H3C WX5860H Access Controller

HomeProducts & TechnologyEnterprise ProductsWirelessH3C WX5860H Access Controller
WX5860H multiservice access controller

H3C WX5860H access controller is a new generation of high-performance multiservice unified wired and wireless access controller intended for high-end enterprise networks. It features large capacity, high availability, and rich services. Equipped with a high-performance multi-core CPU and a FPGA card, it is even capable of forwarding packets of 64 bytes at line rate over wireless channels. Running H3C's state-of-the-art Comware 7 network operating system, the WX5860H supports not only granular user control and management, comprehensive RF resource management, 7×24 wireless security control, fast Layer 2 and Layer 3 roaming, flexible QoS management, and IPv4/IPv6 dual stack, but also emerging wireless features including multi-core control plane, next-generation wireless location, Bonjour, and Hotspot 2.0.

The WX5860H greatly facilitates network deployment, configuration, and maintenance. It supports multiple flexible networking methods, including Oasis cloud management, IRF, and license synchronization. Also, it provides wired and wireless access on a single platform and enables configuration and management of wired and wireless features in one system.

Working together with H3C fit AP product series, it is an ideal access controller option for large enterprise campuses to provide wireless services such as WLAN access, wireless coverage in MAN, and Wi-Fi hotspot coverage.

*Warranty Information:H3Care CT Foundation Basic 9X5 NBD-Ship Service(1Y)

  • Warranty Information

    H3Care CT Foundation Basic 9X5 NBD-Ship Service(1Y)

  • 802.11ax AP management

    In addition to 802.11a/b/g/n/ac APs, the WX5860H can work together with H3C 802.11ax APs to provide multiple times faster wireless access rate over larger area. This feature improves user experience and ensures the application of wireless multimedia technology that requires high transmission rate.

    Cutting-edge operating system

    The WX5860H runs H3C's state-of-the-art Comware 7 network operating system. This system significantly improves product performance and reliability, and supports the increasingly complicated network applications in the enterprise market. This system offers the following advantages:

    Multi-core control—Comware 7 can adjust the ratio of the control cores to forwarding cores in the CPU to achieve an optimal balance as demanded, remarkably improving the CPU control capabilities and computing capabilities while providing strong concurrent computing capabilities.

    User-mode multitasking—In Comware 7, most network applications are executed in user mode. When you start an application, the system creates a task for the application and provides the task with private resources. If a task error occurs, the error is limited to this task and does not affect other applications and the operating system.

    User-mode task monitoring—Comware 7 monitors each task executed in user mode. When a task error occurs, the system will reload the task to ensure quick recovery of the application.

    Independent application upgrade—Comware 7 can upgrade a single module independently instead of the whole system, which enhances upgrade security and network stability significantly.

    Powerful wired and wireless processing capability

    Equipped with robust hardware, the WX5860H delivers strong concurrent computing capabilities and industry-leading wireless packet processing capabilities:

    Lately-developed high-performance multicore CPU, with 8 independent cores that can be virtualized to 32 logical cores

    High-bandwidth switching chips

    High-performance programmable FPGA card

    High-density port access

    The WX5860H offers multiple port types and high port density, significantly facilitating wired and wireless accesses and improving networking agility.

    License synchronization

    H3C license synchronization technology enhances availability of a network with multiple ACs and provides agility for network deployment.

    The following two license synchronization modes are available:

    Dual-link backup mode (two ACs)—The two ACs back up licenses for each other. When an AC fails, the other AC takes over the service and APs will be reassociated with the backup AC.

    N+1 backup mode (N ≤ 4)—An AC backs up licenses for other ACs. When one or more of the other ACs fail, the backup AC will take over the service and APs will be reassociated with the backup AC.

    Intelligent Resilient Framework (IRF)

    The H3C Intelligent Resilient Framework (IRF) technology can virtualize two WX5860H ACs into a logical device called an IRF fabric, which delivers the following benefits:

    Simplified topology—To set up an IRF fabric, you can connect the ACs directly or through an switch. No dedicated cable or port is required.

