H3C WA6330 New Generation 802.11ax Indoor AP
- H3C WA6330 Internal Antennas 6 Streams Triple Radio 802.11ax/ac/n AP
H3C WA6330 series access point is the latest generation wireless access point developed based on 802.11ax standard. They are designed with creative triple-radio 802.11ax technology standard respectively, and provide a transmission speed at least 2 times faster than 802.11ac products. This makes the series suitable for high-density access scenarios, such as hotel, retail stores and smart enterprise campus. It is compact in appearance and support both wall mounting and ceiling mounting.
New-generation Wi-Fi standard 802.11ax (Wi-Fi 6)
WA6330 triple-radio AP adopts 802.11ax technology can provide up to 3.267Gbps access rate, which is suitable for all high-density access scenarios and provides better access experience.
H3C WA6330 series AP supports DL/UL MU-MIMO technology, which is the most important feature of 802.11ax. DL/UL MU-MIMO technology allows AP to send data to multiple stations simultaneously. For example, it can communicate with up to eight stations at the same time, breaking through the traditional wireless serial communication mechanism, increasing the utilization rate of wireless spectrum resources, improving the number of effective access users and access experience under high-density deployment.
Smart cloud access and optimal WLAN TCO
The WA6330 series complies with the 802.11ax standard. It works on triple radio and provides high-speed transmission that is at least 2 times faster than 802.11ac products under the same conditions. The WA6330 series is available for easy maintenance and management from the H3C Oasis platform. Through smart RF optimization technologies, the series provides mobile cloud access in coverage scope, access density, and operation stability, and achieves the optimal wireless network Total Cost of Ownership (TCO).
Orthogonal frequency division multiple access (OFDMA)
802.11ax uses OFDMA to allow multiple users to transmit data simultaneously. OFDMA splits a channel into sub-channels, known as resource units (RUs), with specific subcarriers, and assigns RUs to different users for simultaneous transmission. OFDMA enables simultaneous multi-user transmission and reduces latency caused by channel contention.
802.11ax assigns a different color per BSS to help WA6330 identify co-channel interference and stop transmission in time. If a radio detects 802.11ax signals from a BSS that has the same color as the radio's BSS, it determines that co-channel interference exists and stops data transmission. This optimizes frequency reuse and improves network capacity.
Target Wake Time (TWT)
TWT improves power efficiency and reduces contention by increasing client sleep time and allowing negotiation of the times that clients can access the medium.
Support for IoT services
For the various application in IoT era, WA6330 has been designed IoT port for H3C T300 IoT modules to provide short-distance and low-power consumption IoT services, such as BLE, RFID, ZigBee, and UWB. Those APs can connect up to ten T300 modules by IoT port. Both this IoT port and network port support link aggregation (LACP) which increase availability and capacity.
WA6330 employs a green design that supports dynamic MIMO power saving (DMPS), enhanced automatic power save delivery (E-APSD), and smart identification of terminal network requirements. It can dynamically adjust the MIMO working mode and efficiently put terminals to sleep.
WA6330 supports green AP mode that enables single radio standby and allows for more precise power control.
WA6330 supports the innovative per-packet power control (PPC) technology, which reduces standby power consumption and improves mobile device standby time.
WA6330 supports both centralized forwarding and local forwarding. With centralized forwarding, APs tunnel incoming data frames to the AC and the AC forwards the data frames. With local forwarding, APs directly forward data frames. The local forwarding mode significantly saves wired bandwidth.
IPv4 and IPv6 dual stack (Native IPv6)
WA6330 is fully compliant with IPv6, and implements dual IPv4/IPv6 protocol stacks. It can automatically associate with an AC to provide wireless services no matter in an IPv4 or IPv6 network, so that it never runs as an information silo.
Real Time Spectrum Guard (RTSG)
Real Time Spectrum Guard (RTSG) is the innovative H3C professional state-monitoring program for the wireless spectrum. H3C 802.11ax series AP supports the internal RF data acquisition module to achieve deeply integrated monitoring and real time spectrum protection.
