

TIME

Time.

 

Managing and obtaining system log messages

You can manage system log messages by using the information center.

By default, the information center is enabled. Log messages can be output to the console, log buffer, monitor terminal, log host, and log file.

To filter log messages, use the info-center source command to specify log output rules. A log output rule specifies the source modules and the lowest severity level of log messages that can be output to a destination. A log message is output if its severity level is higher than or equal to the specified level. For example, if you specify a severity level of 6 (informational), log messages that have a severity level from 0 to 6 are output.

For more information about using the information center, see the network management and monitoring configuration guide for the product.

Obtaining log messages from the console terminal

Access the device through the console port. Real-time log messages are displayed on the console terminal.

Obtaining log messages from the log buffer

Use the display logbuffer command to display history log messages in the log buffer.

Obtaining log messages from a monitor terminal

Monitor terminals refer to terminals that access the device through the AUX, VTY, or TTY lines (for example, Telnet). To obtain log messages from a monitor terminal, use the following guidelines:

·           To display log messages on the monitor terminal, you must configure the terminal monitor command.

·           For monitor terminals, the lowest level of log messages that can be displayed is determined by both the terminal logging level and info-center source commands.

Obtaining log messages from the log file

By default, the log file feature automatically saves logs from the log file buffer to the log file every 24 hours. You can use the info-center logfile frequency command to change the automatic saving internal.

To manually save logs to the log file, use the logfile save command. The log file buffer is cleared each time a save operation is performed.

By default, you can obtain the log file from the cfa0:/logfile/ path if the CF card is not partitioned. If the CF card is partitioned, the file path is cfa1:/logfile/.

Obtaining log messages from a log host

Use the info-center loghost command to specify the service port number and IP address of a log host. To specify multiple log hosts, repeat the command.

For a successful log message transmission, make sure the specified port number is the same as the port number used on the log host. The default service port number is 514.

Software module list

Table 4 lists all software modules that might produce system log messages. This document uses "OPENSRC" to represent all open source modules.

Table 4 Software module list

Module name representation

Module name expansion

AAA

Authentication, Authorization and Accounting

ACL

Access Control List

ANCP

Access Node Control Protocol

APMGR

Access Point Management

ARP

Address Resolution Protocol

ATK

Attack Detection and Prevention

ATM

Asynchronous Transfer Mode

BFD

Bidirectional Forwarding Detection

BGP

Border Gateway Protocol

BLS

Blacklist

CFD

Connectivity Fault Detection

CFGMAN

Configuration Management

CONNLMT

Connection Limit

DEV

Device Management

DHCP

Dynamic Host Configuration Protocol

DHCPR

IPv4 DHCP Relay

DHCPS

DHCP Server

DHCPS6

DHCPv6 Server

DHCPSP4

DHCP Snooping

DHCPSP6

DHCPv6 Snooping

DIAG

Diagnosis

DLDP

Device Link Detection Protocol

DOT1X

802.1X

DRNI

Distributed Resilient Network Interconnect

EDEV

Extended-Device Management

ERPS

Ethernet Ring Protection Switching

ETH

Ethernet

ETHOAM

Ethernet Operation, Administration and Maintenance

EVB

Edge Virtual Bridging

EVIISIS

Ethernet Virtual Interconnect Intermediate System-to-Intermediate System

FCOE

Fibre Channel Over Ethernet

FCLINK

Fibre Channel Link

FCZONE

Fibre Channel Zone

FIB

Forwarding Information Base

FILTER

Filter

FIPSNG

FIP Snooping

FS

File System

FTPD

File Transfer Protocol Daemon

gRPC

Google Remote Procedure Call

HA

High Availability

HQOS

Hierarchical QoS

HTTPD

Hypertext Transfer Protocol Daemon

IFNET

Interface Net Management

IKE

Internet Key Exchange

IP6ADDR

IPv6 addressing

IPADDR

IP addressing

IPFW

IP Forwarding

IPSEC

IP Security

IPSG

IP Source Guard

IRDP

ICMP Router Discovery Protocol

IRF

Intelligent Resilient Framework

ISIS

Intermediate System-to-Intermediate System

ISSU

In-Service Software Upgrade

L2PT

Layer 2 Protocol Tunneling

L2TPV2

Layer 2 Tunneling Protocol Version 2

L2VPN

Layer 2 VPN

LAGG

Link Aggregation

LDP

Label Distribution Protocol

LLDP

Link Layer Discovery Protocol

LOAD

Load Management

LOGIN

Login

LPDT

Loopback Detection

LS

Local Server

LSPV

LSP Verification

MAC

Media Access Control

MACA

MAC Authentication

MACSEC

MAC Security

MBFD

MPLS BFD

MBUF

Memory buffer

MDC

Multitenant Device Context

MFIB

Multicast Forwarding Information Base

MGROUP

Mirroring group

MPLS

Multiprotocol Label Switching

MTLK

Monitor Link

NAT

Network Address Translation

NETCONF

Network Configuration Protocol

ND

Neighbor Discovery

NQA

Network Quality Analyzer

NTP

Network Time Protocol

OAP

Open Application Platform

OPENSRC (FreeRADIUS)

Open Source

OBJP

Object Policy

OFP

OpenFlow Protocol

OPTMOD

Optical Module

OSPF

Open Shortest Path First

OSPFV3

Open Shortest Path First Version 3

PKTCPT

Packet Capture

PFILTER

Packet Filter

PBB

Provider Backbone Bridge

PBR

Policy-Based Routing

PCE

Path Computation Element

PEX

Port Extender

PIM

Protocol Independent Multicast

PING

Packet Internet Groper

PKG

Package

PKI

Public Key Infrastructure

PKT2CPU

Packet to CPU

PORTAL

Portal

PORTSEC

Port Security

PPP

Point to Point Protocol

PWDCTL

Password Control

QOS

Quality of Service

RADIUS

Remote Authentication Dial In User Service

RESMON

Resource Monitor

RDDC

Redundancy

RIP

Routing Information Protocol

RIPNG

Routing Information Protocol Next Generation

RM

Routing Management

RPR

Resilient Packet Ring

RRPP

Rapid Ring Protection Protocol

RTM

Real-Time Event Manager

SCMD

Service Control Manager Daemon

SCRLSP

Static CRLSP

SESSION

Session

SFLOW

Sampler Flow

SHELL

Shell

SLSP

Static LSP

SMLK

Smart Link

SNMP

Simple Network Management Protocol

SSHC

Secure Shell Client

SSHS

Secure Shell Server

STAMGR

Station Management

STM

Stack Topology Management

STP

Spanning Tree Protocol

SYSEVENT

System Event

SYSLOG

System Log

TACACS

Terminal Access Controller Access Control System

TELNETD

Telnet Daemon

TRILL

Transparent Interconnect of Lots of Links

VCF

Vertical Converged Framework

VLAN

Virtual Local Area Network

VRRP

Virtual Router Redundancy Protocol

VSRP

Virtual Service Redundancy Protocol

VXLAN

Virtual eXtensible LAN

WEB

Web

WIPS

Wireless Intrusion Prevention System

 

Using this document

This document categorizes system log messages by software module. The modules are ordered alphabetically. Except for OPENSRC, the system log messages for each module are listed in alphabetic order of their mnemonic names. The OPENSRC messages are unordered because they use the same mnemonic name (SYSLOG). For each OPENSRC message, the section title uses a short description instead of the mnemonic name.

This document explains messages in tables. Table 5 describes information provided in these tables.

Table 5 Message explanation table contents

Item

Content

Example

Message text

Presents the message description.

ACL [UINT32] [STRING] [UINT64] packet(s).

Variable fields

Briefly describes the variable fields in the order that they appear in the message text.

The variable fields are numbered in the "$Number" form to help you identify their location in the message text.

$1: ACL number.

$2: ID and content of an ACL rule.

$3: Number of packets that matched the rule.

Severity level

Provides the severity level of the message.

6

Example

Provides a real message example. The examples do not include the "<PRI>TIMESTAMP Sysname %%vendor" part or the "Prefix TIMESTAMP Sysname" part, because information in this part varies with system settings.

ACL/6/ACL_STATIS_INFO: ACL 2000 rule 0 permit source 1.1.1.1 0 logging 10000 packet(s).

Explanation

Explains the message, including the event or error cause.

Number of packets that matched an ACL rule. This message is sent when the packet counter changes.

Recommended action

Provides recommended actions. For informational messages, no action is required.

No action is required.

 

AAA messages

This section contains AAA messages.

AAA_FAILURE

Message text

-AAAType=[STRING]-AAADomain=[STRING]-Service=[STRING]-UserName=[STRING]; AAA failed.

Variable fields

$1: AAA type.

$2: AAA scheme.

$3: Service.

$4: Username.

Severity level

5

Example

AAA/5/AAA_FAILURE: -AAAType=AUTHOR-AAADomain=domain1-Service=login-UserName=cwf@system; AAA failed.

Explanation

An AAA request was rejected.

The following are the common reasons:

·          No response was received from the server.

·          The username or password was incorrect.

·          The service type that the user applied for was incorrect.

Recommended action

1.      Verify that the device is correctly connected to the server.

2.      Enter the correct username and password.

3.      Verify that the server settings are the same as the settings on the device.

4.      If the problem persists, contact H3C Support.

 

AAA_LAUNCH

Message text

-AAAType=[STRING]-AAADomain=[STRING]-Service=[STRING]-UserName=[STRING]; AAA launched.

Variable fields

$1: AAA type.

$2: AAA scheme.

$3: Service.

$4: Username.

Severity level

6

Example

AAA/6/AAA_LAUNCH: -AAAType=AUTHEN-AAADomain=domain1-Service=login-UserName=cwf@system; AAA launched.

Explanation

An AAA request was received.

Recommended action

No action is required.

 

AAA_SUCCESS

Message text

-AAAType=[STRING]-AAADomain=[STRING]-Service=[STRING]-UserName=[STRING]; AAA succeeded.

Variable fields

$1: AAA type.

$2: AAA scheme.

$3: Service.

$4: Username.

Severity level

6

Example

AAA/6/AAA_SUCCESS: -AAAType=AUTHOR-AAADomain=domain1-Service=login-UserName=cwf@system; AAA succeeded.

Explanation

An AAA request was accepted.

Recommended action

No action is required.

 

ACL messages

This section contains ACL messages.

ACL_ACCELERATE_NO_RES

Message text

Failed to accelerate [STRING] ACL [UINT32]. The resources are insufficient.

Variable fields

$1: ACL type.

$2: ACL number.

Severity level

4

Example

ACL/4/ACL_ACCELERATE_NO_RES: Failed to accelerate IPv6 ACL 2001. The resources are insufficient.

Explanation

Hardware resources were insufficient for accelerating an ACL.

Recommended action

Delete some rules or disabled ACL acceleration for other ACLs to release hardware resources.

 

ACL_ACCELERATE_NONCONTIGUOUSMASK

Message text

Failed to accelerate ACL [UINT32]. ACL acceleration supports only contiguous wildcard masks.

Variable fields

$1: ACL number.

Severity level

4

Example

ACL/4/ACL_ACCELERATE_NONCONTIGUOUSMASK: Failed to accelerate ACL 2001. ACL acceleration supports only contiguous wildcard masks.

Explanation

ACL acceleration failed because rules containing noncontiguous wildcard masks exist in the ACL.

Recommended action

Check the ACL rules and delete the unsupported configuration.

 

ACL_ACCELERATE_NOT_SUPPORT

Message text

Failed to accelerate [STRING] ACL [UINT32]. The operation is not supported.

Variable fields

$1: ACL type.

$2: ACL number.

Severity level

4

Example

ACL/4/ACL_ACCELERATE_NOT_SUPPORT: Failed to accelerate IPv6 ACL 2001. The operation is not supported.

Explanation

ACL acceleration failed because the system does not support ACL acceleration.

Recommended action

No action is required.

 

ACL_ACCELERATE_NOT_SUPPORTHOPBYHOP

Message text

Failed to accelerate IPv6 ACL [UINT32]. ACL acceleration does not support the rules that contain the hop-by-hop keywords.

Variable fields

$1: ACL number.

Severity level

4

Example

ACL/4/ACL_ACCELERATE_NOT_SUPPORTHOPBYHOP: Failed to accelerate IPv6 ACL 2001. ACL acceleration does not support the rules that contain the hop-by-hop keywords.

Explanation

ACL acceleration failed for the IPv6 ACL because rules containing the hop-by-hop keyword exist in the ACL.

Recommended action

Check the ACL rules and delete the unsupported configuration.

 

ACL_ACCELERATE_NOT_SUPPORTMULTITCPFLAG

Message text

Failed to accelerate IPv6 ACL [UINT32]. ACL acceleration does not support specifying multiple TCP flags in one rule.

Variable fields

$1: ACL number.

Severity level

4

Example

ACL/4/ACL_ACCELERATE_NOT_SUPPORTMULTITCPFLAG: Failed to accelerate IPv6 ACL 2001. ACL acceleration does not support specifying multiple TCP flags in one rule.

Explanation

ACL acceleration failed for the IPv6 ACL because rules containing multiple TCP flags exist in the ACL.