    Simplified configuration—The configurations on the IRF fabric (master AC) will be automatically synchronized to the member AC.

    1+1 redundancy—Failure of one AC does not affect the operation of the IRF fabric.

    Flexible license control—The ACs in the IRF fabric share their licenses. The number of APs that can be connected to the IRF fabric is the sum of licenses installed on the ACs. Licenses installed on an AC can be easily unloaded or migrated.

    AC hierarchy architecture

    AC hierarchy architecture is a brand new networking model engineered by H3C to cater for the need of hierarchy network construction in the market. An AC hierarchy network contains a central AC, local ACs, and APs. The central AC manages all local ACs, and local ACs provide network access to APs and process client traffic.

    The central AC has a high processing capacity and is deployed at the distribution layer. It focuses on performing global services such as network management and control and centralized authentication. It can also provide network access to APs and process client traffic.

    The local ACs can be standard ACs, all-in-one ACs (with routing and DPI features), or unified wired and wireless switches.

    AC hierarchy architecture is well suited for large-scale wireless network deployment. It supports headquarter and branch networking applications. The link bandwidth at the core layer and forwarding capacity of the central AC are no longer the bottleneck. Through centralized management on the central AC, this architecture allows automatic and convenient version upgrade and configuration synchronization of local ACs and APs. The local ACs are responsible for AP switching, significantly improving roaming performance.

    CUPID location

    The WX5860H supports CUPID location, which is similar to radar probing and provides high positioning accuracy. It enables an AP to proactively send a probe packet to a client and locate the client by calculating the time difference between the probe and response packets.

    CUPID is superior to RF fingerprinting in the following aspects:

    Item

    Description

    CUPID

    RF fingerprinting

    Obstacles

    For example, moving people

    Almost not affected

    Large signal strength attenuation

    Multipath effect

    For example, signals have been reflected and dispersed during the transmission

    Not affected

    Greatly affected

    Workload

    Field survey and signal feature investigation

    Small workload

    Large workload. It is required to set up a fingerprint database by collecting signal strengths and client locations.

    Accuracy

    Positioning accuracy

    2 m (6.56 ft)

    5 to 15 m (16.40 to 49.21 ft), typically 10 m (32.81 ft)

    Stability

    Positioning stability under interference of environmental factors

    Stable positioning result

    Positioning result susceptible to obstacles, multipath effect, deployment density, and environment changes.

    New-generation Wireless Intelligent Application Aware

    Wireless Intelligent Application Aware (wIAA) provides user role-based application-layer security, QoS, and forwarding policies for wired and wireless users. With wIAA, you can control user access and specify networks available for applications such as HTTP and FTP and the allowed bandwidth.

    The last-generation wIAA identifies packets based on the fourth-layer port number (such as port number 80 for HTTP, 20/21 for FTP). Users can bypass access restrictions simply by setting up a proxy.

    The new-generation wIAA integrates message depth analysis (DPI) and improves application identification and statistical functions. Based on the 7-layer model characteristics of Ethernet packets, as well as the typical packet signature, the new-generation wIAA implements a more precise recognition and complete restriction. With DPI, you can set up a rule to control access to certain types of websites, instead of denying each website individually. This feature simplifies network configuration and improves efficiency.

    Flexible forwarding modes

    Traditional ACs typically use the centralized forwarding mode. The AC performs centralized control and security monitoring and all user data is sent from APs to the AC for processing and forwarding. This might result in inefficient forwarding. The uplink bandwidth and the forwarding capability of the AC might become the bottleneck, especially when APs are deployed at branches, the AC is deployed at the headquarters, and APs and the AC are connected over a WAN.

    The WX5860H supports centralized forwarding, distributed forwarding, and policy-based forwarding, and users can choose the forwarding mode flexibly according to service needs and network conditions.

    The WX5860H also supports local forwarding in conjunction with centralized authentication. It can perform 802.1X and portal authentications for data streams that are forwarded locally.

