H3C S6860 Series Data Center Switches

HomeProducts & TechnologyEnterprise ProductsSwitchesH3C S6860 Series Data Center Switches
S6860-30HF front panel
S6860-30HF rear panel
S6860-54HF front panel
S6860-54HF rear panel
S6860-54HT front panel
S6860-54HT rear panel

S6860 series switch is H3C self-developed intelligent data centers switch with abundant data center features and IPv6 forwarding capability. The series provides flexible combination of 10GE, 40GE and 100GE ports with high port-density. With its modular dual power supply and fan trays design, S6860 provides a high redundant framework.

The switch is suitable for high-density 10GE switching or 40GE/100GE aggregation at data centers and cloud computing networks. It can also operate as a TOR access switch in an overlay or converged network.

The S6860 switch series includes the following models:

S6860-30HF—Provides 24 × 1/10G SFP Plus ports, 6 × QSFP+ ports or 2 × QSFP28 ports (each QSFP+ port can be split into 4 × 10GE ports), 2 × power module slots, 4 × fan tray slots, 2 × out-of-band management ports, 1 × mini USB port and 1 × USB port.

S6860-54HF—Provides 48 × 10G SFP+ Plus ports, 6 × QSFP+ ports or 2 × QSFP28 ports (each QSFP+ port can be split into 4 × 10GE ports), 2 × power module slots, 4 × fan tray slots, 2 × out-of-band management ports, 1 × mini USB port and 1 × USB port.

S6860-54HT—Provides 48 × 10G Base-T ports, 6 × QSFP+ ports or 2 × QSFP28 ports (each QSFP+ port can be split into 4 × 10GE ports), 2 × power module slots, 5 × fan tray slots, 2 × out-of-band management ports, 1 × mini USB port and 1 × USB port.

  • Warranty Information

    H3Care CT Foundation Basic 9X5 NBD-Ship Service(1Y)

  • Intelligent Resilient Framework 2 (IRF2)

    * H3C S6800 switch series is pre-built with Intelligent Resilient Framework 2 (IRF2). IRF2 provides the following benefits:

    * High scalability: With IRF2, plug-n-play device aggregation can be achieved by adding one or more switches into the IRF2 stack and enabling IRF2 stacking on the new device. New devices can be managed with a single IP, and upgraded at the same time to reduce network expansion cost.

    * High reliability: The IRF2 patented 1:N backup technology allows each slave device in the IRF2 stack to serve as the backup of the master, creating control and data link redundancy, as well as uninterrupted layer-3 forwarding. This improves the reliability, avoids unplanned business downtime and serves to improve overall performance. When the master device fails, traffic remains uninterrupted.

    * Load balancing: IRF2 supports cross-device link aggregation, upstream and downstream can be connected to more than one physical link, which creates another layer of network redundancy and boosts the network resource utilization.

    * Availability: H3C Implements IRF2 through standard Forty Gigabit Ethernet (40GE) or Ten Gigabit Ethernet (10GE) ports which allocates bandwidth for business and application access and reasonably splits local traffic and upstream traffic. IRF2 rules can not only be obeyed within and across the rack, but also across the LAN.

    Abundant Data Center Features

    * The switch supports abundant data center features, including:

    * EVB—The switch realizes the traffic forwarding between virtual machines (VM) and solves the connection and management boundary between the VM and the network via Virtual Ethernet Port Aggregator (VEPA) mode.

    * TRILL—Helps set up a large, resilient, high-performance Layer 2 network with support for long-distance VM mobility and data mobility.

    * VXLAN—The switch can operate as a high-performance VXLAN hardware gateway to support multitenant data center services. In conjunction with the H3C cloud management platform, the switch can be used to set up an agile, resilient, highly available high-performance Layer 2 network, with support for long-distance virtual machine mobility, data mobility, and business continuity.

    * FCoE—Allows transmission of FC packets over Ethernet so that FC SAN services and LAN services can run over the same network infrastructure.

    * PFC, ETS, and DCBX—Helps provide FC storage and high-performance computing services with low-latency and no data loss.

    Flexible choice of airflow

    * To cope with data center cooling aisle design, the H3C S6800 switch series comes with flexible airflow design, which features bi-cooling aisles in the front and back. Users may also choose the direction of airflow (from front to back or vice versa) by selecting a different fan tray.

    Abundant QoS

    * The switch provides abundant QoS features, including:

    * Packet filtering based on packet header fields from Layer 2 through Layer 4.

