H3C LSWM18CQMSEC Interface Card User Manual-6PW106

HomeSupportResource CenterH3C LSWM18CQMSEC Interface Card User Manual-6PW106
Download Book
Table of Contents
Related Documents

H3C LSWM18CQMSEC interface card user manual-6PW106

 

Introduction

Overview

The LSWM18CQMSEC interface card provides eight QSFP28 ports. These QSFP28 ports support MACsec.

Figure 1 Front panel

(1) QSFP28 port LED

(2) QSFP28 port

 

QSFP28 ports

You can install the following transceiver modules and cables in the QSFP28 ports on the card:

·    QSFP28 transceiver modules described in Table 1 and Table 2

·    QSFP28 cables in Table 3

·    QSFP28 to SFP28 copper cables in Table 4

·    QSFP+ transceiver modules in Table 5 and Table 6

·    QSFP+ cables in Table 7

·    QSFP+ to SFP+ copper cables in Table 8

Table 1 QSFP28 transceiver modules available for the QSFP28 ports (1)

QSFP28 transceiver module

Central wavelength (nm)

Connector

QSFP-100G-ER4L-WDM1300

Four lanes:

·     1294.531296.59

·     1299.021301.09

·     1303.541305.63

·     1308.091310.19

LC

QSFP-100G-SR4-MM850

850

MPO (PC polished, 12-fiber)

QSFP-100G-PSM4-SM1310

12951325

MPO (APC polished, 12-fiber)

QSFP-100G-LR4-WDM1300

Four lanes:

·   1295

·   1300

·   1304

·   1309

LC

QSFP-100G-LR4L-WDM1300

Four lanes:

·   1264.51277.5

·   1284.51297.5

·   1304.51317.5

·   1324.51337.5

LC

QSFP-100G-SWDM4-MM850

Four lanes:

·     850

·     880

·     910

·     940

LC

 

Table 2 QSFP28 transceiver modules available for the QSFP28 ports (2)

QSFP+ transceiver module

Cable/fiber diameter (µm)

Modal bandwidth (MHz × km)

Max transmission distance

QSFP-100G-ER4L-WDM1300

Single-mode, 9/125

N/A

40 km (24.85 miles)

QSFP-100G-SR4-MM850

Multi-mode, 50/125

2000

70 m (229.66 ft)

4700

100 m (328.08 ft)

QSFP-100G-PSM4-SM1310

Single-mode, 9/125

N/A

0.5km (0.31 miles)

QSFP-100G-LR4-WDM1300

Single-mode, 9/125

N/A

10 km (6.21 miles)

QSFP-100G-LR4L-WDM1300

Single-mode, 9/125

N/A

2km (1.24 miles)

QSFP-100G-SWDM4-MM850

Multi-mode, 50/125

2000

75 m (246.06 ft)

4700

100 m (328.08 ft)

 

Table 3 QSFP28 cables available for the QSFP28 ports

Cable model

Cable length

Data rate

QSFP28 copper cable

QSFP-100G-D-CAB-1M

1 m (3.28 ft)

100 Gbps

QSFP-100G-D-CAB-3M

3 m (9.84 ft)

QSFP-100G-D-CAB-5M

5 m (16.40 ft)

QSFP28 fiber cable

QSFP-100G-D-AOC-7M

7 m (22.97 ft)

100 Gbps

QSFP-100G-D-AOC-10M

10 m (32.81 ft)

QSFP-100G-D-AOC-20M

20 m (65.62 ft)

 

Table 4 QSFP28 to SFP28 copper cables available for the QSFP28 ports

QSFP28 to SFP28 copper cable

Cable length

Data rate

QSFP-100G-4SFP-25G-CAB-1M

1 m (3.28 ft)

100 Gbps

QSFP-100G-4SFP-25G-CAB-3M

3 m (9.84 ft)

QSFP-100G-4SFP-25G-CAB-5M

5 m (16.40 ft)

 

Table 5 QSFP+ transceiver modules available for the QSFP28 ports (1)

QSFP+ transceiver module

Central wavelength (nm)

Connector

QSFP-40G-SR4-MM850

850

MPO (PC polished, 12-fiber)

QSFP-40G-CSR4-MM850

850

MPO (PC polished, 12-fiber)

QSFP-40G-LR4-PSM1310

1310

MPO (APC polished, 12-fiber)

QSFP-40G-BIDI-SR-MM850

850

LC

QSFP-40G-LR4-WDM1300

Four lanes:

·   1271

·   1291

·   1311

·   1331

LC

QSFP-40G-LR4L-WDM1300

Four lanes:

·   1271

·   1291

·   1311

·   1331

LC

 

Table 6 QSFP+ transceiver modules available for the QSFP28 ports (2)

QSFP+ transceiver module

Cable/fiber diameter (µm)

Modal bandwidth (MHz × km)

Max transmission distance

QSFP-40G-SR4-MM850

Multi-mode, 50/125

2000

100 m (328.08 ft)

4700

150 m (492.12 ft)