Recommended action

Check the ACL rules and delete the unsupported configuration.

 

ACL_ACCELERATE_UNK_ERR

Message text

Failed to accelerate [STRING] ACL [UINT32].

Variable fields

$1: ACL type.

$2: ACL number.

Severity level

4

Example

ACL/4/ACL_ACCELERATE_UNK_ERR: Failed to accelerate IPv6 ACL 2001.

Explanation

ACL acceleration failed because of an unknown error.

Recommended action

No action is required.

 

ACL_IPV6_STATIS_INFO

Message text

IPv6 ACL [UINT32] [STRING] [UINT64] packet(s).

Variable fields

$1: ACL number.

$2: ID and content of an IPv6 ACL rule.

$3: Number of packets that matched the rule.

Severity level

6

Example

ACL6/6/ACL_IPV6_STATIS_INFO: IPv6 ACL 2000 rule 0 permit source 1:1::/64 logging 1000 packet(s).

Explanation

The number of packets matching the IPv6 ACL rule changed.

Recommended action

No action is required.

 

ACL_NO_MEM

Message text

Failed to configure [STRING] ACL [UINT] due to lack of memory.

Variable fields

$1: ACL type.

$2: ACL number.

Severity level

3

Example

ACL/3/ACL_NO_MEM: Failed to configure ACL 2001 due to lack of memory.

Explanation

Configuring the ACL failed because memory is insufficient.

Recommended action

Use the display memory-threshold command to check the memory usage.

 

ACL_STATIS_INFO

Message text

ACL [UINT32] [STRING] [UINT64] packet(s).

Variable fields

$1: ACL number.

$2: ID and content of an IPv4 ACL rule.

$3: Number of packets that matched the rule.

Severity level

6

Example

ACL/6/ACL_STATIS_INFO: ACL 2000 rule 0 permit source 1.1.1.1 0 logging 10000 packet(s).

Explanation

The number of packets matching the IPv4 ACL rule changed.

Recommended action

No action is required.

 

 

ANCP messages

This section contains ANCP messages.

ANCP_INVALID_PACKET

Message text

-NeighborName=[STRING]-State=[STRING]-MessageType=[STRING]; The [STRING] value [STRING] is wrong, and the value [STRING] is expected.

Variable fields

$1: ANCP neighbor name.

$2: Neighbor state.

$3: Message type.

$4: Field.

$5: Wrong value of the field.

$6: Expected value of the field.

Severity level

6

Example

ANCP/6/ANCP_INVALID_PACKET: -NeighborName=Dslam-State=SYNSENT-MessageType=SYNACK; The Sender Instance value 0 is wrong, and the value 1 is expected.

Explanation

The system received an adjacency message that had a field with a wrong value.

Recommended action

No action is required.

 

 

APMGR messages

This section contains access point management messages.

APMGR_AC_MEM_ALERT

Message text

The memory utilization has reached the threshold.

Variable fields

N/A

Severity level

4

Example

APMGR/4/APMGR_AC_MEM_ALERT: The memory utilization has reached the threshold.

Explanation

The AP failed to come online because the memory utilization exceeded the limit.

Recommended action

Stop creating manual APs and prevent APs from coming online.

 

APMGR_ADD_AP_FAIL

Message text

AP [STRING] failed to come online using serial ID [STRING]: MAC address [STRING] is being used by AP [STRING].

Variable fields

$1: AP name.

$2: Serial ID.

$3: MAC address.

$4: AP name.

Severity level

4

Example

APMGR/4/ APMGR_ADD_AP_FAIL: AP ap1 failed to come online using serial ID 01247ef96: MAC address 0023-7961-5201 is being used by AP ap2.

Explanation

The AP failed to come online because a manual AP that has the same MAC address already exists on the AC.

Recommended action

Delete either the manual AP that has the MAC address or the serial ID.

 

APMGR_ADDBAC_INFO

Message text

Add BAS AC [STRING].

Variable fields

$1: MAC address of the BAS AC.

Severity level

6

Example

APMGR/6/APMGR_ADDBAC_INFO: Add BAS AC 3ce5-a616-28cd.

Explanation

The BAS AC was connected to the master AC.

Recommended action

No action is required.

 

APMGR_AP_OFFLINE

Message text

AP [STRING] went offline. State changed to Idle.

Variable fields

$1: AP name.

Severity level

6

Example

APMGR/6/APMGR_AP_OFFLINE: AP ap1 went offline. State changed to Idle.

Explanation

The AP went offline. The state of the AP changed to Idle.

Recommended action

If the AP went offline abnormally, check the debugging information to locate the issue and resolve it.

 

APMGR_AP_ONLINE

Message text

AP [STRING] went online. State changed to Run.

Variable fields

$1: AP name.

Severity level

6

Example

APMGR/6/APMGR_AP_ONLINE: AP ap1 went online. State changed to Run.

Explanation

The AP came online. The state of the AP changed to Run.

Recommended action

No action is required.

 

APMGR_CWC_IMG_DOWNLOAD_COMPLETE

Message text

System software image file [STRING] downloading through the CAPWAP tunnel to AC [STRING] completed.

Variable fields

$1: Image file name.

$2: AC IP address.

Severity level

6

Example

APMGR/6/APMGR_CWC_IMG_DOWNLOAD_COMPLETE: System software image file 5800.ipe downloading through the CAPWAP tunnel to AC 192.168.10.1 completed.

Explanation

The AP downloaded the image file from the AC successfully.

Recommended action

No action is required.

 

APMGR_CWC_IMG_DOWNLOAD_START

Message text

Started to download the system software image file [STRING] through the CAPWAP tunnel to AC [STRING].

Variable fields

$1: Image file name.

$2: AC IP address.

Severity level

6

Example

APMGR/6/APMGR_CWC_IMG_DOWNLOAD_START: Started to download the system software image file 5800.ipe through the CAPWAP tunnel to AC 192.168.10.1.

Explanation

The AP started to download the image file from the AC.

Recommended action

Make sure the AP is correctly connected to the AC.

 

APMGR_CWC_IMG_NO_ENOUGH_SPACE

Message text

Insufficient flash memory space for downloading system software image file [STRING].

Variable fields

$1: Image file name.

Severity level

6

Example

APMGR/6/APMGR_CWC_IMG_NO_ENOUGH_SPACE: Insufficient flash memory space for downloading system software image file 5800.ipe.

Explanation

The AP failed to download the image file from the AC because of insufficient flash memory.

Recommended action

Delete files not in use from the AP.

 

APMGR_CWC_LOCAL_AC_DOWN

Message text

CAPWAP tunnel to Central AC [STRING] went down. Reason: [STRING].

Variable fields

$1: IP address of the central AC.

$2: Reason:

·          Added local AC IP address.

·          Deleted local AC IP address.

·          Local AC interface used for CAPWAP tunnel went down.

·          Local AC config changed.

·          N/A

Severity level

4

Example

APMGR/4/APMGR_CWC_LOCAL_AC_DOWN: CAPWAP tunnel to Central AC 2.2.2.1 went down. Reason: Added local AC IP address.

Explanation

The CAPWAP tunnel between the central AC and the local AC was terminated for a specific reason.

Recommended action

To resolve the issue:

5.      Examine the network connection between the central AC and the local AC.

6.      Verify that the central AC is correctly configured.

7.      Verify that the local AC is correctly configured.

8.      If the issue persists, contact H3C Support.

 

APMGR_CWC_LOCAL_AC_UP

Message text

CAPWAP tunnel to Central AC [STRING] went up.

Variable fields

$1: IP address of the central AC.

Severity level

6

Example

APMGR/6/APMGR_CWC_LOCAL_AC_UP: CAPWAP tunnel to Central AC 2.2.2.1 went up.

Explanation

The central AC has established a CAPWAP tunnel with the local AC.

Recommended action

No action is required.

 

APMGR_CWC_REBOOT

Message text

AP in state [STRING] is rebooting. Reason: [STRING]

Variable fields

$1: AP state.

$2: Reason:

·          AP was reset.

·          Image was downloaded successfully.

·          AP stayed in idle state for a long time.

Severity level

6

Example

APMGR/6/APMGR_CWC_REBOOT: AP in State Run is rebooting. Reason: AP was reset.

Explanation

The AP rebooted for a specific reason.

Recommended action

No action is required.

 

APMGR_CWC_RUN_DOWNLOAD_COMPLETE

Message text

File [STRING] successfully downloaded through the CAPWAP tunnel to AC [STRING].

Variable fields

$1: File name.

$2: AC IP address.

Severity level

6

Example

APMGR/6/APMGR_CWC_RUN_DOWNLOAD_COMPLETE: File ac.cfg successfully downloaded through the CAPWAP tunnel to AC 192.168.10.1.

Explanation

The AP downloaded the file from the AC successfully.

Recommended action

No action is required.

 

APMGR_CWC_RUN_DOWNLOAD_START

Message text

Started to download the file [STRING] through the CAPWAP tunnel to AC [STRING].

Variable fields

$1: File name.

$2: AC IP address.

Severity level

6

Example

APMGR/6/APMGR_CWC_RUN_DOWNLOAD_START: Started to download the file ac.cfg through the CAPWAP tunnel to AC 192.168.10.1.

Explanation

The AP started to download the file from the AC.

Recommended action

Make sure the AP is correctly connected to the AC.

 

APMGR_CWC_RUN_NO_ENOUGH_SPACE

Message text

Insufficient flash memory space for downloading file [STRING].

Variable fields

$1: File name.

Severity level

6

Example

APMGR/6/APMGR_CWC_RUN_NO_ENOUGH_SPACE: Insufficient flash memory space for downloading file ac.cfg.

Explanation

The AP failed to download the file from the AC because of insufficient flash memory.

Recommended action

Delete files not in use from the AP.

 

APMGR_CWC_TUNNEL_DOWN

Message text

CAPWAP tunnel to AC [STRING] went down. Reason: [STRING].

Variable fields

$1: AC IP address.

$2: Reason:

·          Added AP IP address.

·          Deleted AP IP address.

·          AP interface used for CAPWAP tunnel went down.

·          AP config changed.

·          AP was reset.

·          Number of echo retransmission attempts exceeded the limit.

·          Full retransmission queue.

·          Data channel timer expired.

·          Backup AC IP address changed.

·          Backup tunnel changed to master tunnel.

·          Failed to change backup tunnel to master tunnel.

·          Backup method changed.

·          N/A.

Severity level

6

Example

APMGR/6/APMGR_CWC_TUNNEL_DOWN: CAPWAP tunnel to AC 192.168.10.1 went down. Reason: AP was reset.

Explanation

The CAPWAP tunnel between the AP and the AC was terminated for a specific reason.

Recommended action

Examine the network connection between the AP and the AC.

 

APMGR_CWC_TUNNEL_UP

Message text

[STRING] CAPWAP tunnel to AC [STRING] went up.

Variable fields

$1: Tunnel type:

·          Master.

·          Backup.

$2: AC IP address.

Severity level

6

Example

APMGR/6/APMGR_CWC_TUNNEL_UP: Master CAPWAP tunnel to AC 192.168.10.1 went up.

Explanation

The AP was connected to the AC successfully and entered Run state.

Recommended action

No action is required.

 

APMGR_CWS_IMG_DOWNLOAD_COMPLETE

Message text

System software image file [STRING] downloading through the CAPWAP tunnel for AP [STRING] completed.

Variable fields

$1: Image file name.

$2: AP name.

Severity level

6

Example

APMGR/6/APMGR_ CWS_IMG_DOWNLOAD_COMPLETE: System software image file 5800.ipe downloading through the CAPWAP tunnel for AP ap2 completed.

Explanation

The AP downloaded the image file from the AC successfully.

Recommended action

No action is required.

 

APMGR_CWS_IMG_DOWNLOAD_START

Message text

AP [STRING] started to download the system software image file [STRING].

Variable fields

$1: AP name.

$2: Image file name.

Severity level

6

Example

APMGR/6/APMGR_CWS_IMG_DOWNLOAD_START: AP ap1 started to download the system software image file 5800.ipe.

Explanation

The AP started to download the image file from the AC.

Recommended action

No action is required.

 

APMGR_CWS_LOCAL_AC_DOWN

Message text

CAPWAP tunnel to local AC [STRING] went down. Reason: [STRING].

Variable fields

$1: IP address of the local AC.

$2: Reason:

·          Neighbor dead timer expired.

·          Local AC was deleted.

·          Serial number changed.

·          Processed join request in Run state.

·          Failed to retransmit message.

·          N/A

Severity level

4

Example

APMGR/4/APMGR_CWS_LOCAL_AC_DOWN: CAPWAP tunnel to local AC 1.1.1.1 went down. Reason: Serial number changed.

Explanation

The CAPWAP tunnel between the central AC and the local AC was terminated for a specific reason.

Recommended action

To resolve the issue:

9.      Examine the network connection between the central AC and the local AC.

10.   Verify that the central AC is correctly configured.

11.   Verify that the local AC is correctly configured.

12.   If the issue persists, contact H3C Support.

 

APMGR_CWS_LOCAL_AC_UP

Message text

CAPWAP tunnel to local AC [STRING] went up.

