00-About the S12500X-AF & S12500-X & S9800 Command References

HomeSupportResource CenterH3C S12500X-AF & S12500-X & S9800 Switch Series Command References(R27xx)-6W10300-About the S12500X-AF & S12500-X & S9800 Command References

About the H3C S12500X-AF & S12500-X & S9800 configuration guides

CAUTION

CAUTION:

For information about modules supported by software Release 2710 and later, see the release notes for H3C S12500X-AF & S12500-X & S9800 Release 2710 and later.

 

The H3C S12500X-AF & S12500-X & S9800 configuration guides describe the software features for the H3C S12500X-AF & S12500-X & S9800 Switch Series running Release 2710 and later, and guide you through the software configuration procedures. These configuration guides also provide configuration examples to help you apply the software features to different network scenarios.

 

Configuration guide

Content

Fundamentals Configuration Guide

Covers information about using the command line interface, logging in to and setting up the device, and using the basic management features.

This guide includes:

·     CLI (command line interface overview and how to use the CLI).

·     RBAC.

·     Logging in to the device (login methods including CLI, SNMP, and Restful, and user interface configuration and access method).

·     FTP and TFTP.

·     File system management.

·     Configuration file management.

·     Software upgrade.

·     ISSU.

·     Device management.

·     Tcl.

·     Python.

·     License management.

·     Preprovisioning.

·     Automatic configuration.

Virtual Technologies Configuration Guide

Covers the following virtual technologies:

·     Intelligent Resilient Framework (IRF).

·     Multitenant Device Context (MDC).

Layer 2—LAN Switching Configuration Guide

Covers Layer 2 technologies and features used on a LAN switched network, such as VLAN technology, port isolation, and spanning tree. You can use these features to divide broadcast domains, remove Layer 2 loops, isolate users within a VLAN, or re-mark VLAN tags.

This guide includes:

·     Ethernet interface.

·     loopback, null, and inloopback interfaces.

·     Bulk interface configuration.

·     MAC address table and MAC Information.

·     Ethernet link aggregation.

·     Port isolation.

·     Spanning tree.

·     Loop detection.

·     VLAN (including VLAN, super VLAN, and private VLAN).

·     MVRP.

·     VLAN mapping.

·     LLDP.

·     Service loopback group.

·     Cut-through forwarding.

·     DRNI.

Layer 3—IP Services Configuration Guide

Covers IP addressing (including static and dynamic IPv4 and IPv6 address assignment), network performance optimization, ARP, and interoperation between IPv4 and IPv6.

This guide includes:

·     ARP (including gratuitous ARP, proxy ARP, ARP snooping, ARP fast-reply, and ARP direct route advertisement).

·     IP addressing.

·     DHCP (including DHCP overview, DHCP server, DHCP relay agent, DHCP client, DHCP snooping, and BOOTP client).

·     DNS and DDNS.

·     Basic IP forwarding and load sharing.

·     Fast forwarding.

·     Adjacency table.

·     IRDP.

·     IP performance optimization.

·     UDP helper.

·     IPv6 basics.

·     DHCPv6 (including DHCPv6 overview, DHCPv6 server, DHCPv6 relay agent, DHCPv6 client, and DHCPv6 snooping).

·     IPv6 fast forwarding.

·     Tunneling.

·     GRE.

Layer 3—IP Routing Configuration Guide

Covers the routing technologies for IPv4 and IPv6 networks of different sizes, route filtering, route control, and policy based routing.

This guide includes:

·     Basic IP routing.

·     Static routing (including default route configuration).

·     RIP.

·     OSPF.

·     IS-IS.

·     BGP.

·     Policy-based routing.

·     IPv6 static routing.

·     RIPng.

·     OSPFv3.

·     IPv6 policy-based routing.

·     Routing policy.

IP Multicast Configuration Guide

Covers Layer 2 IPv4 multicast protocols (including IGMP snooping, and multicast VLAN), Layer 3 IPv4 multicast protocols (including IGMP and PIM), Layer 2 IPv6 multicast protocols (including MLD snooping), and Layer 3 IPv6 multicast protocols (including MSDP).

This guide includes:

·     Multicast overview.

·     IGMP snooping.

·     PIM snooping.

·     Multicast VLAN.

·     Multicast routing and forwarding.

·     IGMP.

·     PIM.

·     MSDP.

·     Multicast VPN.

·     MLD snooping.

·     IPv6 multicast VLAN.

·     MLD.

MPLS Configuration Guide

Covers MPLS features.

This guide includes:

·     Basic MPLS.

·     Static LSP.

·     LDP.

·     MPLS TE.

·     Static CRLSP.

·     RSVP.

·     Tunnel policy.

·     MPLS L3VPN.

·     MPLS L2VPN.

·     VPLS.

·     MPLS OAM.

·     MCE and IPv6 MCE.

·     Static SR over MPLS.

ACL and QoS Configuration Guide

Covers information about classifying traffic with ACLs, and allocating network resources and managing congestions with QoS technologies to improve network performance and network use efficiency. You can use ACLs to help feature modules (such as QoS and IP routing) classify or filter traffic.

This guide includes:

·     ACL.

·     QoS (including QoS overview, QoS policy, priority mapping, traffic policing, GTS, and rate limit, congestion management, congestion avoidance, traffic filtering, protocol packet rate limiting, priority marking, nesting, traffic redirecting, global CAR, class-based accounting, QPPB, and appendixes).

·     Time range.

·     Data buffer.

Security Configuration Guide

Covers security features.

This guide includes:

·     AAA.

·     Password control.

·     Keychain.

·     Public key management.

·     PKI.

·     IPsec, IKE, and IKEv2.

·     SSH.

·     SSL.

·     Object group.

·     Attack detection and prevention.

·     TCP attack prevention.

·     IP source guard.

·     ARP attack protection.

·     ND attack defense.

·     uRPF.

·     FIPS.

·     MACsec.

High Availability Configuration Guide

Covers high availability technologies and features available on the switch for failure detection and failover. Failure detection technologies focus on fault detection and isolation. Failover technologies focus on network recovery.

This guide includes:

·     Ethernet OAM.

·     CFD.

·     DLDP.

·     RRPP.

·     ERPS.

·     Smart Link.

·     Monitor Link.

·     VRRP.

·     BFD.

·     Track.

·     Process placement.

Network Management and Monitoring Configuration Guide

Covers features that help you manage and monitor your network, for example, manage system events, collect traffic statistics, sample packets, assess network performance, and test network connectivity.

This guide includes:

·     System maintenance and debugging (ping, tracert, and system debugging).

·     NQA.

·     NTP and SNTP.

·     SNMP.

·     RMON.

·     Event MIB.

·     NETCONF.

·     CWMP.

·     EAA.

·     Process monitoring and maintenance.

·     Sampler.

·     Mirroring (including both port and traffic mirroring).

·     NetStream.

·     IPv6 NetStream.

·     sFlow.

·     Information center.

·     GOLD.

·     Packet capture.

·     VCF fabric.

·     Puppet.

·     Chef.

OAA Configuration Guide

Covers OAP module fundamentals and how to log in to an OAP module.

FC and FCoE Configuration Guide

Covers FC and FCoE fundamentals and configuration.

OpenFlow Configuration Guide

Covers OpenFlow fundamentals and configuration.

VXLAN Configuration Guide

Covers VXLAN fundamentals and configuration.

EVPN Configuration Guide

Covers EVPN fundamentals and configuration.

Acronyms

Lists the significant acronyms in the configuration guides.