H3C S5130S-LI Series Simplified Gigabit Access Switches

HomeProducts & TechnologyEnterprise ProductsSwitchesH3C S5130S-LI Series Simplified Gigabit Access Switches
H3C S5130S-LI

As Gigabit speed Layer 2 Ethernet switch, H3C S5130S-LI is the second generation intelligent managed switches designed for networks requiring high performance, high port density, high uplink bandwidth and easy to use.

H3C S5130S-LI series switch offers Gigabit connectivity and high bandwidth with10/100/1000 autosensing ports and 10G SFP+ uplink.

H3C S5130S-LI series switch includes two models as follows:

S5130S-28S-LI: 24-port 10/100/1000TX Ethernet, 4-port SFP+;

S5130S-52S-LI: 48-port 10/100/1000TX Ethernet, 4-port SFP+;

  • Warranty Information

    Limited Lifetime Warranty Basic 9x5 10BD-Ship service(5Y)

  • Abundant service capabilities

    H3C S5130S-LI switch series supports Internet broadband access, offers Gigabit access and 10G uplink for small to medium sized enterprises. It supports rich features such as Jumbo Frame, 802.1X, MAC authentication, Port security, LACP, 4K VLAN, 16K MAC and Black Hole MAC, etc. and abundant functions such as port-based priority mapping of layer 2 and layer 3, port-based mirror, redirection, port isolation, access control, port speed limit and rich IPV6 features, etc.

    Intelligent Resilient Framework 2 (IRF2)

    H3C S5130S-LI switch series is pre-built with Intelligent Resilient Framework 2 (IRF2). IRF2 provides the following benefits:

    High scalability: With IRF2, plug-n-play device aggregation can be achieved by adding one or more switches into the IRF2 stack and enabling IRF2 stacking on the new device. New devices can be managed with a single IP, and upgraded at the same time to reduce network expansion cost.

    High reliability: The IRF2 patented 1: N backup technology allows each slave device in the IRF2 stack to serve as the backup of the master, creating control and data link redundancy, as well as uninterrupted layer-3 forwarding. This improves the reliability, avoids unplanned business downtime and serves to improve overall performance. When the master device fails, traffic remains uninterrupted.

    Load balancing: IRF2 supports cross-device link aggregation, upstream and downstream can be connected to more than one physical link, which creates another layer of network redundancy and boosts the network resource utilization.

    Availability: H3C Implements IRF2 through standard Gigabit Ethernet (1GE) ports or Ten Gigabit Ethernet (10GE) ports which allocates bandwidth for business and application access and reasonably splits local traffic and upstream traffic. IRF2 rules not only able to obey within and across the rack, but also across the LAN.

    Comprehensive security control policies

    H3C S5130S-LI switch series supports innovative single-port multi-authentication function, the access authentication modes supported by different clients are different. For example, some clients can only perform MAC addresses Authentication (such as the printer terminal), and some user host for 802.1X authentication, and some user hosts only want to access through the Web portal authentication. In order to flexibly adapt to the multi-authentication requirements of the network environment, the S5130S-LI switch series support single-port multi-authentication unified deployment.

    ARP attack and ARP virus are major threats to LAN security, so the S5130S-LI switch series comes with diverse ARP protection functions such as ARP Detection to challenge the legitimacy of client, validate the ARP packets, and set a speed limit for ARP to prevent ARP swarm attacks from targeting CPU.

    H3C S5130S-LI switch series support EAD (End User Admission Domination) function. Once working with the iMC (intelligent Management Centre) system, EAD integrates terminal security policies, such as anti-virus and patch update, into network access control and access right control policies to form a cooperative security system. By checking, isolating, updating, managing, and monitoring access terminals, EAD changes passive, single point network protection to active, comprehensive network protection, and changes separate management to centralized management, enhancing the network capability for preventing viruses, worms, and new threats.

    Abundant QoS policies

    The S5130S-LI switch series supports packet filtering at Layer 2 through Layer 4, and traffic classification based on source MAC addresses, destination MAC addresses, source IP addresses, destination IP addresses, TCP/UDP port numbers, protocol types, and VLANs. It supports flexible queue scheduling algorithms based on ports and queues, including strict priority (SP), weighted round Robin (WRR) and SP+WRR. The S5130S-LI switch series enables committed access rate (CAR) with the minimum granularity of 8 kbps. It supports port mirroring in the outbound and inbound directions, to monitor the packets on the specific ports, and to mirror the packets to the monitor port for network detection and troubleshooting.

    Excellent manageability

    The H3C S5130S-LI switch series makes switch management with ease with the support of SNMPv1/v2/v3, which can be managed by NM platforms, such as Open View and iMC. With CLI and Telnet switch management is made easier. And with SSH 2.0 encryption, switch management security is enhanced.