Variable fields

$1: IP address of the local AC.

Severity level

6

Example

APMGR/6/APMGR_CWS_LOCAL_AC_UP: CAPWAP tunnel to local AC 1.1.1.1 went up.

Explanation

The central AC has established a CAPWAP tunnel with the local AC.

Recommended action

No action is required.

 

APMGR_CWS_RUN_DOWNLOAD_COMPLETE

Message text

File [STRING] successfully downloaded through the CAPWAP tunnel for AP [STRING].

Variable fields

$1: File name.

$2: AP name.

Severity level

6

Example

APMGR/6/APMGR_CWS_RUN_DOWNLOAD_COMPLETE: File ac.cfg successfully downloaded through the CAPWAP tunnel for AP ap2.

Explanation

The AP downloaded the file from the AC successfully.

Recommended action

No action is required.

 

APMGR_CWS_RUN_DOWNLOAD_START

Message text

AP [STRING] started to download the file [STRING].

Variable fields

$1: AP name.

$2: File name.

Severity level

6

Example

APMGR/6/APMGR_CWS_RUN_DOWNLOAD_START: AP ap1 started to download the file ac.cfg.

Explanation

The AP started to download the file from the AC.

Recommended action

No action is required.

 

APMGR_CWS_TUNNEL_DOWN

Message text

CAPWAP tunnel to AP [STRING] went down. Reason: [STRING].

Variable fields

$1: AP name.

$2: Reason:

·          Neighbor dead timer expired.

·          AP was reset.

·          AP was deleted.

·          Serial number changed.

·          Processed join request in Run state.

·          Failed to retransmit message.

·          Received WTP tunnel down event from AP.

·          Backup AC closed the backup tunnel.

·          Tunnel switched.

·          N/A.

Severity level

6

Example

APMGR/6/APMGR_CWS_TUNNEL_DOWN: CAPWAP tunnel to AP ap1 went down. Reason: AP was reset.

Explanation

The AP went offline for a specific reason.

Recommended action

To resolve the issue:

13.   Examine the network connection between the AP and the AC.

14.   Verify that the AP is correctly configured.

15.   Verify that the AC is correctly configured.

16.   If the issue persists, contact H3C Support.

 

APMGR_CWS_TUNNEL_UP

Message text

[STRING] CAPWAP tunnel to AP [STRING] went up.

Variable fields

$1: Tunnel type:

·          Master.

·          Backup.

$2: AP name.

Severity level

6

Example

APMGR/6/APMGR_CWS_TUNNEL_UP: Backup CAPWAP tunnel to AP ap1 went up.

Explanation

The AP came online and entered Run state.

Recommended action

No action is required.

 

APMGR_DELBAC_INFO

Message text

Delete BAS AC [STRING].

Variable fields

$1: MAC address of the BAS AC.

Severity level

6

Example

APMGR/6/APMGR_DELBAC_INFO: Delete BAS AC 3ce5-a616-28cd.

Explanation

The BAS AC was disconnected from the master AC.

Recommended action

No action is required.

 

APMGR_LOCAL_AC_OFFLINE

Message text

Local AC [STRING] went offline. State changed to Idle.

Variable fields

$1: Name of the local AC.

Severity level

6

Example

APMGR/6/APMGR_LOCAL_AC_OFFLINE: Local AC ac1 went offline. State changed to Idle.

Explanation

The local AC went offline. The state of the local AC changed to Idle.

Recommended action

1.      If the local AC went offline abnormally, check the debugging information to locate the issue and resolve it.

2.      If the issue persists, contact H3C Support.

 

APMGR_LOCAL_AC_ONLINE

Message text

Local AC [STRING] went online. State changed to Run.

Variable fields

$1: Name of the local AC.

Severity level

6

Example

APMGR/6/APMGR_LOCAL_AC_ONLINE: Local AC ac1 went online. State changed to Run.

Explanation

The local AC came online. The state of the local AC changed to Run.

Recommended action

No action is required.

 

 

 

ARP messages

This section contains ARP messages.

ARP_ACTIVE_ACK_NO_REPLY

Message text

No ARP reply from IP [STRING] was received on interface [STRING].

Variable fields

$1: IP address.

$2: Interface name.

Severity level

6

Example

ARP/6/ARP_ACTIVE_ACK_NO_REPLY: No ARP reply from IP 192.168.10.1 was received on interface GigabitEthernet1/0/1.

Explanation

The ARP active acknowledgement feature did not receive an ARP reply after it sent an ARP request to the sender IP of an ARP message.

This message indicates the risk of attacks.

Recommended action

1.      Verify that the learned ARP entries on the device are consistent with the existing legal devices. When gateways and servers are on the network, check the ARP entries for these devices first.

2.      If the ARP entries are correct and the attack continues, contact H3C Support.

 

ARP_ACTIVE_ACK_NOREQUESTED_REPLY

Message text

Interface [STRING] received from IP [STRING] an ARP reply that was not requested by the device.

Variable fields

$1: Interface name.

$2: IP address.

Severity level

6

Example

ARP/6/ARP_ACTIVE_ACK_NOREQUESTED_REPLY: Interface GigabitEthernet1/0/1 received from IP 192.168.10.1 an ARP reply that was not requested by the device.

Explanation

The ARP active acknowledgement feature received an unsolicited ARP reply from a sender IP.

This message indicates the risk of attacks.

Recommended action

No action is required. The device discards the ARP reply automatically.

 

ARP_BINDRULETOHW_FAILED

Message text

Failed to download binding rule to hardware on the interface [STRING], SrcIP [IPADDR], SrcMAC [MAC], VLAN [UINT16], Gateway MAC [MAC].

Variable fields

$1: Interface name.

$2: Source IP address.

$3: Source MAC address.

$4: VLAN ID.

$5: Gateway MAC address.

Severity level

5

Example

ARP/5/ARP_BINDRULETOHW_FAILED: Failed to download binding rule to hardware on the interface GigabitEthernet1/0/1, SrcIP 1.1.1.132, SrcMAC 0015-E944-A947, VLAN 1, Gateway MAC 00A1-B812-1108.

Explanation

The system failed to set a binding rule to the hardware on an interface. The message is sent in any of the following situations:

·          The resources are not sufficient for the operation.

·          The memory is not sufficient for the operation.

·          A hardware error occurs.

Recommended action

To resolve the problem:

3.      Execute the display qos-acl resource command to check if the ACL resources for the operation are sufficient.

¡  If yes, proceed to step 2.

¡  If no, delete unnecessary configuration to release ACL resources. If no configuration can be deleted, proceed to step 2.

4.      Execute the display memory command to check if the memory for the operation is sufficient.

¡  If yes, proceed to step 3.

¡  If no, delete unnecessary configuration to release memory. If no configuration can be deleted, proceed to step 3.

5.      Delete the configuration and perform the operation again.

 

ARP_DETECTION_LOG

Message text

Detected an ARP attack on interface [STRING]: IP [STRING], MAC [STRING], VLAN [STRING]. [UINT32] packet(s) dropped.

Variable fields

$1: Interface name.

$2: IP address.

$3: MAC address.

$4: VLAN ID.

$5: Number of dropped packets.

Severity level

5

Example

ARP/5/ARP_INSPECTION: -MDC=1; Detected an ARP attack on interface GigabitEthernet1/0/1: IP 1.1.1.1, MAC 1-1-1, VLAN 100. 2 packet(s) dropped.

Explanation

An ARP attack was detected on an interface and attack packets were dropped.

Recommended action

Check the source of the ARP attack.

 

ARP_DUPLICATE_IPADDR_DETECT

Message text

Detected an IP address conflict. The device with MAC address [STRING] connected to interface [STRING] in VSI [STRING] and the device with MAC address [STRING] connected to interface [STRING] in VSI [STRING] were using the same IP address [IPADDR].

Variable fields

$1: MAC address.

$2: Interface name. (The interface can be a tunnel interface, Layer 3 interface, or Ethernet service instance.)

$3: VSI name.

$4: MAC address.

$5: Interface name. (The interface can be a tunnel interface, Layer 3 interface, or Ethernet service instance.)

$6: VSI name.

$7: Conflicting IP address.

Severity level

4

Example

ARP/4/ARP_DUPLICATE_IPADDR_DETECT: Detected an IP address conflict. The device with MAC address 00-00-01 connected to interface GigabitEthernet1/0/1 service-instance 1000 in VSI vpna and the device with MAC address 00-00-02 connected to interface tunnel 10 in VSI vpna were using the same IP address 192.168.1.1.

Explanation

This message is sent when an interface receives an ARP message in which the sender information conflicts with an existing ARP entry. The sender IP address is the same as the IP address in the entry, but the MAC addresses are different.

Recommended action

Change the IP address on either of the two devices.

 

ARP_DYNAMIC

Message text

The maximum number of dynamic ARP entries for the device reached.

Variable fields

N/A

Severity level

6

Example

ARP/6/ARP_DYNAMIC: The maximum number of dynamic ARP entries for the device reached.

Explanation

The maximum number of dynamic ARP entries for the device was reached.

Recommended action

No action is required.

 

ARP_DYNAMIC_IF

Message text

The maximum number of dynamic ARP entries for interface [STRING] reached.

Variable fields

$1: Interface name.

Severity level

6

Example

ARP/6/ARP_DYNAMIC_IF: The maximum number of dynamic ARP entries for interface GigabitEthernet1/0/1 reached.

Explanation

The maximum number of dynamic ARP entries for the specified interface was reached.

Recommended action

No action is required.

 

ARP_DYNAMIC_SLOT

Message text

Pattern 1:

The maximum number of dynamic ARP entries for slot [INT32] reached.

Pattern 2:

The maximum number of dynamic ARP entries for chassis [INT32] slot [INT32] reached.

Variable fields

Pattern 1:

$1: Slot number.

Pattern 2:

$1: Chassis number.

$2: Slot number.

Severity level

6

Example

ARP/6/ARP_DYNAMIC_SLOT: The maximum number of dynamic ARP entries for slot 2 reached.

Explanation

Pattern 1:

The maximum number of dynamic ARP entries for the slot was reached.

Pattern 2:

The maximum number of dynamic ARP entries for the slot on the chassis was reached.

Recommended action

No action is required.

 

ARP_ENTRY_CONFLICT

Message text

The software entry for [STRING] on [STRING] and the hardware entry did not have the same [STRING].

Variable fields

$1: IP address.

$2: VPN instance name. If the ARP entry belongs to the public network, this field displays the public network.

$3: Inconsistent items:

¡  MAC address.

¡  output interface.

¡  output port.

¡  outermost layer VLAN ID.

¡  second outermost layer VLAN ID.

¡  VSI index.

¡  link ID.

Severity level

6

Example

ARP/6/ARP_ENTRY_CONFLICT: The software entry for 1.1.1.1 on the VPN a and the hardware entry did not have the same MAC address, output port, VSI index, and link ID.

ARP/6/ARP_ENTRY_CONFLICT: The software entry for 1.1.1.2 on the public  network and the hardware entry did not have the same MAC address, output port, VSI index, and link ID.

Explanation

The software entry for the specified IP address is not the same as the hardware entry. For example, they do not have the same output interface.

Recommended action

No action is required. ARP automatically refreshes the hardware entries.

 

ARP_HOST_IP_CONFLICT

Message text

The host [STRING] connected to interface [STRING] cannot communicate correctly, because it uses the same IP address as the host connected to interface [STRING].

Variable fields

$1: IP address.

$2: Interface name.

$3: Interface name.

Severity level

4

Example

ARP/4/ARP_HOST_IP_CONFLICT: The host 1.1.1.1 connected to interface GigabitEthernet1/0/1 cannot communicate correctly, because it uses the same IP address as the host connected to interface GigabitEthernet1/0/2.

Explanation

The sender IP address in a received ARP message conflicted with the IP address of a host connected to another interface.

Recommended action

Check whether the hosts that send the ARP messages are legitimate. Disconnect the illegal host from the network.

 

ARP_LOCALPROXY_ENABLE_FAILED

Message text

Failed to enable local proxy ARP on interface [STRING].

Variable fields

$1: Interface name.

Severity level

4

Example

ARP/4/ARP_LOCALPROXY_ENABLE_FAILED: -MDC=1-Slot=2; Failed to enable local proxy ARP on interface VSI-interface 1.

Explanation

This message is sent when the device fails to enable local proxy ARP on an interface in a slot. If the interface resides on the MPU, the slot number is 0.

Recommended action

1.      Verify that the card supports local proxy ARP.

2.      Verify that sufficient hardware resources are available.

 

ARP_RATE_EXCEEDED

Message text

The ARP packet rate ([UINT32] pps) exceeded the rate limit ([UINT32] pps) on interface [STRING] in the last [UINT32] seconds.

Variable fields

$1: ARP packet rate.

$2: ARP limit rate.

$3: Interface name.

$4: Interval time.

Severity level

4

Example

ARP/4/ARP_RATE_EXCEEDED: The ARP packet rate (100 pps) exceeded the rate limit (80 pps) on interface GigabitEthernet1/0/1 in the last 10 seconds.