    * Traffic classification by source MAC, destination MAC, source IP, destination IP, TCP/UDP port number, protocol type, and VLAN.

    High Availability

    * The switch uses removable power modules and allows you to select AC or DC power modules as required. The power modules available for the switch have a self-protection mechanism to prevent overcurrent, overvoltage, and over temperature conditions. The switch can detect faults in power modules and fan trays and will generate an alarm when a fault occurs.

    * The switch supports diverse link redundancy technologies such as H3C proprietary RRPP, VRRPE, and Smart Link. These technologies ensure quick network convergence even when large amount of traffic of multiple services runs on the network.

    Outstanding Management Capacity

    The switch improves system management through the following ways:

    * Provides multiple management interfaces, including the console port, mini USB port, USB port, and two out-of-band management ports.

    * Supports configuration and management from CLI or a mainstream network management platform and H3C IMC Intelligent Management Center.

    * Supports multiple access methods, including SNMPv1/v2c/v3, Telnet, SSH 2.0, SSL, and FTP.

    * Supports standard NETCONF APIs that allow users to configure and manage the switch, enhancing the compatibility with third-party applications.

    * Provides a variety of traffic monitoring and analytic tools, including sFlow, NetStream, SPAN/RSPAN/ERSPAN mirroring, and port mirroring to help customers perform precise traffic analysis and gain visibility into network application traffic. With these tools, customers can collect network traffic data to evaluate network health status, create traffic analysis reports, perform traffic engineering, and optimize resource allocation.

    Comprehensive Security Control Policies

    * The switch supports AAA authentications (including RADIUS authentication) and dynamic or static binding of user identification elements such as user account, IP address, MAC address, VLAN ID, and port number. Using the switch in conjunction with H3C IMC, you can manage and monitor online users in real time and take prompt action on illegitimate behaviors.

    * The switch offers a large number of inbound and outbound ACLs and VLAN-based ACL assignment. This simplifies user configuration while saving ACL resources.

    Hardware Specification

    Item

    S6860-30HF

    S6860-54HF

    S6860-54HT

    Dimensions

    (H × W × D)

    44 × 440 × 400 mm

    (1.73 × 17.32 × 15.75 in)

    44 × 440 × 400 mm

    (1.73 × 17.32 × 15.75 in)

    44 × 440 × 460 mm

    (1.73 × 17.32 × 18.11 in)

    Weight

    ≤ 10 kg (22.05 lb)

    Console port

    1

    Out-of-band management port

    One GE copper port and one GE fiber port

    Mini USB port

    1

    SFP Plus port

    24

    48

    N/A

    10GBase-T port

    N/A

    N/A

    48

    QSFP+ port

    Max. 6

    QSFP28 port

    Max. 2

    AC-input voltage

    90 VAC to 290 VAC

    DC-input voltage

    –36 VDC to –72 VDC

    Power module

    2

    Fan tray

    4

    5

    Air flow direction

    From front to rear or from rear to front

    Operating temperature

    0°C to 45°C (32°F to 113°F)

    Operating humidity

    10% to 90%, noncondensing

    Software Specification

    Item

    S6860-30HF

    S6860-54HF

    S6860-54HT

    Line-rate switching

    Switching capacity

    960Gbps

    1.44 Tbps

    1.44 Tbps

    Forwarding capacity

    720Mpps

    720 Mpps

    720 Mpps

    Forwarding mode

    Store-forward and cut-through modes

    Virtualization

    IRF2

    Distributed device management, distributed link aggregation, and distributed resilient routing

    Using standard Ethernet interfaces for IRF connection

    Setting up an IRF fabric by using IRF member devices in the same site or geographically dispersed

    Link aggregation

    10GE/40GE port aggregation

    Static aggregation, dynamic aggregation

    Link cross board aggregation, cross device link aggregation M-LAG

    Data center

    VXLAN Layer 2 gateway, VXLAN Layer 3 gateway

    EVPN distributed gateway

    802.1Qbb PFC, 802.1Qaz ETS, ECN

    QCN, ETS, DCBX

    FCOE

    MAC & ARP assignment on demand

    EVB (VEB, VEPA, Muti-channel three modes)

    TRILL/TRILL & IRF

    SPB

    Netconf, python

    Service chain

    OpenFlow

    Telemetry

    Multiple Openflow controller

    Jumbo Frame

    Supported

    MAC address table

    Static MAC address

    Blackhole MAC address

    VLAN

    Port-based VLAN (quantity: 4094)

