04-Layer 3-IP Services Command Reference

HomeSupportResource CenterH3C S5560S-EI&S5560S-SI&S5500V3-SI Switch Series Command References-R612x-6W10204-Layer 3-IP Services Command Reference
15-HTTP redirect commands
Title Size Download
15-HTTP redirect commands 31.64 KB

HTTP redirect commands

http-redirect https-port

Use http-redirect https-port to specify the HTTPS redirect listening port number.

Use undo http-redirect https-port to restore the default.

Syntax

http-redirect https-port port-number

undo http-redirect https-port

Default

In Release 6126P20 and earlier, no HTTPS redirect listening port number is specified.

In Release 6127 and later, the HTTPS redirect listening port number is 6654.

Views

System view

Predefined user roles

network-admin

Parameters

port-number: Specifies the TCP port number on which the HTTPS redirect service listens for HTTPS requests. The value range for the port number is 1 to 65535.

Usage guidelines

To avoid service unavailability caused by port conflict, do not specify a TCP port number used by a well-known protocol or used by any other service. To display TCP port numbers that have been used by services, use the display tcp command.

If you execute this command multiple times, the most recent configuration takes effect.

Examples

# Specify 8888 as the HTTPS redirect listening port number.

<Sysname> system-view

[Sysname] http-redirect https-port 8888

http-redirect ssl-server-policy

Use http-redirect ssl-server-policy to associate an SSL server policy with the HTTPS redirect service.

Use undo http-redirect ssl-server-policy to restore the default.

Syntax

http-redirect ssl-server-policy policy-name

undo http-redirect ssl-server-policy

Default

No SSL server policy is associated with the HTTPS redirect service. The HTTPS redirect service uses a self-assigned certificate and the default SSL parameters.

Views

System view

Predefined user roles

network-admin

Parameters

policy-name: Specifies an SSL server policy by its name, a case-insensitive string of 1 to 31 characters.

Usage guidelines

HTTPS redirect is unavailable if the associated SSL server policy does not exist. You can first associate a nonexistent SSL server policy with the HTTPS redirect service and then configure the SSL server policy.

If you change the SSL server policy associated with the HTTPS redirect service, the new policy takes effect immediately.

If you perform this task multiple times, the most recent configuration takes effect.

Examples

# Associate SSL server policy policy1 with the HTTPS redirect service.

<Sysname> system-view

[Sysname] http-redirect ssl-server-policy policy1

Related commands

ssl server-policy