Explanation

An interface received ARP messages at a higher rate than the rate limit.

Recommended action

Verify that the hosts at the sender IP addresses are legitimate.

 

ARP_RATELIMIT_NOTSUPPORT

Message text

Pattern 1:

ARP packet rate limit is not support on slot [INT32].

Pattern 2:

ARP packet rate limit is not support on chassis [INT32] slot [INT32].

Variable fields

Pattern 1:

$1: Slot number.

Pattern 2:

$1: Chassis number.

$2: Slot number.

Severity level

6

Example

ARP/6/ARP_RATELIMIT_NOTSUPPORT: ARP packet rate limit is not support on slot 2.

Explanation

Pattern 1:

ARP packet rate limit is not supported on the slot.

Pattern 2:

ARP packet rate limit is not supported on the slot of the chassis was reached.

Recommended action

Verify that the host at the sender IP address is legitimate.

 

ARP_SENDER_IP_INVALID

Message text

Sender IP [STRING] was not on the same network as the receiving interface [STRING].

Variable fields

$1: IP address.

$2: Interface name.

Severity level

6

Example

ARP/6/ARP_SENDER_IP_INVALID: Sender IP 192.168.10.2 was not on the same network as the receiving interface GigabitEthernet1/0/1.

Explanation

The sender IP of a received ARP message was not on the same network as the receiving interface.

Recommended action

Verify that the host at the sender IP address is legitimate.

 

ARP_SENDER_MAC_INVALID

Message text

Sender MAC [STRING] was not identical to Ethernet source MAC [STRING] on interface [STRING].

Variable fields

$1: MAC address.

$2: MAC address.

$3: Interface name.

Severity level

6

Example

ARP/6/ARP_SENDER_MAC_INVALID: Sender MAC 0000-5E14-0E00 was not identical to Ethernet source MAC 0000-5C14-0E00 on interface GigabitEthernet1/0/1.

Explanation

An interface received an ARP message. The sender MAC address in the message body was not identical to the source MAC address in the Ethernet header.

Recommended action

Verify that the host at the sender MAC address is legitimate.

 

ARP_SENDER_SMACCONFLICT

Message text

Packet was discarded because its sender MAC address was the MAC address of the receiving interface.

Interface: [STRING], sender IP: [STRING], target IP: [STRING].

Variable fields

$1: Interface name.

$2: Sender IP address.

$3: Target IP address.

Severity level

6

Example

ARP/6/ ARP_SENDER_SMACCONFLICT: Packet discarded for the sender MAC address is the same as the receiving interface.

Interface: GigabitEthernet1/0/1 sender IP: 1.1.2.2 target IP: 1.1.2.1,

Explanation

The sender MAC address of a received ARP packet conflicts with the MAC address of the device.

Recommended action

No action is required.

 

ARP_SENDER_SMACCONFLICT_VSI

Message text

Packet was discarded because its sender MAC address was the MAC address of the receiving interface.

Interface: [STRING], sender IP: [STRING], target IP: [STRING],VSI index: [UINT32], link ID: [UINT32].

Variable fields

$1: Interface name.

$2: Sender IP address.

$3: Target IP address.

$4: VSI index.

$5: Link ID.

Severity level

6

Example

ARP/6/ ARP_SENDER_SMACCONFLICT_VSI: Packet discarded for the sender MAC address is the same as the receiving interface.

Interface: VSI3 sender IP: 1.1.2.2 target IP: 1.1.2.1, VSI Index: 2, Link ID: 0

Explanation

The sender MAC address of a received ARP packet conflicts with the MAC address of the device. The receiving interface is a VSI interface.

Recommended action

No action is required.

 

ARP_SRC_MAC_FOUND_ATTACK

Message text

An attack from MAC [STRING] was detected on interface [STRING].

Variable fields

$1: MAC address.

$2: Interface name.

Severity level

6

Example

ARP/6/ARP_SRC_MAC_FOUND_ATTACK: An attack from MAC 0000-5E14-0E00 was detected on interface GigabitEthernet1/0/1.

Explanation

The source MAC-based ARP attack detection feature received more ARP packets from the same MAC address within 5 seconds than the specified threshold.

This message indicates the risk of attacks.

Recommended action

Verify that the host at the source MAC address is legitimate.

 

ARP_SUP_ENABLE_FAILED

Message text

Failed to enable ARP flood suppression on VSI [STRING].

Variable fields

$1: VSI name.

Severity level

4

Example

ARP/4/ARP_SUP_ENABLE_FAILED: -MDC=1; Failed to enable ARP flood suppression on VSI vpna.

Explanation

This message is sent when the system failed to enable ARP flood suppression for a VSI. The minimum interval between two log messages is 2 seconds. To make the system send the message successfully, wait for a minimum of 2 seconds before you enable ARP flood suppression for another VSI.

Recommended action

1.      Verify that the device supports ARP flood suppression.

2.      Verify that the hardware resources are sufficient.

 

ARP_TARGET_IP_INVALID

Message text

Target IP [STRING] was not the IP of the receiving interface [STRING].

Variable fields

$1: IP address.

$2: Interface name.

Severity level

6

Example

ARP/6/ARP_TARGET_IP_INVALID: Target IP 192.168.10.2 was not the IP of the receiving interface GigabitEthernet1/0/1.

Explanation

The target IP address of a received ARP message was not the IP address of the receiving interface.

Recommended action

Verify that the host at the sender IP address is legitimate.

 

ARP_THRESHOLD_REACHED

Message text

The alarm threshold for dynamic ARP entry learning was reached on interface [STRING].

Variable fields

$1: Interface name.

Severity level

4

Example

ARP/4/ARP_THRESHOLD_REACHED: The alarm threshold for dynamic ARP entry learning was reached on interface GigabitEthernet1/0/1.

Explanation

This message is sent when the alarm threshold for dynamic ARP learning was reached on GigabitEthernet 1/0/1.

Recommended action

Verify that the number of learned dynamic ARP entries matches the actual number of devices in the network and no ARP attack sources exist in the network.

 

ARP_USER_DUPLICATE_IPADDR_DETECT

Message text

Detected a user IP address conflict. New user (MAC [STRING], SVLAN [STRING], CVLAN [STRING]) on interface [STRING] and old user (MAC [STRING], SVLAN [STRING], CVLAN [STRING]) on interface [STRING] were using the same IP address [IPADDR].

Variable fields

$1: MAC address of a new user.

$2: Outer VLAN to which the new user belongs.

$3: Inner VLAN to which the new user belongs.

$4: Name of the interface connecting to the new user.

$5: MAC address of an old user.

$6: Outer VLAN to which the old user belongs.

$7: Inner VLAN to which the old user belongs.

$8: Name of the interface connecting to the old user.

$9: IP address.

Severity level

6

Example

ARP/6/ARP_USER_DUPLICATE_IPADDR_DETECT: Detected a user IP address conflict. New user (MAC 0010-2100-01e1, SVLAN 100, CVLAN 10) on interface GigabitEthernet1/0/1 and old user (MAC 0120-1e00-0102, SVLAN 100, CVLAN 10) on interface GigabitEthernet1/0/1 were using the same IP address 192.168.1.1.

Explanation

ARP detected a user IP address conflict. The IP address of a new user is the same as the IP address of an old user.

Recommended action

Verify that all users have different IP addresses.

 

ARP_USER_MOVE_DETECT

Message text

Detected a user (IP address [IPADDR], MAC address [STRING]) moved to another interface. Before user move: interface [STRING], SVLAN [STRING], CVLAN [STRING]. After user move: interface [STRING], SVLAN [STRING], CVLAN [STRING].

Variable fields

$1: IP address of the user.

$2: MAC address of the user.

$3: Interface name before the migration.

$4: Outer VLAN to which the user belongs before the migration.

$5: Inner VLAN to which the user belongs before the migration.

$6: Interface name after the migration.

$7: Outer VLAN to which the user belongs after the migration.

$8: Inner VLAN to which the user belongs after the migration.

Severity level

6

Example

ARP/6/ARP_USER_MOVE_DETECT: Detected a user (IP address 192.168.1.1, MAC address 0010-2100-01e1) moved to another interface. Before user move: interface GigabitEthernet1/0/1, SVLAN 100, CVLAN 10. After user move: interface GigabitEthernet1/0/2, SVLAN 100, CVLAN 10.

Explanation

ARP detected a user accesses the network through another port.

Recommended action

Use the display arp user-move record command to verify that the migration is legitimate.

 

DUPIFIP

Message text

Duplicate address [STRING] on interface [STRING], sourced from [STRING].

Variable fields

$1: IP address.

$2: Interface name.

$3: MAC Address.

Severity level

6

Example

ARP/6/DUPIFIP: Duplicate address 1.1.1.1 on interface GigabitEthernet1/0/1, sourced from 0015-E944-A947.

Explanation

ARP detected a duplicate address.

The sender IP in the received ARP packet was being used by the receiving interface.

Recommended action

Modify the IP address configuration.

 

DUPIP

Message text

IP address [STRING] conflicted with global or imported IP address, sourced from [STRING].

Variable fields

$1: IP address.

$2: MAC Address.

Severity level

6

Example

ARP/6/DUPIP: IP address 30.1.1.1 conflicted with global or imported IP address, sourced from 0000-0000-0001.

Explanation

The sender IP address of the received ARP packet conflicted with the global or imported IP address.

Recommended action

Modify the IP address configuration.

 

DUPVRRPIP

Message text

IP address [STRING] conflicted with VRRP virtual IP address on interface [STRING], sourced from [STRING].

Variable fields

$1: IP address.

$2: Interface name.

$3: MAC address.

Severity level

6

Example

ARP/6/DUPVRRPIP: IP address 1.1.1.1 conflicted with VRRP virtual IP address on interface GigabitEthernet1/0/1, sourced from 0015-E944-A947.

Explanation

The sender IP address of the received ARP packet conflicted with the VRRP virtual IP address.

Recommended action

Modify the IP address configuration.

 

 

ATK messages

This section contains attack detection and prevention messages.

ATK_ICMP_ADDRMASK_REQ

Message text

IcmpType(1058)=[UINT32]; RcvIfName(1023)=[STRING]; SrcIPAddr(1003)=[IPADDR]; DSLiteTunnelPeer(1040)=[STRING]; DstIPAddr(1007)=[IPADDR]; RcvVPNInstance(1041)=[STRING]; Action(1049)=[STRING]; BeginTime_c(1011)=[STRING]; EndTime_c(1012)=[STRING]; AtkTimes(1050)=[UINT32].

Variable fields

$1: ICMP message type.

$2: Receiving interface name.

$3: Source IP address.

$4: IP address of the peer DS-Lite tunnel interface.

$5: Destination IP address.

$6: Name of the receiving VPN instance.

$7: Actions against the attack.

$8: Start time of the attack.

$9: End time of the attack.

$10: Attack times.

Severity level

5

Example

ATK/5/ATK_ICMP_ADDRMASK_REQ: IcmpType(1058)=17; RcvIfName(1023)=Ethernet0/0/2; SrcIPAddr(1003)=9.1.1.1; DSLiteTunnelPeer(1040)=--; DstIPAddr(1007)=6.1.1.1; RcvVPNInstance(1041)=--; Action(1049)=logging; BeginTime_c(1011)=20131011091319; EndTime_c(1012)=20131011091819; AtkTimes(1050)=2.

Explanation

This message is sent when ICMP address mask request logs are aggregated.

Recommended action

No action is required.

 

ATK_ICMP_ADDRMASK_REQ_RAW

Message text

IcmpType(1058)=[UINT32]; RcvIfName(1023)=[STRING]; SrcIPAddr(1003)=[IPADDR]; DSLiteTunnelPeer(1040)=[STRING]; DstIPAddr(1007)=[IPADDR]; RcvVPNInstance(1041)=[STRING]; Action(1049)=[STRING].

Variable fields

$1: ICMP message type.

$2: Receiving interface name.

$3: Source IP address.

$4: IP address of the peer DS-Lite tunnel interface.

$5: Destination IP address.

$6: Name of the receiving VPN instance.

$7: Actions against the attack.

Severity level

5

Example

ATK/5/ATK_ICMP_ADDRMASK_REQ_RAW: IcmpType(1058)=17; RcvIfName(1023)=Ethernet0/0/2; SrcIPAddr(1003)=9.1.1.1; DSLiteTunnelPeer(1040)=--; DstIPAddr(1007)=6.1.1.1; RcvVPNInstance(1041)=--; Action(1049)=logging.

Explanation

If log aggregation is enabled, for ICMP address mask requests of the same attributes, this message is sent only when the first request is received.

If log aggregation is disabled, this message is sent every time an ICMP address mask request is received.

Recommended action

No action is required.

 

ATK_ICMP_ADDRMASK_REQ_RAW_SZ

Message text

IcmpType(1058)=[UINT32]; SrcZoneName(1025)=[STRING]; SrcIPAddr(1003)=[IPADDR]; DSLiteTunnelPeer(1040)=[STRING]; DstIPAddr(1007)=[IPADDR]; RcvVPNInstance(1041)=[STRING]; Action(1049)=[STRING].