QSFP-40G-CSR4-MM850

Multi-mode, 50/125

2000

300 m (984.25 ft)

4700

400 m (1312.33 ft)

QSFP-40G-LR4-PSM1310

Single-mode, 9/125

N/A

10 km (6.21 miles)

QSFP-40G-BIDI-SR-MM850

Multi-mode, 50/125

2000

100 m (328.08 ft)

4700

150 m (492.12 ft)

QSFP-40G-LR4-WDM1300

Single-mode, 9/125

N/A

10 km (6.21 miles)

QSFP-40G-LR4L-WDM1300

Single-mode, 9/125

N/A

2 km (1.24 miles)

 

Table 7 QSFP+ cables available for the QSFP28 ports

QSFP+ cable

Cable length

Data rate

QSFP+ copper cable

LSWM1QSTK0

1 m (3.28 ft)

40 Gbps

LSWM1QSTK1

3 m (9.84 ft)

LSWM1QSTK2

5 m (16.40 ft)

QSFP+ fiber cable

QSFP-40G-D-AOC-7M

7 m (22.97 ft)

40 Gbps

QSFP-40G-D-AOC-10M

10 m (32.81 ft)

QSFP-40G-D-AOC-20M

20 m (65.62 ft)

 

Table 8 QSFP+ to SFP+ copper cables available for the QSFP28 ports

QSFP+ to SFP+ copper cable

Cable length

Data rate

LSWM1QSTK3

1 m (3.28 ft)

40 Gbps

LSWM1QSTK4

3 m (9.84 ft)

LSWM1QSTK5

5 m (16.40 ft)

 

 

NOTE:

·   As a best practice, use H3C transceiver modules and cables for the card.

·   H3C transceiver modules and cables available for the card are subject to change over time. For the most recent list of H3C transceiver modules and cables available for the card, contact H3C Support or marketing staff.

·   The transceiver modules and cables available for the card vary by product model. For the specific compatibility information, see the product installation guide or contact H3C Support or marketing staff.

·   For more information about H3C transceiver modules and cables, see H3C Transceiver Modules User Guide at www.h3c.com.

 

LEDs

Table 9 describes QSFP28 port LEDs on the front panel.

Table 9 QSFP28 port LED description

LED status

Description

Steady green

A transceiver module is installed in the port. The port is operating at 100 Gbps, and a link is present on the port.

Flashing green

The port is sending or receiving data at 100 Gbps.

Steady yellow

A transceiver module is installed in the port. The port is operating at 10/25/40 Gbps, and a link is present on the port.

Flashing yellow (3 Hz)

The port is sending or receiving data at 10/25/40 Gbps.

Off

No transceiver module is installed in the port, or no link is present on the port.

 

Installing and removing the card

 

CAUTION

CAUTION:

·   Before you install or remove the card, wear an ESD wrist strap and make sure the strap makes good skin contact and is reliably grounded.

·   To avoid device damage, do not use excessive force when you install or remove the card.

·   The LSWM18CQMSEC interface card is hot swappable. However, do not install or remove it during the startup of the switch.

 

Installing the card

1.   Remove the filler panel (if any) from the target slot.

Keep the removed filler panel secure for future use.

2.   Unpack the interface card.

Figure 2 LSWM18CQMSEC interface card

(1) Ejector lever

(2) Latch

 

3.   Press the latch on the card to release the ejector lever.

4.   As shown by callout 1 in Figure 3, insert the card slowly into the slot along the guide rails.

5.   Rotate inward the ejector lever as shown by callout 2 in Figure 3 until the latch locks the ejector lever in place.

Figure 3 Installing the card

 

Removing the card

1.   Prepare an anti-static bag.

2.   Remove the cables from the card.

3.   Press the latch to release the ejector lever

4.   Rotate outward the ejector lever as shown by callout 1 in Figure 4.

5.   Pull out the interface card slowly out of the interface card slot, as shown by callout 2 in Figure 4.

6.   Place the removed interface card in the anti-static bag.

7.   If you are not to install a new card, install a filler panel in the slot to prevent dust and ensure good ventilation in the device.

Figure 4 Removing the card

 

Installing and removing QSFP28/QSFP+ transceiver modules and cables

For information about installing and removing QSFP28 transceiver modules, QSFP28 cables, QSFP28 to SFP28 cables, QSFP+ transceiver modules, QSFP+ cables, and QSFP+ to SFP+ cables, see H3C Transceiver Modules and Network Cables Installation Guide at www.h3c.com.

Verifying the installation

After the installation is complete, determine whether the interface card is operating correctly.

If the card fails to operate correctly, perform the following steps:

1.   Reinstall the card following the installation procedures described in this document.

2.   If the problem persists, contact H3C Support.

Technical support

New H3C Technologies Co., Ltd. provides customers with comprehensive technical support and service. If you purchase the products from the sales agent of New H3C Technologies Co., Ltd., please contact our sales agent or technical personnel.

Website: http://www.h3c.com

BOM: 3101A0PD