H3C SecPath M9000 Command Reference(V7)(E9X71)-6W700-book_CHM.rar(10.40 MB)
H3C SecPath M9000 Command Reference(V7)(E9X71)-6W700-book.pdf(29.41 MB)
- Released At: 29-08-2023
- Page Views:
- Downloads:
- Table of Contents
- Related Documents
-
About the H3C SecPath M9000 Comware 7 command references
The H3C SecPath M9000 Comware 7 command references describe the commands and command syntax options available for the Comware 7-based H3C SecPath M9000 listed in "Applicable hardware and software versions."
Applicable hardware and software versions
To obtain software version information for a device, use the display version command in any view on the device. The command references use the E9X71 versions as examples to illustrate feature commands. For information about feature changes in other software versions, see the release notes for your device.
The command references are applicable to the hardware and software versions in the following table:
Series | Model | Software version | form |
H3C SecPath M9000 Multi Service Security Gateway Series | M9006/M9010/M9014/M9016-V/M9010-GM | E9171 | Distributed devices can run on: · Independent Operation mode · IRF mode |
H3C SecPath M9000-S Multi Service Security Gateway Series | M9008-S/M9008-S-6GW/M9008-S-V/M9012-S | E9771 | |
H3C SecPath M9000-AI Multi Service Security Gateway Series | M9000-AI-E4/M9000-AI-E8/M9000-AI-E16 | E9071 | |
H3C SecPath M9000-X Multi Service Security Gateway Series | M9000-X06/M9000-X10 | E9671 |
Command reference content
Table 1 lists features included in each command reference. Support for the features depends on the device model.
Table 1 Command reference content
Command reference | Content |
Fundamentals Command Reference | Covers the commands for logging in to and setting up the device. This command reference includes: · CLI · RBAC · Login management · FTP and TFTP · File system management · Configuration file management · Software upgrade · Device management · Tcl · Python · License management · MAC learning through a Layer 3 device · Cloud connection |
Virtual Technologies Command Reference | Covers the commands for configuring virtual technologies features. This command reference includes: · IRF · vSystem · Context · Reth interface and redundancy group · Failover group |
Security Command Reference | Covers the commands for configuring security features. This command reference includes: · Security zone · Security policy · Object group · Object policy · AAA · IPoE · Portal · User identification · Password control · Public key configuration · PKI · SSH · SSL · ASPF · APR · Session management · Connection limit · Attack detection and prevention · DDoS protection · uRPF · ARP attack protection · ND attack defense · IP-MAC binding · Keychain · Crypto engine · SMS · Terminal identification · Flow manager · Location identification · Server connection detection · Trusted access control |
DPI Command Reference | Covers the commands for configuring DPI features. This command reference includes: · DPI engine · IPS · URL filtering · Data filtering · File filtering · Anti-virus · Data analysis center · WAF · Proxy policy · IP reputation · Domain reputation · APT defense · DLP · Content moderation |
NAT Command Reference | Covers the commands for configuring NAT features. This command reference includes: · NAT · AFT · NAT66 |
Load Balancing Command Reference | Covers the commands for configuring load balancing.This command reference includes: · Load balancing · Global load balancing · Web cache policy |
VPN Command Reference | Covers the commands for configuring VPN features. This command reference includes: · Tunneling · GRE · L2TP · SSL VPN · IPsec |
Internet Access Behavior Management Command Reference | Covers the commands for managing Internet access behaviors. This command reference includes: · Bandwidth management · Application audit and management · NetShare control |
Interface Command Reference | Covers the interface configuration commands. This command reference includes: · Bulk interface · Ethernet interface · Loopback, null, and inloopback interfaces · Blade interface |
Layer 2—LAN Switching Command Reference | Covers the commands for configuring Layer 2 technologies and features in a LAN switched network. This command reference includes: · MAC address table · Ethernet link aggregation · VLAN · VLAN termination · Spanning tree · LLDP · Layer 2 forwarding |
Layer 3—IP Services Command Reference | Covers the commands for configuring and managing IP addressing (including static and dynamic IPv4 and IPv6 address assignment), network performance optimization, ARP, and interoperation between IPv4 and IPv6. This command reference includes: · ARP · IP addressing · DHCP · DNS · IP forwarding basic · Fast forwarding · Multi-CPU packet distribution · Adjacency table · IP performance optimization · IPv6 basics · DHCPv6 · IPv6 fast forwarding |
Layer 3—IP Routing Command Reference | Covers the commands for configuring routes for IPv4 and IPv6 networks of different sizes, route filtering, route control, and policy based routing. This command reference includes: · Basic IP routing · Static routing · RIP · OSPF · IS-IS · BGP · Policy-based routing · IPv6 static routing · IPv6 policy-based routing · RIPng · OSPFv3 · Routing policy · Guard route · RIR |
ACL and QoS Command Reference | Covers the commands for classifying traffic with ACLs, and allocating network resources and managing congestions with QoS technologies to improve network performance and network use efficiency. This command reference includes: · ACL · QoS · Time range |
IP Multicast Command Reference | Covers the commands for IP multicast features. This command reference includes: · Multicast routing and forwarding · IGMP · PIM · MSDP · IPv6 multicast routing and forwarding · MLD · IPv6 PIM · Multicast VPN |
PPP and PPPoE Command Reference | Covers the commands for PPP and PPPoE features. |
High Availability Command Reference | Covers high availability commands for managing failure detection and failover. |
Network Management and Monitoring Command Reference | Covers the commands that help you manage and monitor your network, for example, manage system events, collect traffic statistics, sample packets, assess network performance, and test network connectivity. This command reference includes: · System maintenance and debugging · NQA · NTP · EAA · Process monitoring and maintenance · NETCONF · Information center · SNMP · NetStream · RMON · Flow log · Event MIB · Packet capture · Fast log output · Mirroring · GOLD · BFD · Track · Interface collaboration · Process placement |
Service Chain Command Reference | Covers the commands for configuring service chains. |
MPLS Instance Command Reference | Covers the commands for configuring MPLS. This command reference includes: · Basic MPLS · LDP · MPLS L3VPN |
VXLAN Command Reference | Covers the commands for configuring VXLANs. |