About the H3C SecPath firewalls Comware 7 command references

F5000 series

F5030, F5030-6GW, F5060, F5080, F5000-M, F5000-A, F5000-V30

F9628P22

F5010, F5020-GM, F5020, F5040, F5000-C, F5000-S

F9342P22

F5000-AI series

F5000-AI-20, F5000-AI-40

F9628P22

F10X0 series

F1005, F1010

F9536P22

F1020, F1020-GM, F1030, F1030-GM, F1050, F1060, F1070, F1070-GM, F1070-GM-L, F1080, F1000-V70

F9345P22

F1090

F8601P22

F1000-AK series

F1000-AK108, F1000-AK109, F1000-AK110, F1000-AK115, F1000-AK120, F1000-AK125, F1000-AK710, F1000-AK1110, F1000-AK1120, F1000-AK1130, F1000-AK1140

F9536P22

F1000-AK130, F1000-AK135, F1000-AK140, F1000-AK145, F1000-AK150, F1000-AK155, F1000-AK160, F1000-AK165, F1000-AK170, F1000-AK175, F1000-AK180, F1000-AK185, F1000-AK711, F1000-GM-AK370, F1000-GM-AK380, F1000-AK1212, F1000-AK1222, F1000-AK1232, F1000-AK1312, F1000-AK1322, F1000-AK1332

F9345P22

F1000-AK1414, F1000-AK1424, F1000-AK1434, F1000-AK1514, F1000-AK1524, F1000-AK1534, F1000-AK1614

F8601P22

F1000-AI-X0 series

F1000-AI-20, F1000-AI-30, F1000-AI-50

F9345P22

F1000-AI-60, F1000-AI-70, F1000-AI-80, F1000-AI-90

F8601P22

F1000-L series

F1003-L, F1005-L, F1010-L

F9536P22

SecBlade III FW modules

LSU3FWCEA0, LSUM1FWCEAB0, LSX1FWCEA1

F8241P22

SecBlade IV NGFW modules

LSPM6FWD

F8535P22

LSXM1FWDF1, LSUM1FWDEC0, IM-NGFWX-IV, LSQM1FWDSC0, LSWM1FWD0, LSQM2FWDSC0

F8536P22

Virtual firewalls

vFW1000, vFW2000

E1171P22

Fundamentals Command Reference

Covers the commands for logging in to and setting up the device. This command reference includes:

·     CLI

·     RBAC

·     Logging in to the firewall devices

·     FTP and TFTP

·     File system management

·     Configuration file management

·     Software upgrade

·     ISSU

·     Automatic configuration

·     Device management

·     Tcl

·     Python

·     License

Virtual Technologies Command Reference

Covers the commands for configuring virtual technologies features. This command reference includes:

·     IRF

·     IRF (applicable only to vFW)

·     Context

·     Reth interface and redundancy group

Security Command Reference

Covers the commands for configuring security features. This command reference includes:

·     Security zone

·     Security policy

·     ASPF

·     Session management

·     Object group

·     Object policy

·     IP source guard

·     AAA

·     User identification

·     Password control

·     Portal

·     MAC authentication

·     IPoE

·     Public key configuration

·     PKI

·     SSH

·     SSL

·     Connection limit

·     Attack detection and prevention

·     Server connection detection

·     ARP attack protection

·     ND attack defense

·     uRPF

·     IP-MAC binding

·     APR

·     Keychain

·     Crypto engine

·     MAC learning through a Layer 3 device

DPI Command Reference

Covers the commands for configuring DPI features. This command reference includes:

·     DPI engine

·     IPS

·     URL filtering

·     Data filtering

·     File filtering

·     Anti-virus

·     Data analysis center

·     Proxy policy

·     WAF

·     IP reputation

NAT Command Reference

Covers the commands for configuring NAT features. This command reference includes:

·     NAT

·     AFT

·     NAT66

VPN Command Reference

Covers the commands for configuring VPN features. This command reference includes:

·     SSL VPN

·     Tunneling

·     IPsec, IKE, and IKEv2

·     GRE

·     L2TP

·     ADVPN

Internet Access Behavior Management Command Reference

Covers the commands for managing Internet access behaviors. This command reference includes:

·     Bandwidth management

·     Application audit and management

·     NetShare control

Load Balancing Command Reference

Covers the commands for configuring load balancing.

High Availability Command Reference

Covers high availability commands for managing failure detection and failover.

Interface Command Reference

Covers the interface configuration commands. This command reference includes:

·     Bulk interface

·     Ethernet interface

·     Loopback, null, and inloopback interfaces

Layer 2—LAN Switching Command Reference

Covers the commands for configuring Layer 2 technologies and features in a LAN switched network. This command reference includes:

·     MAC address table

·     Layer 2 forwarding

·     Ethernet link aggregation

·     VLAN

·     VLAN termination

·     LLDP

·     Spanning tree

Layer 2—WAN Access Command Reference

Covers the commands for configuring Layer 2 WAN access features. This command reference includes:

·     3G and 4G modem management

·     PPP

Layer 3—IP Services Command Reference

Covers the commands for configuring and managing IP addressing (including static and dynamic IPv4 and IPv6 address assignment), network performance optimization, ARP, and interoperation between IPv4 and IPv6. This command reference includes:

·     IP addressing

·     Basic IP forwarding and load sharing

·     Fast forwarding

·     ARP

·     IPv6 basics

·     IPv6 fast forwarding

·     DHCP

·     DHCPv6

·     DNS

·     IP performance optimization

·     Multi-CPU packet distribution

·     WAAS

·     Adjacency table

Layer 3—IP Routing Command Reference

Covers the commands for configuring routes for IPv4 and IPv6 networks of different sizes, route filtering, route control, and policy based routing. This command reference includes:

·     IP routing basics

·     Static routing

·     IPv6 static routing

·     RIP

·     RIPng

·     OSPF

·     OSPFv3

·     IS-IS

·     BGP

·     Policy-based routing

·     IPv6 policy-based routing

·     Routing policy

·     Guard route

ACL and QoS Command Reference

Covers the commands for classifying traffic with ACLs, and allocating network resources and managing congestions with QoS technologies to improve network performance and network use efficiency. This command reference includes:

·     ACL

·     QoS

·     Time range

IP Multicast Command Reference

Covers the commands for IP multicast features. This command reference includes:

·     Multicast routing and forwarding

·     IGMP

·     PIM

Network Management and Monitoring Command Reference

Covers the commands that help you manage and monitor your network, for example, manage system events, collect traffic statistics, sample packets, assess network performance, and test network connectivity. This command reference includes:

·     Information center

·     Flow log

·     Fast log output

·     NetStream

·     Mirroring

·     Packet capture

·     System maintenance and debugging

·     NQA

·     NTP

·     EAA

·     Process monitoring and maintenance

·     NETCONF

·     CWMP

·     SNMP

·     RMON

·     Event MIB

·     BFD

·     Track

·     Interface collaboration

·     Interface backup

·     Monitor Link

·     Smart Link

·     Process placement

Service Chain Command Reference

Covers the commands for configuring service chains.

VPN Instance Command Reference

Covers the commands for configuring VPN instances.

VXLAN Command Reference

Covers the commands for configuring VXLANs.