    Carrier-class wireless access control and management

    The WX5860H supports the following access control methods:

    User profile-based access control

    A user profile is a configuration template that saves predefined configurations such as Committed Access Rate (CAR) and QoS policies for clients. When a client passes authentication, the authentication server sends the related user profile to the AC. The AC uses the configuration in the user profile to restrict the client's access. When the client goes offline, the AC disables the user profile. You can configure several user profiles for different clients to achieve user profile-based access control.

    MAC authentication access control

    MAC authentication allows you to configure and modify the access rights of a group of clients or a particular client on the AAA server. The refined access control method enhances the availability of WLANs and facilitates access right assignment.

    MAC-based VLAN access control

    The administrator can assign users (or MAC addresses) with the same attributes to the same VLAN and configure a VLAN-based security policy on the AC. This simplifies system configuration and refines user management to the per-user granularity.

    AP-based access control.

    The AC gets a list of permitted APs from the authentication server during client authentication, and then selects an optimal AP for the client. This allows you to control the APs that wireless clients can associate for security or accounting purposes.

    Smart Roaming Features

    Supports intra-AC roaming, cross-AC roaming, and cross-VLAN Layer 3 roaming

    Portal roaming information synchronization function: AC and AP support Portal users' non-perceived roaming between ACs on a large-scale network, without the Portal mac-trigger server. The wireless controller can independently assume the mac-trigger server function. This reduces the pressure on the portal server and prevents the portal server from becoming a performance bottleneck. When the Portal server is done, the online terminal can still roam without authentication between no less than 10 wireless controllers.

    802.1X roaming information synchronization function: AC and AP support 802.1X users for fast roaming between ACs on a large-scale network. Support dot1x authentication for fast roaming between ACs. Terminals do not need to do authentication again after roaming to a new AC. Alleviate server pressure and ensure fast access of terminals, and support fast roaming between more than 10 ACs.

    Support 802.11k/v/r fast roaming protocols

    Intelligent dynamic frequency selection (DFS)

    In a WLAN, adjacent APs need to work in non-overlapping channels to avoid channel interference. However, the non-overlapping channels in a WLAN are limited. For example, the 2.4 GHz band has only three non-overlapping channels. Meanwhile, there are many possible interference sources such as radars and microwave ovens that can affect the operation of APs in a WLAN.

    DFS can ensure that each AP operates in the optimal channel, thereby minimizing adjacent channel interference. In addition, the real-time interference detection function can help keep APs away from interference sources.

    Intelligent AP load balancing

    In a WLAN, clients prefer to associate with an AP that has a higher RSSI. As a result, a large number of clients might associate with the same AP because it has stronger signal strength. Because these clients share the wireless media, the throughput for each client will be reduced.

    The WX5860H provides session-based load balancing and traffic-based load balancing during roaming. It analyzes AP loads, determines which APs can balance loads for each other, and dynamically adjusts loads among APs to ensure adequate bandwidth for clients.

    Support SSID automatic hiding function based on radio resource utilization. When the radio resource reaches or exceeds the configured threshold, the SSID automatically hides to provide users with stable and reliable wireless services.

    Wireless intrusion detection and prevention system (WIDS/WIPS)

    The WX5860H provides the following WIDS/WIPS features: blacklist, whitelist, rogue detection, malformed packet detection, illegal client logoff, and MAC layer attack detection and countermeasures through predefined signatures. MAC layer attacks include DoS attacks, flood attacks, and man-in-the-middle attacks.

    With the huge intelligent expert information base built in the wireless application center, the AC can visually track and monitor physical locations of attackers and shut down a physical port.

    Cooperating with H3C professional core-layer firewall/IPS devices, the AC can achieve complete security protection from Layer 1 through Layer 7, fulfilling the end-to-end security requirements of both 802.11 and 802.3 standards.

    802.1X, MAC, and portal authentications

    The WX5860H supports the following authentication methods:

    802.1X authentication—The WX5860H supports local and remote 802.1X authentication and multiple 802.1X authentication methods, such as TLS, PEAP, TTLS, MD5, and SIM card. In local authentication mode, the AC acts as the authentication server and no additional AAA server is required. The WX5860H also supports dynamic VLAN assignment and ACL through predefined user profiles.