    Super VLAN

    MAC VLAN

    Basic QinQ, flexible QinQ

    Traffic monitoring

    sFlow

    DHCP

    DHCP server/client

    DHCP snooping/DHCP relay

    DHCP snooping support for Option 82/DHCP relay agent support for Option 82

    ARP

    Gratuitous ARP

    Dynamic ARP inspection

    ARP anti-attack

    ARP source-suppression

    ARP detection

    IP routing

    Stating routing, RIPv1/v2, OSPFv1/v2/v3, BGP, IS-IS

    ECMP, VRRP, policy-based routing

    BGP4+ for IPv6, VRRP, IPv6 policy-based routing

    IPV6

    IPv6 ND

    IPv6 PMTU

    ICMPv6, Telnetv6, SFTPv6, SNMPv6, BFDv6, VRRPv3

    IPv6 portal/IPv6 tunnel

    Multicast

    IGMP snooping v2/v3

    IGMPv1/v2/v3

    PIM-DM/SM

    IPv6 PIM-DM/SM/SSM

    BIDIR-PIM, MSDP

    MLD snooping

    Multicast policy

    Zero-configuration

    Auto-config and config rollback

    MPLS

    MCE

    MPLS VPN, VPLS

    MSTP

    STP/RSTP/MSTP

    PVST+/RPVST+

    STP root guard

    BPDU guard

    RPR

    RRPP, Smart Link

    QoS/ACL

    Inbound and outbound traffic rate limit

    CAR

    Eight output queues on each port

    Flexible port-and queue-based queuing and scheduling algorithms

    SP, WRR, WFQ, SP+WRR, and SP+WFQ queuing

    802.1p and DSCP priority marking

    Packet filtering at Layer 2 to Layer 4

    Traffic classification based on source MAC address, destination MAC address, source IPv4/IPv6 address, destination IPv4/IPv6 address, port number, protocol type, and VLAN

    Time range

    WRED

    Mirroring

    Traffic mirroring

    N:4 port mirroring

    Local port mirroring, remote port mirroring

    Security

    Hierarchical user management and password protection

    AAA (RADIUS/HWTACACS)

    SSH 2.0

    IP address, MAC address, and port number binding

    IP source guard

    HTTPS/SSL

    PKI

    Loading and upgrading

    Loading/upgrading through the XMODEM protocol

    Loading/upgrading through FTP and TFTP

    Management and maintenance

    Configuration at the CLI

    Telnet configuration

    Configuration through the console port

    RMON, Event log

    SNMPv1/v2c/v3

    IMC

    NETCONF configuration

    System logs

    Hierarchical alarms

    NTP, SNTP

    Power module status alarming

    Fan tray status alarming

    Temperature alarming

    Debugging information output

    Ping and tracert

    File uploading and downloading through the USB port

    EMC

    FCC Part15 SubpartB CLASS A

    ICES-003 CLASS A

    VCCI CLASS A

    CISPR 32 CLASS A

    EN 55032 CLASS A

    AS/NZS CISPR32 CLASS A

    CISPR 24

    EN 55024

    EN 61000-3-2

    EN 61000-3-3

    ETSI EN 300 386

    GB/T 9254

    YD/T993

    Safety

    UL 60950-1

    CAN/CSA C22.2 No 60950-1

    IEC 60950-1

    EN 60950-1

    AS/NZS 60950-1

    FDA 21 CFR Subchapter J

    GB 4943.1

    PID

    Description

    LS-6860-30HF

    H3C S6860-30HF L3 Ethernet Switch with 24 SFP Plus Ports and 6 QSFP Plus or 2 QSFP28 Ports

    LS-6860-54HF

    H3C S6860-54HF L3 Ethernet Switch with 48 SFP Plus Ports and 6 QSFP Plus or 2 QSFP28 Ports

    LS-6860-54HT

    H3C S6860-54HT L3 Ethernet Switch with 48 10GBASE-T Ports and 6 QSFP Plus or 2 QSFP28 Ports

    Power

     

    PSR250-12A

    250W AC Power Supply Module

    PSR250-12A1

    250W AC Power Supply Module

    PSR450-12A1

    450W AC Power Supply Module

    PSR450-12A

    450W AC Power Supply Module

    PSR450-12AHD

    450W AC Power Supply Module,Support 240V/336V HVDC Input

    PSR450-12D

    450W DC Power Supply Module

    Fan

     

    LSPM1FANSA

    Ethernet Switch Fan Module(Power to Port Airflow)