Variable fields

$1: ICMP message type.

$2: Source security zone name.

$3: Source IP address.

$4: IP address of the peer DS-Lite tunnel interface.

$5: Destination IP address.

$6: Name of the receiving VPN instance.

$7: Actions against the attack.

Severity level

5

Example

ATK/5/ATK_ICMP_ADDRMASK_REQ_RAW_SZ: IcmpType(1058)=17; SrcZoneName(1025)=Trust; SrcIPAddr(1003)=9.1.1.1; DSLiteTunnelPeer(1040)=--; DstIPAddr(1007)=6.1.1.1; RcvVPNInstance(1041)=--; Action(1049)=logging.

Explanation

If log aggregation is enabled, for ICMP address mask requests of the same attributes, this message is sent only when the first request is received.

If log aggregation is disabled, this message is sent every time an ICMP address mask request is received.

Recommended action

No action is required.

 

ATK_ICMP_ADDRMASK_REQ_SZ

Message text

IcmpType(1058)=[UINT32]; SrcZoneName(1025)=[STRING]; SrcIPAddr(1003)=[IPADDR]; DSLiteTunnelPeer(1040)=[STRING]; DstIPAddr(1007)=[IPADDR]; RcvVPNInstance(1041)=[STRING]; Action(1049)=[STRING]; BeginTime_c(1011)=[STRING]; EndTime_c(1012)=[STRING]; AtkTimes(1050)=[UINT32].

Variable fields

$1: ICMP message type.

$2: Source security zone name.

$3: Source IP address.

$4: IP address of the peer DS-Lite tunnel interface.

$5: Destination IP address.

$6: Name of the receiving VPN instance.

$7: Actions against the attack.

$8: Start time of the attack.

$9: End time of the attack.

$10: Attack times.

Severity level

5

Example

ATK/5/ATK_ICMP_ADDRMASK_REQ_SZ: IcmpType(1058)=17; SrcZoneName(1025)=Trust; SrcIPAddr(1003)=9.1.1.1; DSLiteTunnelPeer(1040)=--; DstIPAddr(1007)=6.1.1.1; RcvVPNInstance(1041)=--; Action(1049)=logging; BeginTime_c(1011)=20131011091319; EndTime_c(1012)=20131011091819; AtkTimes(1050)=2.

Explanation

This message is sent when ICMP address mask request logs are aggregated.

Recommended action

No action is required.

 

ATK_ICMP_ADDRMASK_RPL

Message text

IcmpType(1058)=[UINT32]; RcvIfName(1023)=[STRING]; SrcIPAddr(1003)=[IPADDR]; DSLiteTunnelPeer(1040)=[STRING]; DstIPAddr(1007)=[IPADDR]; RcvVPNInstance(1041)=[STRING]; Action(1049)=[STRING]; BeginTime_c(1011)=[STRING]; EndTime_c(1012)=[STRING]; AtkTimes(1050)=[UINT32].

Variable fields

$1: ICMP message type.

$2: Receiving interface name.

$3: Source IP address.

$4: IP address of the peer DS-Lite tunnel interface.

$5: Destination IP address.

$6: Name of the receiving VPN instance.

$7: Actions against the attack.

$8: Start time of the attack.

$9: End time of the attack.

$10: Attack times.

Severity level

5

Example

ATK/5/ATK_ICMP_ADDRMASK_RPL: IcmpType(1058)=18; RcvIfName(1023)=Ethernet0/0/2; SrcIPAddr(1003)=9.1.1.1; DSLiteTunnelPeer(1040)=--; DstIPAddr(1007)=6.1.1.1; RcvVPNInstance(1041)=--; Action(1049)=logging; BeginTime_c(1011)=20131011091319; EndTime_c(1012)=20131011091819; AtkTimes(1050)=2.

Explanation

This message is sent when ICMP address mask reply logs are aggregated.

Recommended action

No action is required.

 

ATK_ICMP_ADDRMASK_RPL_RAW

Message text

IcmpType(1058)=[UINT32]; RcvIfName(1023)=[STRING]; SrcIPAddr(1003)=[IPADDR]; DSLiteTunnelPeer(1040)=[STRING]; DstIPAddr(1007)=[IPADDR]; RcvVPNInstance(1041)=[STRING]; Action(1049)=[STRING].

Variable fields

$1: ICMP message type.

$2: Receiving interface name.

$3: Source IP address.

$4: IP address of the peer DS-Lite tunnel interface.

$5: Destination IP address.

$6: Name of the receiving VPN instance.

$7: Actions against the attack.

Severity level

5

Example

ATK/5/ATK_ICMP_ADDRMASK_RPL_RAW: IcmpType(1058)=18; RcvIfName(1023)=Ethernet0/0/2; SrcIPAddr(1003)=9.1.1.1; DSLiteTunnelPeer(1040)=--; DstIPAddr(1007)=6.1.1.1; RcvVPNInstance(1041)=--; Action(1049)=logging.

Explanation

If log aggregation is enabled, for ICMP address mask replies of the same attributes, this message is sent only when the first reply is received.

If log aggregation is disabled, this message is sent every time an ICMP address mask reply is received.

Recommended action

No action is required.

 

ATK_ICMP_ADDRMASK_RPL_RAW_SZ

Message text

IcmpType(1058)=[UINT32]; SrcZoneName(1025)=[STRING]; SrcIPAddr(1003)=[IPADDR]; DSLiteTunnelPeer(1040)=[STRING]; DstIPAddr(1007)=[IPADDR]; RcvVPNInstance(1041)=[STRING]; Action(1049)=[STRING].

Variable fields

$1: ICMP message type.

$2: Source security zone name.

$3: Source IP address.

$4: IP address of the peer DS-Lite tunnel interface.

$5: Destination IP address.

$6: Name of the receiving VPN instance.

$7: Actions against the attack.

Severity level

5

Example

ATK/5/ATK_ICMP_ADDRMASK_RPL_RAW_SZ: IcmpType(1058)=18; SrcZoneName(1025)=Trust; SrcIPAddr(1003)=9.1.1.1; DSLiteTunnelPeer(1040)=--; DstIPAddr(1007)=6.1.1.1; RcvVPNInstance(1041)=--; Action(1049)=logging.

Explanation

If log aggregation is enabled, for ICMP address mask replies of the same attributes, this message is sent only when the first reply is received.

If log aggregation is disabled, this message is sent every time an ICMP address mask reply is received.

Recommended action

No action is required.

 

ATK_ICMP_ADDRMASK_RPL_SZ

Message text

IcmpType(1058)=[UINT32]; SrcZoneName(1025)=[STRING]; SrcIPAddr(1003)=[IPADDR]; DSLiteTunnelPeer(1040)=[STRING]; DstIPAddr(1007)=[IPADDR]; RcvVPNInstance(1041)=[STRING]; Action(1049)=[STRING]; BeginTime_c(1011)=[STRING]; EndTime_c(1012)=[STRING]; AtkTimes(1050)=[UINT32].

Variable fields

$1: ICMP message type.

$2: Source security zone name.

$3: Source IP address.

$4: IP address of the peer DS-Lite tunnel interface.

$5: Destination IP address.

$6: Name of the receiving VPN instance.

$7: Actions against the attack.

$8: Start time of the attack.

$9: End time of the attack.

$10: Attack times.

Severity level

5

Example

ATK/5/ATK_ICMP_ADDRMASK_RPL_SZ: IcmpType(1058)=18; SrcZoneName(1025)=Trust; SrcIPAddr(1003)=9.1.1.1; DSLiteTunnelPeer(1040)=--; DstIPAddr(1007)=6.1.1.1; RcvVPNInstance(1041)=--; Action(1049)=logging; BeginTime_c(1011)=20131011091319; EndTime_c(1012)=20131011091819; AtkTimes(1050)=2.

Explanation

This message is sent when ICMP address mask reply logs are aggregated.

Recommended action

No action is required.

 

ATK_ICMP_ECHO_REQ

Message text

IcmpType(1058)=[UINT32]; RcvIfName(1023)=[STRING]; SrcIPAddr(1003)=[IPADDR]; DSLiteTunnelPeer(1040)=[STRING]; DstIPAddr(1007)=[IPADDR]; RcvVPNInstance(1041)=[STRING]; Action(1049)=[STRING]; BeginTime_c(1011)=[STRING]; EndTime_c(1012)=[STRING]; AtkTimes(1050)=[UINT32].

Variable fields

$1: ICMP message type.

$2: Receiving interface name.

$3: Source IP address.

$4: IP address of the peer DS-Lite tunnel interface.

$5: Destination IP address.

$6: Name of the receiving VPN instance.

$7: Actions against the attack.

$8: Start time of the attack.

$9: End time of the attack.

$10: Attack times.

Severity level

5

Example

ATK/5/ATK_ICMP_ECHO_REQ: IcmpType(1058)=8; RcvIfName(1023)=Ethernet0/0/2; SrcIPAddr(1003)=9.1.1.1; DSLiteTunnelPeer(1040)=--; DstIPAddr(1007)=6.1.1.1; RcvVPNInstance(1041)=--; Action(1049)=logging; BeginTime_c(1011)=20131011091319; EndTime_c(1012)=20131011091819; AtkTimes(1050)=2.

Explanation

This message is sent when ICMP echo request logs are aggregated.

Recommended action

No action is required.

 

ATK_ICMP_ECHO_REQ_RAW

Message text

IcmpType(1058)=[UINT32]; RcvIfName(1023)=[STRING]; SrcIPAddr(1003)=[IPADDR]; DSLiteTunnelPeer(1040)=[STRING]; DstIPAddr(1007)=[IPADDR]; DstPort(1004)=[UINT16]; RcvVPNInstance(1041)=[STRING]; Action(1049)=[STRING].

Variable fields

$1: ICMP message type.

$2: Receiving interface name.

$3: Source IP address.

$4: IP address of the peer DS-Lite tunnel interface.

$5: Destination IP address.

$6: Destination port number.

$7: Name of the receiving VPN instance.

$8: Actions against the attack.

Severity level

5

Example

ATK/5/ATK_ICMP_ECHO_REQ_RAW: IcmpType(1058)=8; RcvIfName(1023)=Ethernet0/0/2; SrcIPAddr(1003)=9.1.1.1; DstPort(1004)=22; DSLiteTunnelPeer(1040)=--; DstIPAddr(1007)=6.1.1.1; RcvVPNInstance(1041)=--; Action(1049)=logging.

Explanation

If log aggregation is enabled, for ICMP echo requests of the same attributes, this message is sent only when the first request is received.

If log aggregation is disabled, this message is sent every time an ICMP echo request is received.

Recommended action

No action is required.

 

ATK_ICMP_ECHO_REQ_RAW_SZ

Message text

IcmpType(1058)=[UINT32]; SrcZoneName(1025)=[STRING]; SrcIPAddr(1003)=[IPADDR]; DSLiteTunnelPeer(1040)=[STRING]; DstIPAddr(1007)=[IPADDR]; DstPort(1004)=[UINT16]; RcvVPNInstance(1041)=[STRING]; Action(1049)=[STRING].

Variable fields

$1: ICMP message type.

$2: Source security zone name.

$3: Source IP address.

$4: IP address of the peer DS-Lite tunnel interface.

$5: Destination IP address.

$6: Destination port number.

$7: Name of the receiving VPN instance.

$8: Actions against the attack.

Severity level

5

Example

ATK/5/ATK_ICMP_ECHO_REQ_RAW_SZ: IcmpType(1058)=8; SrcZoneName(1025)=Trust; SrcIPAddr(1003)=9.1.1.1; DstPort(1004)=22; DSLiteTunnelPeer(1040)=--; DstIPAddr(1007)=6.1.1.1; RcvVPNInstance(1041)=--; Action(1049)=logging.

Explanation

If log aggregation is enabled, for ICMP echo requests of the same attributes, this message is sent only when the first request is received.

If log aggregation is disabled, this message is sent every time an ICMP echo request is received.

Recommended action

No action is required.

 

ATK_ICMP_ECHO_REQ_SZ

Message text

IcmpType(1058)=[UINT32]; SrcZoneName(1025)=[STRING]; SrcIPAddr(1003)=[IPADDR]; DSLiteTunnelPeer(1040)=[STRING]; DstIPAddr(1007)=[IPADDR]; RcvVPNInstance(1041)=[STRING]; Action(1049)=[STRING]; BeginTime_c(1011)=[STRING]; EndTime_c(1012)=[STRING]; AtkTimes(1050)=[UINT32].

Variable fields

$1: ICMP message type.

$2: Source security zone name.

$3: Source IP address.

$4: IP address of the peer DS-Lite tunnel interface.

$5: Destination IP address.

$6: Name of the receiving VPN instance.

$7: Actions against the attack.

$8: Start time of the attack.

$9: End time of the attack.

$10: Attack times.

Severity level

5

Example

ATK/5/ATK_ICMP_ECHO_REQ_SZ: IcmpType(1058)=8; SrcZoneName(1025)=Trust; SrcIPAddr(1003)=9.1.1.1; DSLiteTunnelPeer(1040)=--; DstIPAddr(1007)=6.1.1.1; RcvVPNInstance(1041)=--; Action(1049)=logging; BeginTime_c(1011)=20131011091319; EndTime_c(1012)=20131011091819; AtkTimes(1050)=2.