    MAC authentication—The WX5860H supports MAC address authentication to authenticate hand-held terminals such as Wi-Fi phones and hand-held mobile terminals. On the WX5860H or AAA server, you can specify MAC addresses allowed to access a WLAN. MAC addresses not specified are considered illegal and cannot access the WLAN. This function facilitates some wireless applications such as the wireless healthcare system where MAC authentication can ensure that only the PDAs of the hospital can access the dedicated WLAN but not those owned by patients.

    Portal authentication—The WX5860H provides an embedded portal server. This authentication method allows users to initiate authentication through a Web browser without installing client software. After a client passes authentication, the AC redirects the client to the specified website and simultaneously starts authorization and accounting. Customized portal pages can also be pushed to the clients for advertisement and message delivery. This is widely used in various scenarios like wireless campus, wireless city, and guest access.

    IPv4/IPv6 dual stack (native IPv6)

    The WX5860H supports both IPv4 and IPv6 client accesses. When the AC is deployed on an IPv4 network, APs connected to the AC can identify IPv6 packets and map IPv6 priorities to the tunnel priority. After receiving packets sent from APs, the AC can also use ACLs to control and filter IPv6 packets. When the AC is deployed on an IPv6 network, it will automatically negotiate with APs and establish an IPv6 tunnel with each AP and can still correctly identify and process IPv4 packets from wireless clients.

    Excellent IPv4/IPv6 adaptability enables the WX5860H to provide services to various complicated applications during migration from IPv4 to IPv6.

    The WX5860H also supports IPv6 Source Address Validation (SAVI) to address emerging IPv6 forged packet attacks on campus networks. Through address allocation protocol snooping, the AC obtains clients' IP addresses and ensures that clients use the correct address when they come online, eradicating the possibility of IP address forging and guaranteeing the reliability of source IP addresses. IPv6 SAVI in conjunction with portal authentication further guarantees the integrity and security of network packets.

    End-to-end QoS

    Developed based on the H3C's cutting-edge Comware 7 operating system, the WX5860H supports the QoS Diff-Serv model perfectly. It also supports IPv6 QoS.

    The QoS Diff-Serv model mainly includes traffic classification, traffic policing, queue management, and queue scheduling, completely supporting the six kinds of PHB services: EF, AF1 through AF4, and BE. This enables service providers to provide services with different qualities to clients, making the Internet a truly integrated network carrying data, voice and video services at the same time.

    Fast Layer 2 and Layer 3 roaming

    The WX5860H under H3C fit AP+AC architecture improves both Layer 2 and Layer 3 roaming performance significantly and enables inter-subnet roaming. This benefit greatly simplifies early wireless network planning and reduces network planning costs.

    The WX5860H uses key caching to implement fast roaming of clients. The key caching function allows clients to fast roam from one AP to another without performing the complete 802.1X authentication process while ensuring user identification and the continuity of keys. With fast roaming, an intra-AC roaming will take no more than 50 ms, which ensures transmission of speed-demanding voice traffic.

    Remote access for branches

    The WX5860H can be deployed to implement the following features for remote branch access:

    Performance improvement of services such as printer access and terminal communication in branch LANs by choosing centralized forwarding mode or local forwarding mode.

    Client access to local resources in case of WAN or AC failure and the AC escape function.

    Communication between an AC and APs in a private network through NAT.

    Hardware specifications

    Item

    Specification

    Dimensions (H × W × D)

    88.1 × 440 × 480 mm (3.47 × 17.32 × 18.90 in)

    Weight (full configuration)

    12.86 kg (28.35 lb)

    Throughput

    100Gbps

    Ports

    8 × GE ports

    12 × SFP/SFP+ ports

    4 × QSFP+ ports

    1 × console port

    1 × OOBM port

    1 × USB port

    Power supply

    Removable AC or DC power modules

    Support for 1+1 power module redundancy

    (Power module should be purchased separately.)