The RTSG Console is integrated into the iMC (intelligent Management Center), and performs data acquisition through the CAPWAP tunnel management and Sensor AP. It can achieve 24x7 wireless signal quality monitoring, trend assessment and unauthorized interference alert. Through active probe and 2.4GHz/5GHz RF interference source (WiFi or non-WiFi) in every band, it provides a graphic representation of real-time FFT plot of the spectral density plot, spectrum diagram, the duty cycle map, event spectrum diagram, channel gain and interference gain. It can also automatically identify the source of interference, to determine the location of rogue wireless equipment, to ensure the wireless network is always in great shape. Combined with H3C iMC IAR (Intelligent Analysis Report) module, it can maintain a complete history of RF quality in the coverage area, including its trace and playback, automatically generate customized trend, compliance and audit reports.
To cater for the different supervision demands in user's wireless environment, the RTSG solution can be deployed in either Local mode or Monitor mode. In Local Mode, you can maintain normal user access and data packet forwarding without compromising effective spectrum protection.
H3C Cellular Coexistence Feature (CCF)
H3C uses built-in hardware filtering to minimize the impact of interference from 3G/4G cellular networks.
Anchor AC mode
Anchor AC mode is designed for networks of all sizes, including SMB. In Anchor AC mode, AP will serve as a virtual controller for the entire network.
H3C cloud-managed APs were developed based on the Cloudnet platform, on which network administrators can manage the cloud-managed APs directly, for example, view cloud-managed AP status in real time and deploy configurations from the cloud to cloud-managed APs. This greatly improves network efficiency and enhances security and stability.
As one of components of H3C iMC, EAD integrates network access and endpoint security products, and helps ensure that only wireless clients that comply with enterprise security policies can access the network. When working with a security policy server, it can remind users, isolate or log them off when their systems are infected or not patched correctly. Only wireless clients that are complied with security policies are admitted. This enhances overall wireless security.
Remote probing and analysis
WA6330 can act as a remote probing and analysis sensor to monitor a WLAN, collect channel information, and report the information to the local device for further analysis. This can satisfy wireless network monitoring and maintenance requirements.
ROE, through feature- and protocol-based RF optimization, provides greater speed and QoS in middle- to high-density access and streaming media transmission scenarios. It provides features such as multi-user fairness, mixed access fairness, interference filtering, speed optimization, band navigation which can support 5G radio priority to assign 5G radio-supported clients to 5G radio, prior to 2.4G, multicast optimization (IPv4/IPv6), per-packet power control, and intelligent bandwidth guarantee. RF Management automatically assigns channel and power settings, provides airtime fairness, and ensures AP stay clear of all source of RF interference to deliver reliable, high performance WLANs.
WA6330 supports session- and traffic-based load balancing. When the load of the AP reaches the upper limit, the AC rejects the association requests of new clients and directs the clients to another AP with smaller load. What sets H3C intelligent load balancing apart from existing load balancing solutions is that it starts load balancing only for clients that are in the overlapping AP coverage. This maximizes wireless network capacity.
Intelligent unified wired and wireless management
The whole series of H3C wireless products can be managed by the Wireless Service Manager (WSM) component of H3C Intelligent Management Center (IMC). WSM provides unified management of wired and wireless networks, adding wireless network management functions into existing wired network management systems.
WSM offers a simple and user friendly management platform for wireless network administrators. It implements panel management, troubleshooting, performance monitoring, software version control, configuration management, and user access management of wireless devices. In addition, it can manage wired devices by cooperating with other components in IMC.