Explanation

This message is sent when ICMP echo request logs are aggregated.

Recommended action

No action is required.

 

ATK_ICMP_ECHO_RPL

Message text

IcmpType(1058)=[UINT32]; RcvIfName(1023)=[STRING]; SrcIPAddr(1003)=[IPADDR]; DSLiteTunnelPeer(1040)=[STRING]; DstIPAddr(1007)=[IPADDR]; RcvVPNInstance(1041)=[STRING]; Action(1049)=[STRING]; BeginTime_c(1011)=[STRING]; EndTime_c(1012)=[STRING]; AtkTimes(1050)=[UINT32].

Variable fields

$1: ICMP message type.

$2: Receiving interface name.

$3: Source IP address.

$4: IP address of the peer DS-Lite tunnel interface.

$5: Destination IP address.

$6: Name of the receiving VPN instance.

$7: Actions against the attack.

$8: Start time of the attack.

$9: End time of the attack.

$10: Attack times.

Severity level

5

Example

ATK/5/ATK_ICMP_ECHO_RPL: IcmpType(1058)=0; RcvIfName(1023)=Ethernet0/0/2; SrcIPAddr(1003)=9.1.1.1; DSLiteTunnelPeer(1040)=--; DstIPAddr(1007)=6.1.1.1; RcvVPNInstance(1041)=--; Action(1049)=logging; BeginTime_c(1011)=20131011091319; EndTime_c(1012)=20131011091819; AtkTimes(1050)=2.

Explanation

This message is sent when ICMP echo reply logs are aggregated.

Recommended action

No action is required.

 

ATK_ICMP_ECHO_RPL_RAW

Message text

IcmpType(1058)=[UINT32]; RcvIfName(1023)=[STRING]; SrcIPAddr(1003)=[IPADDR]; DSLiteTunnelPeer(1040)=[STRING]; DstIPAddr(1007)=[IPADDR]; RcvVPNInstance(1041)=[STRING]; Action(1049)=[STRING].

Variable fields

$1: ICMP message type.

$2: Receiving interface name.

$3: Source IP address.

$4: IP address of the peer DS-Lite tunnel interface.

$5: Destination IP address.

$6: Name of the receiving VPN instance.

$7: Actions against the attack.

Severity level

5

Example

ATK/5/ATK_ICMP_ECHO_RPL_RAW: IcmpType(1058)=0; RcvIfName(1023)=Ethernet0/0/2; SrcIPAddr(1003)=9.1.1.1; DSLiteTunnelPeer(1040)=--; DstIPAddr(1007)=6.1.1.1; RcvVPNInstance(1041)=--; Action(1049)=logging.

Explanation

If log aggregation is enabled, for ICMP echo replies of the same attributes, this message is sent only when the first reply is received.

If log aggregation is disabled, this message is sent every time an ICMP echo reply is received.

Recommended action

No action is required.

 

ATK_ICMP_ECHO_RPL_RAW_SZ

Message text

IcmpType(1058)=[UINT32]; SrcZoneName(1025)=[STRING]; SrcIPAddr(1003)=[IPADDR]; DSLiteTunnelPeer(1040)=[STRING]; DstIPAddr(1007)=[IPADDR]; RcvVPNInstance(1041)=[STRING]; Action(1049)=[STRING].

Variable fields

$1: ICMP message type.

$2: Source security zone name.

$3: Source IP address.

$4: IP address of the peer DS-Lite tunnel interface.

$5: Destination IP address.

$6: Name of the receiving VPN instance.

$7: Actions against the attack.

Severity level

5

Example

ATK/5/ATK_ICMP_ECHO_RPL_RAW_SZ: IcmpType(1058)=0; SrcZoneName(1025)=Trust; SrcIPAddr(1003)=9.1.1.1; DSLiteTunnelPeer(1040)=--; DstIPAddr(1007)=6.1.1.1; RcvVPNInstance(1041)=--; Action(1049)=logging.

Explanation

If log aggregation is enabled, for ICMP echo replies of the same attributes, this message is sent only when the first reply is received.

If log aggregation is disabled, this message is sent every time an ICMP echo reply is received.

Recommended action

No action is required.

 

ATK_ICMP_ECHO_RPL_SZ

Message text

IcmpType(1058)=[UINT32]; SrcZoneName(1025)=[STRING]; SrcIPAddr(1003)=[IPADDR]; DSLiteTunnelPeer(1040)=[STRING]; DstIPAddr(1007)=[IPADDR]; RcvVPNInstance(1041)=[STRING]; Action(1049)=[STRING]; BeginTime_c(1011)=[STRING]; EndTime_c(1012)=[STRING]; AtkTimes(1050)=[UINT32].

Variable fields

$1: ICMP message type.

$2: Source security zone name.

$3: Source IP address.

$4: IP address of the peer DS-Lite tunnel interface.

$5: Destination IP address.

$6: Name of the receiving VPN instance.

$7: Actions against the attack.

$8: Start time of the attack.

$9: End time of the attack.

$10: Attack times.

Severity level

5

Example

ATK/5/ATK_ICMP_ECHO_RPL_SZ: IcmpType(1058)=0; SrcZoneName(1025)=Trust; SrcIPAddr(1003)=9.1.1.1; DSLiteTunnelPeer(1040)=--; DstIPAddr(1007)=6.1.1.1; RcvVPNInstance(1041)=--; Action(1049)=logging; BeginTime_c(1011)=20131011091319; EndTime_c(1012)=20131011091819; AtkTimes(1050)=2.

Explanation

This message is sent when ICMP echo reply logs are aggregated.

Recommended action

No action is required.

 

ATK_ICMP_FLOOD

Message text

RcvIfName(1023)=[STRING]; DstIPAddr(1007)=[IPADDR]; DstPort(1008)=[UINT16]; RcvVPNInstance(1041)=[STRING]; UpperLimit(1048)=[UINT32]; Action(1049)=[STRING]; BeginTime_c(1011)=[STRING].

Variable fields

$1: Receiving interface name.

$2: Destination IP address.

$3: Destination port number.

$4: Name of the receiving VPN instance.

$5: Rate limit.

$6: Actions against the attack.

$7: Start time of the attack.

Severity level

3

Example

ATK/3/ATK_ICMP_FLOOD: RcvIfName(1023)=Ethernet0/0/2; DstIPAddr(1007)=6.1.1.5; DstPort(1008)=22; RcvVPNInstance(1041)=--; UpperLimit(1048)=10; Action(1049)=logging; BeginTime_c(1011)=20131009093351.

Explanation

This message is sent when the number of ICMP packets sent to a destination per second exceeds the rate limit.

Recommended action

No action is required.

 

ATK_ICMP_FLOOD_SZ

Message text

SrcZoneName(1025)=[STRING]; DstIPAddr(1007)=[IPADDR]; DstPort(1008)=[UINT16]; RcvVPNInstance(1041)=[STRING]; UpperLimit(1048)=[UINT32]; Action(1049)=[STRING]; BeginTime_c(1011)=[STRING].

Variable fields

$1: Source security zone name.

$2: Destination IP address.

$3: Destination port number.

$4: Name of the receiving VPN instance.

$5: Rate limit.

$6: Actions against the attack.

$7: Start time of the attack.

Severity level

3

Example

ATK/3/ATK_ICMP_FLOOD_SZ: SrcZoneName(1025)=Trust; DstIPAddr(1007)=6.1.1.5; DstPort(1008)=22; RcvVPNInstance(1041)=--; UpperLimit(1048)=10; Action(1049)=logging; BeginTime_c(1011)=20131009093351.

Explanation

This message is sent when the number of ICMP packets sent to a destination per second exceeds the rate limit.

Recommended action

No action is required.

 

ATK_ICMP_INFO_REQ

Message text

IcmpType(1058)=[UINT32]; RcvIfName(1023)=[STRING]; SrcIPAddr(1003)=[IPADDR]; DSLiteTunnelPeer(1040)=[STRING]; DstIPAddr(1007)=[IPADDR]; RcvVPNInstance(1041)=[STRING]; Action(1049)=[STRING]; BeginTime_c(1011)=[STRING]; EndTime_c(1012)=[STRING]; AtkTimes(1050)=[UINT32].

Variable fields

$1: ICMP message type.

$2: Receiving interface name.

$3: Source IP address.

$4: IP address of the peer DS-Lite tunnel interface.

$5: Destination IP address.

$6: Name of the receiving VPN instance.

$7: Actions against the attack.

$8: Start time of the attack.

$9: End time of the attack.

$10: Attack times.

Severity level

5

Example

ATK/5/ATK_ICMP_INFO_REQ: IcmpType(1058)=15; RcvIfName(1023)=Ethernet0/0/2; SrcIPAddr(1003)=9.1.1.1; DSLiteTunnelPeer(1040)=--; DstIPAddr(1007)=6.1.1.1; RcvVPNInstance(1041)=--; Action(1049)=logging; BeginTime_c(1011)=20131011091319; EndTime_c(1012)=20131011091819; AtkTimes(1050)=2.

Explanation

This message is sent when ICMP information request logs are aggregated.

Recommended action

No action is required.

 

ATK_ICMP_INFO_REQ_RAW

Message text

IcmpType(1058)=[UINT32]; RcvIfName(1023)=[STRING]; SrcIPAddr(1003)=[IPADDR]; DSLiteTunnelPeer(1040)=[STRING]; DstIPAddr(1007)=[IPADDR]; RcvVPNInstance(1041)=[STRING]; Action(1049)=[STRING].

Variable fields

$1: ICMP message type.

$2: Receiving interface name.

$3: Source IP address.

$4: IP address of the peer DS-Lite tunnel interface.

$5: Destination IP address.

$6: Name of the receiving VPN instance.

$7: Actions against the attack.

Severity level

5

Example

ATK/5/ATK_ICMP_INFO_REQ_RAW: IcmpType(1058)=15; RcvIfName(1023)=Ethernet0/0/2; SrcIPAddr(1003)=9.1.1.1; DSLiteTunnelPeer(1040)=--; DstIPAddr(1007)=6.1.1.1; RcvVPNInstance(1041)=--; Action(1049)=logging.

Explanation

If log aggregation is enabled, for ICMP information requests of the same attributes, this message is sent only when the first request is received.

If log aggregation is disabled, this message is sent every time an ICMP information request is received.

Recommended action

No action is required.

 

ATK_ICMP_INFO_REQ_RAW_SZ

Message text

IcmpType(1058)=[UINT32]; SrcZoneName(1025)=[STRING]; SrcIPAddr(1003)=[IPADDR]; DSLiteTunnelPeer(1040)=[STRING]; DstIPAddr(1007)=[IPADDR]; RcvVPNInstance(1041)=[STRING]; Action(1049)=[STRING].

Variable fields

$1: ICMP message type.

$2: Source security zone name.

$3: Source IP address.

$4: IP address of the peer DS-Lite tunnel interface.

$5: Destination IP address.

$6: Name of the receiving VPN instance.

$7: Actions against the attack.

Severity level

5

Example

ATK/5/ATK_ICMP_INFO_REQ_RAW_SZ: IcmpType(1058)=15; SrcZoneName(1025)=Trust; SrcIPAddr(1003)=9.1.1.1; DSLiteTunnelPeer(1040)=--; DstIPAddr(1007)=6.1.1.1; RcvVPNInstance(1041)=--; Action(1049)=logging.

Explanation

If log aggregation is enabled, for ICMP information requests of the same attributes, this message is sent only when the first request is received.

If log aggregation is disabled, this message is sent every time an ICMP information request is received.

Recommended action

No action is required.

 

ATK_ICMP_INFO_REQ_SZ

Message text

IcmpType(1058)=[UINT32]; SrcZoneName(1025)=[STRING]; SrcIPAddr(1003)=[IPADDR]; DSLiteTunnelPeer(1040)=[STRING]; DstIPAddr(1007)=[IPADDR]; RcvVPNInstance(1041)=[STRING]; Action(1049)=[STRING]; BeginTime_c(1011)=[STRING]; EndTime_c(1012)=[STRING]; AtkTimes(1050)=[UINT32].

Variable fields

$1: ICMP message type.

$2: Source security zone name.

$3: Source IP address.

$4: IP address of the peer DS-Lite tunnel interface.

$5: Destination IP address.

$6: Name of the receiving VPN instance.

$7: Actions against the attack.

$8: Start time of the attack.

$9: End time of the attack.

$10: Attack times.

Severity level

5

Example

ATK/5/ATK_ICMP_INFO_REQ_SZ: IcmpType(1058)=15; SrcZoneName(1025)=Trust; SrcIPAddr(1003)=9.1.1.1; DSLiteTunnelPeer(1040)=--; DstIPAddr(1007)=6.1.1.1; RcvVPNInstance(1041)=--; Action(1049)=logging; BeginTime_c(1011)=20131011091319; EndTime_c(1012)=20131011091819; AtkTimes(1050)=2.

Explanation

This message is sent when ICMP information request logs are aggregated.