    Maximum power consumption

    < 300 W

    Temperature

    Operating temperature: 0°C to +45°C (+32°F to +113°F)

    Storage temperature: –40°C to +70°C (–40°F to +158°F)

    Relative humidity (non-condensing)

    Operating and storage humidity: 5% to 95%

    Safety standards

    UL 60950-1

    CAN/CSA C22.2 No 60950-1

    IEC 60950-1

    EN 60950-1/A11

    AS/NZS 60950

    EN 60825-1

    EN 60825-2

    EN60601-1-2

    FDA 21 CFR Subchapter J

    EMC standards

    ETSI EN 300 386 V1.3.3:2005

    EN 55024: 1998+ A1: 2001 + A2: 2003

    EN 55022 :2006

    VCCI V-3:2007

    ICES-003:2004

    EN 61000-3-2:2000+A1:2001+A2:2005

    EN 61000-3-3:1995+A1:2001+A2:2005

    AS/NZS CISPR 22:2004

    FCC PART 15:2005

    GB 9254:1998

    GB/T 17618:1998

    MTBF

    ≥ 50, 000 hours

    Software specifications

    Item

    Specification

    Basic capabilities

    Supported APs without license

    0

    License type

    1/4/8/16/32/64/128/512/1024

    Max. manageable number of APs

    6000

    Max. configurable number of APs

    24000

    Max. manageable number of wireless users

    60000

    802.11 MAC

    802.11 protocol suite

    Hide SSID

    802.11g protection

    802.11n only

    Client quantity limit

    SSID-based client quantity limit

    Radio-based client quantity limit

    Online client detection

    Automatic client aging

    Multi-country code

    User isolation

    VLAN-based user isolation

    SSID-based user isolation

    20 MHz/40 MHz auto-switch in 40 MHz mode

    Local forwarding

    Local forwarding based on SSID+VLAN

    CAPWAP

    Auto AP

    AC discovery (DHCP option 43 and DNS)

    IPv6 tunnel

    Network synchronization

    Jumbo frame forwarding

    AP preprovisioning

    AP basic network settings such as static IP, VLAN, and AC's IP address

    NAT traversal between AP and AC

    Roaming

    Intra-AC Layer 2 and Layer 3 roaming

    Inter-AC Layer 2 and Layer 3 roaming

    Access control

    Open system, shared key authentication

    WEP-64/128, dynamic WEP

    WPA, WPA2,WPA3

    TKIP

    CCMP (802.11n recommended)

    WAPI (optional)

    SSH1.5/2.0

    Wireless End-point Access Domination (EAD)

    Oasis cloud authentication

    Portal authentication

    Transparent authentication, remote or external server

    Portal webpage redirection

    SSID-based portal webpage redirection

    AP-based portal webpage redirection

    Portal by-pass proxy

    802.1X authentication

    EAP-TLS, EAP-TTLS, EAP-PEAP, EAP-MD5, EAP-SIM, LEAP, EAP-FAST, EAP offload (TLS, PEAP only)

    Local authentication

    802.1X, portal authentication, MAC authentication

    LDAP authentication

    Portal access

    802.1X access with EAP-GTC or EAP-TLS

    AP-based access control

    Guest access control

    VIP tunnel

    ARP anti-attack

    Wireless SAVI

    SSID anti-spoofing

    Username and SSID binding

    Domain- and SSID-based AAA server selection

    AAA server backup

    Local AAA server for wireless clients

    TACACS+

    QoS

    Priority mapping

    Layer 2 to Layer 4 traffic classification

    Rate limit

    Granularity of 8 Kbps

    802.11e/WMM

    User profile-based access control

    Intelligent bandwidth limit (equal bandwidth share algorithm)

    Intelligent bandwidth limit (user specific)

    Intelligent bandwidth guarantee

    Free flow for packets coming from every SSID when traffic is not congested, and minimum bandwidth specified for each SSID when traffic is congested

    QoS optimization for SVP phone

    Call Admission Control (CAC)

    CAC based on client quantity or bandwidth

    End-to-end QoS

    Coupled with H3C WLAN APs, the AC can identify variety of applications and policy control can be implemented including priority adjustment, scheduling, blocking, and rate limiting on users

    AP uplink rate limit

    WLAN radio resource management (RRM)