    Rich Layer 3 routing features.

    H3C S5130S-LI switch series supports static routing, RIP, RIPng, OSPF V1/V2/V3.

    Item

    S5130S-28S-LI

    S5130S-52S-LI

    Box switching capacity

    336Gbps

    Port switching capacity

    128Gbps

    176Gbps

    Packet forwarding rate

    96Mpps

    132Mpps

    Dimensions (H × W × D)

    43.6 × 440 × 160 mm

    43.6 × 440 × 230 mm

    Weight

    < 2.5 kg

    < 3.5 kg

    Console ports

    1

    Service ports

    24-port 10/100/1000Base-T

    4-port SFP+

    48-port 10/100/1000Base-T

    4-port SFP+

    Maximum Stacking bandwidth

    80Gbps

    MAX Stack num

    9

    Input voltage range

    100 VAC to 240 VAC @ 50 Hz/60 Hz

    Power consumption

    MIN AC: 10W

    MAX AC: 24W

    MIN AC: 19W

    MAX AC: 44W

    Operating temperature

    0ºC to 45ºC

    Operating humidity

    10% RH to 90% RH, non-condensing

    Stacking

    Intelligent Resilient Framework 2 (IRF2)

    Link aggregation

    GE/10GE port aggregation

    Static aggregation

    Dynamic aggregation

    M-LAG

    Jumbo frame

    Supported

    MAC address table

    Blackhole MAC address

    MAC learning limit

    Flow control

    802.3x flow control and half-duplex backpressure

    VLAN

    Port-based VLAN

    QinQ

    Voice VLAN

    MAC VLAN

    ARP

    ARP Detection

    ARP speed limit

    ND

    Supported

    VLAN virtual port

    Supported

    DHCP

    DHCP Client

    DHCP Snooping

    DHCP Relay

    DHCP Server

    DHCP Option82

    DNS

    Static and Dynamic DNS

    IPV4 and IPV6

    Routing protocols

    IPV4/IPV6 static routing

    RIP/RIPng, OSPFV1/V2/V3

    Strom suppression

    Storm suppression based on port bandwidth percentage

    Storm suppression based on PPS

    Layer 2 ring network protocol

    STP/RSTP/MSTP

    STP Root Protection

    Smart Link

    RRPP

    Mirroring

    Flow mirroring

    Port mirroring

    QoS/ACL

    Packet filter

    Flexible queue scheduling algorithms based on ports and queues, including SP, WRR and SP+WRR

    Bidirectional ACL

    Port-based speed limit

    Flow redirection

    Time-range

    Layer 2 ring network protocol

    STP/RSTP/MSTP

    STP Root Protection

    Smart Link

    RRPP

    Security

    Hierarchical user management and password protection

    MAC-based authentication

    802.1X

    SSH2.0

    Port isolation

    IP source guard

    HTTPs

    EAD

    RADIUS authentication

    HWTACACS authentication

    Loading and upgrading

    Loading and upgrading through FTP/TFTP

    Management and maintenance

    Configuration from CLI

    Login through Telnet, and the console port

    Simple Network Management Protocol (SNMP)

    Remote Monitoring (RMON)

    IMC network management system

    WEB management

    System log

    Alarming based on severity

    IRF

    NTP

    Debugging information output

    Telnet-based remote maintenance

    NQA

    DLDP

    Virtual Cable Test

    IEEE

    IEEE 802.3x

    IEEE 802.3u,

    IEEE 802.3z,

    IEEE 802.3az,

    IEEE 802.3ab,

    IEEE 802.3ah

    IEEE 802.3ad

    IEEE 802.3af

    IEEE 802.3at

    IEEE 802.3bt

    IEEE 802.3bz

    IEEE 802.1p

    IEEE 802.1x

    IEEE 802.1q

    IEEE 802.1d

    IEEE 802.1w

    IEEE 802.1s

    IEEE 802.1ax

    IEEE 802.1ag

    Product ID

    Product Description

    LS-5130S-28S-LI-GL

    H3C S5130S-28S-LI L2 Ethernet Switch with 24*10/100/1000BASE-T Ports and 4*1G/10G BASE-X SFP Plus Ports,(AC)

    LS-5130S-52S-LI-GL

    H3C S5130S-52S-LI L2 Ethernet Switch with 48*10/100/1000BASE-T Ports and 4*1G/10G BASE-X SFP Plus Ports,(AC)

    Are you an H3C partner? Log in to see additional resources.
    You can find excellent H3C partners, or you can become one of them to build a
    partnership with H3C and share success together.