Recommended action

No action is required.

 

ATK_ICMP_INFO_RPL

Message text

IcmpType(1058)=[UINT32]; RcvIfName(1023)=[STRING]; SrcIPAddr(1003)=[IPADDR]; DSLiteTunnelPeer(1040)=[STRING]; DstIPAddr(1007)=[IPADDR]; RcvVPNInstance(1041)=[STRING]; Action(1049)=[STRING]; BeginTime_c(1011)=[STRING]; EndTime_c(1012)=[STRING]; AtkTimes(1050)=[UINT32].

Variable fields

$1: ICMP message type.

$2: Receiving interface name.

$3: Source IP address.

$4: IP address of the peer DS-Lite tunnel interface.

$5: Destination IP address.

$6: Name of the receiving VPN instance.

$7: Actions against the attack.

$8: Start time of the attack.

$9: End time of the attack.

$10: Attack times.

Severity level

5

Example

ATK/5/ATK_ICMP_INFO_RPL: IcmpType(1058)=16; RcvIfName(1023)=Ethernet0/0/2; SrcIPAddr(1003)=9.1.1.1; DSLiteTunnelPeer(1040)=--; DstIPAddr(1007)=6.1.1.1; RcvVPNInstance(1041)=--; Action(1049)=logging; BeginTime_c(1011)=20131011091319; EndTime_c(1012)=20131011091819; AtkTimes(1050)=2.

Explanation

This message is sent when ICMP information reply logs are aggregated.

Recommended action

No action is required.

 

ATK_ICMP_INFO_RPL_RAW

Message text

IcmpType(1058)=[UINT32]; RcvIfName(1023)=[STRING]; SrcIPAddr(1003)=[IPADDR]; DSLiteTunnelPeer(1040)=[STRING]; DstIPAddr(1007)=[IPADDR]; RcvVPNInstance(1041)=[STRING]; Action(1049)=[STRING].

Variable fields

$1: ICMP message type.

$2: Receiving interface name.

$3: Source IP address.

$4: IP address of the peer DS-Lite tunnel interface.

$5: Destination IP address.

$6: Name of the receiving VPN instance.

$7: Actions against the attack.

Severity level

5

Example

ATK/5/ATK_ICMP_INFO_RPL_RAW: IcmpType(1058)=16; RcvIfName(1023)=Ethernet0/0/2; SrcIPAddr(1003)=9.1.1.1; DSLiteTunnelPeer(1040)=--; DstIPAddr(1007)=6.1.1.1; RcvVPNInstance(1041)=--; Action(1049)=logging.

Explanation

If log aggregation is enabled, for ICMP information replies of the same attributes, this message is sent only when the first reply is received.

If log aggregation is disabled, this message is sent every time an ICMP information reply is received.

Recommended action

No action is required.

 

ATK_ICMP_INFO_RPL_RAW_SZ

Message text

IcmpType(1058)=[UINT32]; SrcZoneName(1025)=[STRING]; SrcIPAddr(1003)=[IPADDR]; DSLiteTunnelPeer(1040)=[STRING]; DstIPAddr(1007)=[IPADDR]; RcvVPNInstance(1041)=[STRING]; Action(1049)=[STRING].

Variable fields

$1: ICMP message type.

$2: Source security zone name.

$3: Source IP address.

$4: IP address of the peer DS-Lite tunnel interface.

$5: Destination IP address.

$6: Name of the receiving VPN instance.

$7: Actions against the attack.

Severity level

5

Example

ATK/5/ATK_ICMP_INFO_RPL_RAW_SZ: IcmpType(1058)=16; SrcZoneName(1025)=Trust; SrcIPAddr(1003)=9.1.1.1; DSLiteTunnelPeer(1040)=--; DstIPAddr(1007)=6.1.1.1; RcvVPNInstance(1041)=--; Action(1049)=logging.

Explanation

If log aggregation is enabled, for ICMP information replies of the same attributes, this message is sent only when the first reply is received.

If log aggregation is disabled, this message is sent every time an ICMP information reply is received.

Recommended action

No action is required.

 

ATK_ICMP_INFO_RPL_SZ

Message text

IcmpType(1058)=[UINT32]; SrcZoneName(1025)=[STRING]; SrcIPAddr(1003)=[IPADDR]; DSLiteTunnelPeer(1040)=[STRING]; DstIPAddr(1007)=[IPADDR]; RcvVPNInstance(1041)=[STRING]; Action(1049)=[STRING]; BeginTime_c(1011)=[STRING]; EndTime_c(1012)=[STRING]; AtkTimes(1050)=[UINT32].

Variable fields

$1: ICMP message type.

$2: Source security zone name.

$3: Source IP address.

$4: IP address of the peer DS-Lite tunnel interface.

$5: Destination IP address.

$6: Name of the receiving VPN instance.

$7: Actions against the attack.

$8: Start time of the attack.

$9: End time of the attack.

$10: Attack times.

Severity level

5

Example

ATK/5/ATK_ICMP_INFO_RPL_SZ: IcmpType(1058)=16; SrcZoneName(1025)=Trust; SrcIPAddr(1003)=9.1.1.1; DSLiteTunnelPeer(1040)=--; DstIPAddr(1007)=6.1.1.1; RcvVPNInstance(1041)=--; Action(1049)=logging; BeginTime_c(1011)=20131011091319; EndTime_c(1012)=20131011091819; AtkTimes(1050)=2.

Explanation

This message is sent when ICMP information reply logs are aggregated.

Recommended action

No action is required.

 

ATK_ICMP_LARGE

Message text

RcvIfName(1023)=[STRING]; SrcIPAddr(1003)=[IPADDR]; DSLiteTunnelPeer(1040)=[STRING]; DstIPAddr(1007)=[IPADDR]; RcvVPNInstance(1041)=[STRING]; Action(1049)=[STRING]; BeginTime_c(1011)=[STRING]; EndTime_c(1012)=[STRING]; AtkTimes(1050)=[UINT32].

Variable fields

$1: Receiving interface name.

$2: Source IP address.

$3: IP address of the peer DS-Lite tunnel interface.

$4: Destination IP address.

$5: Name of the receiving VPN instance.

$6: Actions against the attack.

$7: Start time of the attack.

$8: End time of the attack.

$9: Attack times.

Severity level

3

Example

ATK/3/ATK_ICMP_LARGE: RcvIfName(1023)=Ethernet0/0/2; SrcIPAddr(1003)=9.1.1.1; DSLiteTunnelPeer(1040)=--; DstIPAddr(1007)=6.1.1.1; RcvVPNInstance(1041)=--; Action(1049)=logging; BeginTime_c(1011)=20131011074913; EndTime_c(1012)=20131011075413; AtkTimes(1050)=2.

Explanation

This message is sent when large ICMP packet logs are aggregated.

Recommended action

No action is required.

 

ATK_ICMP_LARGE_RAW

Message text

RcvIfName(1023)=[STRING]; SrcIPAddr(1003)=[IPADDR]; DSLiteTunnelPeer(1040)=[STRING]; DstIPAddr(1007)=[IPADDR]; RcvVPNInstance(1041)=[STRING]; Action(1049)=[STRING].

Variable fields

$1: Receiving interface name.

$2: Source IP address.

$3: IP address of the peer DS-Lite tunnel interface.

$4: Destination IP address.

$5: Name of the receiving VPN instance.

$6: Actions against the attack.

Severity level

3

Example

ATK/3/ATK_ICMP_LARGE_RAW: RcvIfName(1023)=Ethernet0/0/2; SrcIPAddr(1003)=9.1.1.1; DSLiteTunnelPeer(1040)=--; DstIPAddr(1007)=6.1.1.1; RcvVPNInstance(1041)=--; Action(1049)=logging.

Explanation

If log aggregation is enabled, for large ICMP packets of the same attributes, this message is sent only when the first packet is received.

If log aggregation is disabled, this message is sent every time a large ICMP packet is received.

Recommended action

No action is required.

 

ATK_ICMP_LARGE_RAW_SZ

Message text

SrcZoneName(1025)=[STRING]; SrcIPAddr(1003)=[IPADDR]; DSLiteTunnelPeer(1040)=[STRING]; DstIPAddr(1007)=[IPADDR]; RcvVPNInstance(1041)=[STRING]; Action(1049)=[STRING].

Variable fields

$1: Source security zone name.

$2: Source IP address.

$3: IP address of the peer DS-Lite tunnel interface.

$4: Destination IP address.

$5: Name of the receiving VPN instance.

$6: Actions against the attack.

Severity level

5

Example

ATK/5/ATK_ICMP_LARGE_RAW_SZ: SrcZoneName(1025)=Trust; SrcIPAddr(1003)=9.1.1.1; DSLiteTunnelPeer(1040)=--; DstIPAddr(1007)=6.1.1.1; RcvVPNInstance(1041)=--; Action(1049)=logging.

Explanation

If log aggregation is enabled, for large ICMP packets of the same attributes, this message is sent only when the first packet is received.

If log aggregation is disabled, this message is sent every time a large ICMP packet is received.

Recommended action

No action is required.

 

ATK_ICMP_LARGE_SZ

Message text

SrcZoneName(1025)=[STRING]; SrcIPAddr(1003)=[IPADDR]; DSLiteTunnelPeer(1040)=[STRING]; DstIPAddr(1007)=[IPADDR]; RcvVPNInstance(1041)=[STRING]; Action(1049)=[STRING]; BeginTime_c(1011)=[STRING]; EndTime_c(1012)=[STRING]; AtkTimes(1050)=[UINT32].

Variable fields

$1: Source security zone name.

$2: Source IP address.

$3: IP address of the peer DS-Lite tunnel interface.

$4: Destination IP address.

$5: Name of the receiving VPN instance.

$6: Actions against the attack.

$7: Start time of the attack.

$8: End time of the attack.

$9: Attack times.

Severity level

3

Example

ATK/3/ATK_ICMP_LARGE_SZ: SrcZoneName(1025)=Trust; SrcIPAddr(1003)=9.1.1.1; DSLiteTunnelPeer(1040)=--; DstIPAddr(1007)=6.1.1.1; RcvVPNInstance(1041)=--; Action(1049)=logging; BeginTime_c(1011)=20131011074913; EndTime_c(1012)=20131011075413; AtkTimes(1050)=2.

Explanation

This message is sent when large ICMP packet logs are aggregated.

Recommended action

No action is required.

 

ATK_ICMP_PARAPROBLEM

Message text

IcmpType(1058)=[UINT32]; RcvIfName(1023)=[STRING]; SrcIPAddr(1003)=[IPADDR]; DSLiteTunnelPeer(1040)=[STRING]; DstIPAddr(1007)=[IPADDR]; RcvVPNInstance(1041)=[STRING]; Action(1049)=[STRING]; BeginTime_c(1011)=[STRING]; EndTime_c(1012)=[STRING]; AtkTimes(1050)=[UINT32].

Variable fields

$1: ICMP message type.

$2: Receiving interface name.

$3: Source IP address.

$4: IP address of the peer DS-Lite tunnel interface.

$5: Destination IP address.

$6: Name of the receiving VPN instance.

$7: Actions against the attack.

$8: Start time of the attack.

$9: End time of the attack.

$10: Attack times.

Severity level

5

Example

ATK/5/ATK_ICMP_PARAPROBLEM: IcmpType(1058)=12; RcvIfName(1023)=Ethernet0/0/2; SrcIPAddr(1003)=9.1.1.1; DSLiteTunnelPeer(1040)=--; DstIPAddr(1007)=6.1.1.1; RcvVPNInstance(1041)=--; Action(1049)=logging; BeginTime_c(1011)=20131011091319; EndTime_c(1012)=20131011091819; AtkTimes(1050)=2.

Explanation

This message is sent when ICMP parameter problem logs are aggregated.

Recommended action

No action is required.

 

ATK_ICMP_PARAPROBLEM_RAW

Message text

IcmpType(1058)=[UINT32]; RcvIfName(1023)=[STRING]; SrcIPAddr(1003)=[IPADDR]; DSLiteTunnelPeer(1040)=[STRING]; DstIPAddr(1007)=[IPADDR]; RcvVPNInstance(1041)=[STRING]; Action(1049)=[STRING].

Variable fields

$1: ICMP message type.

$2: Receiving interface name.

$3: Source IP address.

$4: IP address of the peer DS-Lite tunnel interface.

$5: Destination IP address.

$6: Name of the receiving VPN instance.

$7: Actions against the attack.

Severity level

5

Example

ATK/5/ATK_ICMP_PARAPROBLEM_RAW: IcmpType(1058)=12; RcvIfName(1023)=Ethernet0/0/2; SrcIPAddr(1003)=9.1.1.1; DSLiteTunnelPeer(1040)=--; DstIPAddr(1007)=6.1.1.1; RcvVPNInstance(1041)=--; Action(1049)=logging.

Explanation

If log aggregation is enabled, for ICMP parameter problem packets of the same attributes, this message is sent only when the first packet is received.

If log aggregation is disabled, this message is sent every time an ICMP parameter problem packet is received.

Recommended action

No action is required.