    Country code lock

    Static channel and power configuration

    Dynamic channel and power configuration

    Transmit power control (TPC)

    Coverage hole detection and correction

    Load balancing mode

    Traffic-based load balancing

    Session-based load balancing

    Radio group based load balancing (dual-band supported)

    Intelligent load balancing

    AP load balancing group

    Auto-discovery and flexible setting

    Security

    Static blacklist

    Dynamic blacklist

    Whitelist

    Rogue AP detection

    Rogue AP detection based on SSID, BSSID, or device OUI

    Countermeasures against rogue APs

    Anti-flooding

    Anti-spoofing

    Anti-weak IV attack

    WIPS

    7-layer mobile security protection

    Layer 2 protocols

    ARP proxy

    802.1p

    802.1q

    802.1X

    Broadcast storm suppression

    IP protocols

    IPv4

    Native IPv6

    IPv6 SAVI

    IPv6 Portal

    Multicast

    MLD Snooping

    IGMP Snooping

    Number of multicast groups

    256

    Multicast-to-unicast conversion (IPv4/IPv6)

    Support for unicast threshold setting

    Backup

    1+1, N+1, N+N AC backup

    Support for license sharing

    AP load balancing

    Remote AP

    Network management and configuration

    Management

    WEB, SNMPv1/v2/v3, RMON

    Configuration

    Web, CLI, Telnet, FTP

    Wireless location

    CUPID location

    Wireless Gateway

    VPN

    IPSEC, GRE

    NAT, NPAT

    Power save

    Scheduled radio shutdown

    Scheduled wireless service shutdown

    Per-packet power control (PPC)

    WLAN application

    RF Ping

    Remote probing and analysis

    RealTime Spectrum Guard (RTSG)

    Wireless Intelligent Application Aware (wIAA)

    Based on stateful firewall

    Packet forwarding fairness scheduling

    802.11n packet forwarding suppression

    Connection status-based traffic shaping

    AP channel sharing

    AP channel reusing

    Radio transmission rate adjustment algorithm

    Ignore packets with low RSSI

    Forbid clients with low RSSI from accessing a WLAN

    Forbid multicast buffering

    Blink status detection

    Product ID

    Product Description

    EWP-WX5860H-GL

    H3C WX5860H Access Controller

    PSR650B-12A1-GL

    650W AC Power Module

    PSR650B-12D1-GL

    650W DC Power Module

    LIS-WX-1-BE

    Enhanced Access Controller License, 1 AP, for V7

    LIS-WX-4-BE

    Enhanced Access Controller License,4 APs, for V7

    LIS-WX-8-BE

    Enhanced Access Controller License,8 APs, for V7

    LIS-WX-16-BE

    Enhanced Access Controller License,16 APs, for V7

    LIS-WX-32-BE

    Enhanced Access Controller License,32 APs, for V7

    LIS-WX-64-BE

    Enhanced Access Controller License,64 APs, for V7

    LIS-WX-128-BE

    Enhanced Access Controller License,128 APs, for V7

    LIS-WX-512-BE

    Enhanced Access Controller License,512 APs, for V7

    LIS-WX-1024-BE

    Enhanced Access Controller License,1024 APs, for V7

    SFP-XG-LX-SM1310-E

    SFP+ Module(1310nm,10km,LC)

    SFP-XG-SX-MM850-E

    SFP+ Module(850nm,300m,LC)

    SFP-GE-SX-MM850-A

    1000BASE-SX SFP Transceiver, Multi-Mode (850nm, 550m, LC)

    SFP-GE-LX-SM1310-A

    1000BASE-LX SFP Transceiver, Single Mode (1310nm, 10km, LC)

    SFP-FE-SX-MM1310-A

    100BASE-FX SFP Transceiver, Multi-Mode (1310nm, 2km, LC)

    SFP-FE-LX-SM1310-A

    100BASE-LX SFP Transceiver, Single Mode (1310nm, 15km, LC)

    Are you an H3C partner? Log in to see additional resources.
    You can find excellent H3C partners, or you can become one of them to build a
    partnership with H3C and share success together.
    Contact Sales