    LSPM1FANSB

    Ethernet Switch Fan Module(Port to Power Airflow)

    Transceiver

     

    SFP-FE-SX-MM1310-A

    100BASE-FX SFP Transceiver, Multi-Mode (1310nm, 2km, LC)

    SFP-FE-LX-SM1310-A

    100BASE-LX SFP Transceiver, Single Mode (1310nm, 15km, LC)

    SFP-FE-LH40-SM1310

    100BASE-LH40 SFP Transceiver, Single Mode (1310nm, 40km, LC)

    PID

    Description

    SFP-GE-T

    1000BASE-T SFP

    SFP-GE-SX-MM850-A

    1000BASE-SX SFP Transceiver, Multi-Mode (850nm, 550m, LC)

    SFP-GE-LX-SM1310-A

    1000BASE-LX SFP Transceiver, Single Mode (1310nm, 10km, LC)

    SFP-GE-LH40-SM1310

    1000BASE-LH40 SFP Transceiver, Single Mode (1310nm, 40km, LC)

    SFP-GE-LH40-SM1550

    1000BASE-LH40 SFP Transceiver, Single Mode (1550nm, 40km, LC)

    SFP-GE-LH80-SM1550

    1000BASE-LH80 SFP Transceiver, Single Mode (1550nm, 80km, LC)

    SFP-XG-SX-MM850-A

    SFP+ Module(850nm,300m,LC)

    SFP-XG-LX-SM1310

    SFP+ Module(1310nm,10km,LC)

    QSFP-40G-LR4-WDM1300

    40GBASE-LR4 QSFP+ Optical Transceiver Module

    QSFP-40G-CSR4-MM850

    QSFP+ 40GBASE Optical Transceiver Module (850nm,300m,CSR4,Support 40G to 4*10G)

    QSFP-40G-SR4-MM850

    QSFP+ 40GBASE Optical Transceiver Module (850nm,100m,SR4,Support 40G to 4*10G)

    QSFP-40G-BIDI-SR-MM850

    QSFP+ 40GBASE BIDI Optical Transceiver Module (850nm,100m,SR)

    QSFP-40G-LR4L-WDM1300

    QSFP+ 40GBASE Optical Transceiver Module (1310nm,2km,LR4L,LC)

    QSFP-40G-LR4-PSM1310

    QSFP+ 40GBASE Optical Transceiver Module (1310nm,10km,MPO/APC,LR4,Parallel Single Mode)

    QSFP-100G-SR4-MM850

    100G QSFP28 Optical Transceiver Module (850nm,100m OM4,SR4,MPO)

    QSFP-100G-PSM4-SM1310

    100G QSFP28 Optical Transceiver Module (1310nm,500m,PSM4,MPO/APC)

    QSFP-100G-LR4L-WDM1300

    100G QSFP28 Optical Transceiver Module (1310nm,2km,LR4L,CWDM4,LC)

    QSFP-100G-LR4-WDM1300

    100G QSFP28 Optical Transceiver Module(1310nm,10km,LR4,WDM,LC)

    Cable

     

    LSWM1STK

    SFP+ Cable 0.65m

    LSWM2STK

    SFP+ Cable 1.2m

    LSWM3STK

    SFP+ Cable 3m

    LSTM1STK

    SFP+ Cable 5m

    LSWM1QSTK0

    40G QSFP+ Cable 1m

    LSWM1QSTK1

    40G QSFP+ Cable 3m

    LSWM1QSTK2

    40G QSFP+ Cable 5m

    LSWM1QSTK3

    40G QSFP+ to 4x10G SFP+ Cable 1m

    LSWM1QSTK4

    40G QSFP+ to 4x10G SFP+ Cable 3m

    LSWM1QSTK5

    40G QSFP+ to 4x10G SFP+ Cable 5m

    QSFP-100G-D-CAB-1M

    100G QSFP28 to 100G QSFP28 1m Passive Cable

    QSFP-100G-D-CAB-3M

    100G QSFP28 to 100G QSFP28 3m Passive Cable

    QSFP-100G-D-CAB-5M

    100G QSFP28 to 100G QSFP28 5m Passive Cable

    License

     

    LIS-S6800-DC

    H3C S6800 Data Center License

    FCoE, FC, SPB, Trill, EVB require a software license. Only one license is required even if multiple features are installed on the switch.

    Are you an H3C partner? Log in to see additional resources.
    You can find excellent H3C partners, or you can become one of them to build a
    partnership with H3C and share success together.