 

ATK_ICMP_PARAPROBLEM_RAW_SZ

Message text

IcmpType(1058)=[UINT32]; SrcZoneName(1025)=[STRING]; SrcIPAddr(1003)=[IPADDR]; DSLiteTunnelPeer(1040)=[STRING]; DstIPAddr(1007)=[IPADDR]; RcvVPNInstance(1041)=[STRING]; Action(1049)=[STRING].

Variable fields

$1: ICMP message type.

$2: Source security zone name.

$3: Source IP address.

$4: IP address of the peer DS-Lite tunnel interface.

$5: Destination IP address.

$6: Name of the receiving VPN instance.

$7: Actions against the attack.

Severity level

5

Example

ATK/5/ATK_ICMP_PARAPROBLEM_RAW_SZ: IcmpType(1058)=12; SrcZoneName(1025)=Trust; SrcIPAddr(1003)=9.1.1.1; DSLiteTunnelPeer(1040)=--; DstIPAddr(1007)=6.1.1.1; RcvVPNInstance(1041)=--; Action(1049)=logging.

Explanation

If log aggregation is enabled, for ICMP parameter problem packets of the same attributes, this message is sent only when the first packet is received.

If log aggregation is disabled, this message is sent every time an ICMP parameter problem packet is received.

Recommended action

No action is required.

 

ATK_ICMP_PARAPROBLEM_SZ

Message text

IcmpType(1058)=[UINT32]; SrcZoneName(1025)=[STRING]; SrcIPAddr(1003)=[IPADDR]; DSLiteTunnelPeer(1040)=[STRING]; DstIPAddr(1007)=[IPADDR]; RcvVPNInstance(1041)=[STRING]; Action(1049)=[STRING]; BeginTime_c(1011)=[STRING]; EndTime_c(1012)=[STRING]; AtkTimes(1050)=[UINT32].

Variable fields

$1: ICMP message type.

$2: Source security zone name.

$3: Source IP address.

$4: IP address of the peer DS-Lite tunnel interface.

$5: Destination IP address.

$6: Name of the receiving VPN instance.

$7: Actions against the attack.

$8: Start time of the attack.

$9: End time of the attack.

$10: Attack times.

Severity level

5

Example

ATK/5/ATK_ICMP_PARAPROBLEM_SZ: IcmpType(1058)=12; SrcZoneName(1025)=Trust; SrcIPAddr(1003)=9.1.1.1; DSLiteTunnelPeer(1040)=--; DstIPAddr(1007)=6.1.1.1; RcvVPNInstance(1041)=--; Action(1049)=logging; BeginTime_c(1011)=20131011091319; EndTime_c(1012)=20131011091819; AtkTimes(1050)=2.

Explanation

This message is sent when ICMP parameter problem logs are aggregated.

Recommended action

No action is required.

 

ATK_ICMP_PINGOFDEATH

Message text

RcvIfName(1023)=[STRING]; SrcIPAddr(1003)=[IPADDR]; DSLiteTunnelPeer(1040)=[STRING]; DstIPAddr(1007)=[IPADDR]; RcvVPNInstance(1041)=[STRING]; Action(1049)=[STRING]; BeginTime_c(1011)=[STRING]; EndTime_c(1012)=[STRING]; AtkTimes(1050)=[UINT32].

Variable fields

$1: Receiving interface name.

$2: Source IP address.

$3: IP address of the peer DS-Lite tunnel interface.

$4: Destination IP address.

$5: Name of the receiving VPN instance.

$6: Actions against the attack.

$7: Start time of the attack.

$8: End time of the attack.

$9: Attack times.

Severity level

3

Example

ATK/3/ATK_ICMP_PINGOFDEATH: RcvIfName(1023)=Ethernet0/0/2; SrcIPAddr(1003)=9.1.1.1; DSLiteTunnelPeer(1040)=--; DstIPAddr(1007)=6.1.1.1; RcvVPNInstance(1041)=--; Action(1049)=logging; BeginTime_c(1011)=20131011074913; EndTime_c(1012)=20131011075413; AtkTimes(1050)=2.

Explanation

This message is sent when logs are aggregated for ICMP packets larger than 65535 bytes with the MF flag set to 0.

Recommended action

No action is required.

 

ATK_ICMP_PINGOFDEATH_RAW

Message text

RcvIfName(1023)=[STRING]; SrcIPAddr(1003)=[IPADDR]; DSLiteTunnelPeer(1040)=[STRING]; DstIPAddr(1007)=[IPADDR]; RcvVPNInstance(1041)=[STRING]; Action(1049)=[STRING].

Variable fields

$1: Receiving interface name.

$2: Source IP address.

$3: IP address of the peer DS-Lite tunnel interface.

$4: Destination IP address.

$5: Name of the receiving VPN instance.

$6: Actions against the attack.

Severity level

3

Example

ATK/3/ATK_ICMP_PINGOFDEATH_RAW: RcvIfName(1023)=Ethernet0/0/2; SrcIPAddr(1003)=9.1.1.1; DSLiteTunnelPeer(1040)=--; DstIPAddr(1007)=6.1.1.1; RcvVPNInstance(1041)=--; Action(1049)=logging.

Explanation

This message is for the ping of death attack. The attack uses ICMP packets larger than 65535 bytes with the MF flag set to 0.

If log aggregation is enabled, for packets of the same attributes, this message is sent only when the first packet is received.

If log aggregation is disabled, this message is sent every time a packet is received.

Recommended action

No action is required.

 

ATK_ICMP_PINGOFDEATH_RAW_SZ

Message text

SrcZoneName(1025)=[STRING]; SrcIPAddr(1003)=[IPADDR]; DSLiteTunnelPeer(1040)=[STRING]; DstIPAddr(1007)=[IPADDR]; RcvVPNInstance(1041)=[STRING]; Action(1049)=[STRING].

Variable fields

$1: Source security zone name.

$2: Source IP address.

$3: IP address of the peer DS-Lite tunnel interface.

$4: Destination IP address.

$5: Name of the receiving VPN instance.

$6: Actions against the attack.

Severity level

3

Example

ATK/3/ATK_ICMP_PINGOFDEATH_RAW_SZ: SrcZoneName(1025)=Trust; SrcIPAddr(1003)=9.1.1.1; DSLiteTunnelPeer(1040)=--; DstIPAddr(1007)=6.1.1.1; RcvVPNInstance(1041)=--; Action(1049)=logging.

Explanation

This message is for the ping of death attack. The attack uses ICMP packets larger than 65535 bytes with the MF flag set to 0.

If log aggregation is enabled, for packets of the same attributes, this message is sent only when the first packet is received.

If log aggregation is disabled, this message is sent every time a packet is received.

Recommended action

No action is required.

 

ATK_ICMP_PINGOFDEATH_SZ

Message text

SrcZoneName(1025)=[STRING]; SrcIPAddr(1003)=[IPADDR]; DSLiteTunnelPeer(1040)=[STRING]; DstIPAddr(1007)=[IPADDR]; RcvVPNInstance(1041)=[STRING]; Action(1049)=[STRING]; BeginTime_c(1011)=[STRING]; EndTime_c(1012)=[STRING]; AtkTimes(1050)=[UINT32].

Variable fields

$1: Source security zone name.

$2: Source IP address.

$3: IP address of the peer DS-Lite tunnel interface.

$4: Destination IP address.

$5: Name of the receiving VPN instance.

$6: Actions against the attack.

$7: Start time of the attack.

$8: End time of the attack.

$9: Attack times.

Severity level

3

Example

ATK/3/ATK_ICMP_PINGOFDEATH_SZ: SrcZoneName(1025)=Trust; SrcIPAddr(1003)=9.1.1.1; DSLiteTunnelPeer(1040)=--; DstIPAddr(1007)=6.1.1.1; RcvVPNInstance(1041)=--; Action(1049)=logging; BeginTime_c(1011)=20131011074913; EndTime_c(1012)=20131011075413; AtkTimes(1050)=2.

Explanation

This message is sent when logs are aggregated for ICMP packets larger than 65535 bytes with the MF flag set to 0.

Recommended action

No action is required.

 

ATK_ICMP_REDIRECT

Message text

IcmpType(1058)=[UINT32]; RcvIfName(1023)=[STRING]; SrcIPAddr(1003)=[IPADDR]; DSLiteTunnelPeer(1040)=[STRING]; DstIPAddr(1007)=[IPADDR]; RcvVPNInstance(1041)=[STRING]; Action(1049)=[STRING]; BeginTime_c(1011)=[STRING]; EndTime_c(1012)=[STRING]; AtkTimes(1050)=[UINT32].

Variable fields

$1: ICMP message type.

$2: Receiving interface name.

$3: Source IP address.

$4: IP address of the peer DS-Lite tunnel interface.

$5: Destination IP address.

$6: Name of the receiving VPN instance.

$7: Actions against the attack.

$8: Start time of the attack.

$9: End time of the attack.

$10: Attack times.

Severity level

5

Example

ATK/5/ATK_ICMP_REDIRECT: IcmpType(1058)=5; RcvIfName(1023)=Ethernet0/0/2; SrcIPAddr(1003)=9.1.1.1; DSLiteTunnelPeer(1040)=--; DstIPAddr(1007)=6.1.1.1; RcvVPNInstance(1041)=--; Action(1049)=logging; BeginTime_c(1011)=20131011091319; EndTime_c(1012)=20131011091819; AtkTimes(1050)=2.

Explanation

This message is sent when ICMP redirect logs are aggregated.

Recommended action

No action is required.

 

ATK_ICMP_REDIRECT_RAW

Message text

IcmpType(1058)=[UINT32]; RcvIfName(1023)=[STRING]; SrcIPAddr(1003)=[IPADDR]; DSLiteTunnelPeer(1040)=[STRING]; DstIPAddr(1007)=[IPADDR]; RcvVPNInstance(1041)=[STRING]; Action(1049)=[STRING].

Variable fields

$1: ICMP message type.

$2: Receiving interface name.

$3: Source IP address.

$4: IP address of the peer DS-Lite tunnel interface.

$5: Destination IP address.

$6: Name of the receiving VPN instance.

$7: Actions against the attack.

Severity level

5

Example

ATK/5/ATK_ICMP_REDIRECT_RAW: IcmpType(1058)=5; RcvIfName(1023)=Ethernet0/0/2; SrcIPAddr(1003)=9.1.1.1; DSLiteTunnelPeer(1040)=--; DstIPAddr(1007)=6.1.1.1; RcvVPNInstance(1041)=--; Action(1049)=logging.

Explanation

If log aggregation is enabled, for ICMP redirect packets of the same attributes, this message is sent only when the first packet is received.

If log aggregation is disabled, this message is sent every time an ICMP redirect packet is received.

Recommended action

No action is required.

 

ATK_ICMP_REDIRECT_RAW_SZ

Message text

IcmpType(1058)=[UINT32]; SrcZoneName(1025)=[STRING]; SrcIPAddr(1003)=[IPADDR]; DSLiteTunnelPeer(1040)=[STRING]; DstIPAddr(1007)=[IPADDR]; RcvVPNInstance(1041)=[STRING]; Action(1049)=[STRING].

Variable fields

$1: ICMP message type.

$2: Source security zone name.

$3: Source IP address.

$4: IP address of the peer DS-Lite tunnel interface.

$5: Destination IP address.

$6: Name of the receiving VPN instance.

$7: Actions against the attack.

Severity level

5

Example

ATK/5/ATK_ICMP_REDIRECT_RAW_SZ: IcmpType(1058)=5; SrcZoneName(1025)=Trust; SrcIPAddr(1003)=9.1.1.1; DSLiteTunnelPeer(1040)=--; DstIPAddr(1007)=6.1.1.1; RcvVPNInstance(1041)=--; Action(1049)=logging.

Explanation

If log aggregation is enabled, for ICMP redirect packets of the same attributes, this message is sent only when the first packet is received.

If log aggregation is disabled, this message is sent every time an ICMP redirect packet is received.

Recommended action

No action is required.

 

ATK_ICMP_REDIRECT_SZ

Message text

IcmpType(1058)=[UINT32]; SrcZoneName(1025)=[STRING]; SrcIPAddr(1003)=[IPADDR]; DSLiteTunnelPeer(1040)=[STRING]; DstIPAddr(1007)=[IPADDR]; RcvVPNInstance(1041)=[STRING]; Action(1049)=[STRING]; BeginTime_c(1011)=[STRING]; EndTime_c(1012)=[STRING]; AtkTimes(1050)=[UINT32].

Variable fields

$1: ICMP message type.

$2: Source security zone name.

$3: Source IP address.

$4: IP address of the peer DS-Lite tunnel interface.

$5: Destination IP address.

$6: Name of the receiving VPN instance.

$7: Actions against the attack.

$8: Start time of the attack.

$9: End time of the attack.

$10: Attack times.

Severity level

5

Example

ATK/5/ATK_ICMP_REDIRECT_SZ: IcmpType(1058)=5; SrcZoneName(1025)=Trust; SrcIPAddr(1003)=9.1.1.1; DSLiteTunnelPeer(1040)=--; DstIPAddr(1007)=6.1.1.1; RcvVPNInstance