Weight(excluding mounting accessories)
Dimensions(excluding mounting and accessories)
Two（one for 100/1000M/2.5G Rj45，one for 10/100/1000M Rj45 support IoT）
support LACP(support between both network ports for redundancy and increased capacity)
Local Power supply
Built-in omni-directional antenna
Radio 1 : 5dBi antenna gain @ 5G
Radio 2 : 5dBi antenna gain @ 5G
Radio 3 : 5dBi antenna gain @ 2.4G or 5dBi antenna gain @ 5G
Built-in Bluetooth, support iBeacon standard
802.11ax/ac wave2/ac/n/a : 5.725GHz-5.850GHz ; 5.47～5.725GHz; 5.15~5.35GHz
802.11ax/b/g/n : 2.4GHz-2.483GHz
OFDM : BPSK@6/9Mbps、QPSK@12/18Mbps、16-QAM@24Mbps、64-QAM@48/54Mbps
MIMO-OFDM （11n）: MCS 0-31
MIMO-OFDM （11ac）: MCS 0-11
MIMO-OFDM （11ax）: MCS 0-11
11ax: MIMO-OFDM: BPSK,QPSK,16QAM,64QAM,256QAM,1024QAM
Maximum transmit power
20 dBm (Transmit power is multi-chain combined power, no antenna gain is included. The actual transmit power depends on local laws and regulations)
Adjustable power granularity
Reset/restoration to factory default
Alternating flashing mode, orange/green/blue for different working states, breathing mode
-10ºC～55ºC(32°F to 113°F)/-40ºC～70ºC(–40°F to +158°F)
Overall power consumption
≤34W（excluding IoT modules）
GB4943、EN60601-1-2(medical electrical equipment)、UL/CSA 60950-1、EN/IEC 60950-1、EN/IEC 60950-22
GB9254、EN301 489、EN55022、FCC Part 15、RSS-210
Radio frequency certification
FCC Part 15、EN 300 328、EN 301 893、and MIIT SRRC
FCC Bulletin OET-65C、EN 50385、IC Safety Code 6
Indoor, compliant with 802.11a/b/g/n/ac/ac wace2/ax
Working frequencies and MIMO
1. 5G(1) 2*2 MIMO+5G(2) 2*2 MIMO+5G(3) 2*2 MIMO
2. 2.4G 2*2 MIMO+5G(1) 2*2 MIMO+5G(2) 2*2 MIMO
3. 2.4G(1) 2*2 MIMO+2.4G(2) 2*2 MIMO+5G 2*2MIMO
Maximum transmission speed
2.4G: 400Mbps/5G:( can be adjusted to 5G:867Mbps )
Maximum likelihood decoding (MLD)
Maximum-ratio combining (MRC)
Space-time block coding (STBC)
Low-density parity-check (LDPC)
Maximum number of clients per radio
As a best practice, configure a maximum of five virtual APs for each radio.
Open system/shared key authentication
Broadcast probe request acknowledge control
Concurrent login of WPA, WPA2,WPA3 and Pre-RSNA users
802.11k and 802.11v smart roaming
802.11r fast transition roaming
Abnormal offline check, station aging, statistics and status query
Client number limit
Link integrity check
WEP-64/128/152bit, dynamic WEP, TKIP, CCMP,WPA3
Multiple triggering conditions for unicast and broadcast key update
802.1X authentication, MAC authentication, PSK authentication, Portal authentication,PPSK
H3C WX series access controllers might be required for authentication.
Layer 2 user isolation
SSID-based user isolation
MAC address filtering
Broadcast storm suppression
Wireless terminal access
SSID and VLAN binding
Management frame protection (802.11w)
Multiple-domain authentication server
Backup authentication server
Layer 2 and Layer 3 features
IP address configuration
Static IP (available only in fat AP mode)
DHCP assigned IP (Option 60)
Local forwarding based on SSID and VLAN
IGMP Snooping/MLD Snooping
Wi-Fi Multimedia (WMM)
802.1p priority and marking on Ethernet ports
Priority mapping for wired and wireless packets
QoS policy mapping
SSID/VLAN and QoS policy mapping
Layer 2 to Layer 4 packet filtering and traffic classification
Client bandwidth management
Station-based bandwidth allocation
SSID-based bandwidth allocation
Traffic-based load balancing
Session-based load balancing
Frequency-based load balancing (supports dual-band)
Multicast optimization (IPv4/IPv6)
Call Admission Control (CAC)
Channel usage-based CAC
Green AP mode
Dynamic MIMO power saving
WMM Power Save
Trap, HTTP(S), SSH, Telnet, FTP/TFTP, SNMP V1/V2/V3 only applicable in Cloud/Fat mode
AP Working Mode
Remote probing and analysis
IEEE 802.11a/b/g/n/ac/ax, WMM, WPA, WPA2 and WPA3 – Enterprise, Personal (SAE), Enhanced Open (OWE)
Radio1: 5GHz (AP front facing down)
Radio2: 5GHz (AP front facing down)
Radio3: 2.4GHz (AP front facing down)
Radio3: 5GHz (AP front facing down)
H3C WA6330 Internal Antennas 6 Streams Triple Radio 802.11ax/ac/n Access Point, FIT
H3C 54V 40W High Power Adapter Power Supply (optional)
H3C 54V 40W High Power Adapter Power Supply(including PoE Injector, optional)