H3C S5120V2-LI Series Simplified Gigabit Access Switches
- H3C S5120V2-LI
H3C S5120V2-LI is the latest development of Gigabit Layer 2 access switch. It’s the second generation intelligent managed switches designed for networks requiring high performance, high port density and easy to use.
H3C S5120V2-LI series switch offers Gigabit connectivity with10/100/1000 autosensing ports and SFP optical uplink ports.
H3C S5120V2-LI series switch includes eight models as follows:
S5120V2-10P-LI：8 *10/100/1000TX+ 2*SFP
S5120V2-28P-LI：24 *10/100/1000TX+ 4*SFP
S5120V2-10P-PWR-LI：8 *10/100/1000TX+ 2*SFP
S5120V2-28P-PWR-LI：24 *10/100/1000TX+ 4*SFP
S5120V2-28P-HPWR-LI：24*10/100/1000 BASE-T + 4*SFP + 4*10/100/1000 BASE-T COMBO
*Warranty Information:Limited Lifetime Warranty Basic 9x5 10BD-Ship service（5Y）
Abundant service capabilities
H3C S5120V2-LI switch series supports Internet broadband access, offers Gigabit access and 10G uplink for small to medium sized enterprises. It supports rich features such as Jumbo Frame, 802.1X, MAC authentication, Port security, LACP, 4K VLAN, 16K MAC and Black Hole MAC, etc. and abundant functions such as port-based priority mapping of layer 2 and layer 3, port-based mirror, redirection, port isolation, access control, port speed limit and rich IPV6 features, etc.
Intelligent Resilient Framework 2 (IRF2)
H3C S5120V2-LI switch series is pre-built with Intelligent Resilient Framework 2 (IRF2). IRF2 provides the following benefits:
High scalability: With IRF2, plug-n-play device aggregation can be achieved by adding one or more switches into the IRF2 stack and enabling IRF2 stacking on the new device. New devices can be managed with a single IP, and upgraded at the same time to reduce network expansion cost.
High reliability: The IRF2 patented 1: N backup technology allows each slave device in the IRF2 stack to serve as the backup of the master, creating control and data link redundancy, as well as uninterrupted layer-3 forwarding. This improves the reliability, avoids unplanned business downtime and serves to improve overall performance. When the master device fails, traffic remains uninterrupted.
Load balancing: IRF2 supports cross-device link aggregation, upstream and downstream can be connected to more than one physical link, which creates another layer of network redundancy and boosts the network resource utilization.
Availability: H3C Implements IRF2 through standard Gigabit Ethernet (1GE) ports or Ten Gigabit Ethernet (10GE) ports which allocates bandwidth for business and application access and reasonably splits local traffic and upstream traffic. IRF2 rules not only able to obey within and across the rack, but also across the LAN.
Comprehensive security control policies
H3C S5120V2-LI switch series supports innovative single-port multi-authentication function, the access authentication modes supported by different clients are different. For example, some clients can only perform MAC addresses Authentication (such as the printer terminal), and some user host for 802.1X authentication, and some user hosts only want to access through the Web portal authentication. In order to flexibly adapt to the multi-authentication requirements of the network environment, the S5120V2-LI switch series support single-port multi-authentication unified deployment.
ARP attack and ARP virus are major threats to LAN security, so the S5120V2-LI switch series
comes with diverse ARP protection functions such as ARP Detection to challenge the legitimacy of client, validate the ARP packets, and set a speed limit for ARP to prevent ARP swarm attacks from targeting CPU.
H3C S5120V2-LI switch series support EAD (End User Admission Domination) function. Once working with the iMC (intelligent Management Centre) system, EAD integrates terminal security policies, such as anti-virus and patch update, into network access control and access right control policies to form a cooperative security system. By checking, isolating, updating, managing, and monitoring access terminals, EAD changes passive, single point network protection to active, comprehensive network protection, and changes separate management to centralized management, enhancing the network capability for preventing viruses, worms, and new threats.
Abundant QoS policies
The S5120V2-LI switch series supports packet filtering at Layer 2 through Layer 4, and traffic classification based on source MAC addresses, destination MAC addresses, source IP addresses, destination IP addresses, TCP/UDP port numbers, protocol types, and VLANs. It supports flexible queue scheduling algorithms based on ports and queues, including strict priority (SP), weighted round Robin (WRR) and SP+WRR. The S5120V2-LI switch series enables committed access rate (CAR) with the minimum granularity of 8 kbps. It supports port mirroring in the outbound and inbound directions, to monitor the packets on the specific ports, and to mirror the packets to the monitor port for network detection and troubleshooting.
The H3C S5120V2-LI switch series makes switch management with ease with the support of SNMPv1/v2/v3, which can be managed by NM platforms, such as Open View and iMC. With CLI and Telnet switch management is made easier. And with SSH 2.0 encryption, switch management security is enhanced.
Rich Layer 3 routing features
H3C S5120V2-LI switch series supports static routing, RIP, RIPng, OSPF V1/V2/V3.
Packet forwarding rate
Dimensions (H × W × D)
+4*10/100/ 1000 BASE-T Combo
Input voltage range
100 VAC to 240 VAC @ 50 Hz/60 Hz
AC: 100-240V @50/60Hz
MIN: 7W MAX: 12W
MIN: 9W MAX: 19W
MIN: 9W MAX: 23W
MIN: 18W MAX: 41W
MIN: 13W MAX:153W (PoE
MIN: 19W MAX: 240W(PoE
AC: 23W DC: 16W MAX:
(PoE 370W) DC:
AC: 36W DC: 26W MAX:
(PoE 370W) DC:
0ºC to 45ºC
10% RH to 95% RH, non-condensing
Intelligent Resilient Framework 2 (IRF2)
1G/10GE port aggregation
Multichassis link aggregation
MAC address table
Blackhole MAC Address MAC learning limit
802.3x flow control and half-duplex backpressure
Port-based VLAN QinQ
ARP speed limit
VLAN virtual port
Static and Dynamic DNS IPV4 and IPV6
IPV4/IPV6 static routing RIP/ RIPng, OSPFV1/V2/V3
IGMP Snooping V1/V2/V3
Storm suppression based on port bandwidth percentage Storm suppression based on PPS
Layer 2 ring network protocol
STP Root Protection
Flexible queue scheduling algorithms based on ports and queues, including SP, WRR and SP+WRR Bidirectional ACL
Port-based speed limit Flow redirection
Hierarchical user management and password protection MAC- based authentication
IP source guard
Loading and upgrading
Loading and upgrading through FTP/TFTP
Management and maintenance
Configuration from CLI
Login through Telnet, and the console port
Simple Network Management Protocol(SNMP)
Remote Monitoring (RMON)
IMC network management system
Alarming based on severity
Debugging information output
Telnet-based remote maintenance
Virtual Cable Test
H3C S5120V2-28P-LI L2 Ethernet Switch with 24*10/100/1000BASE-T Ports and 4*1000BASE-X Ports,(AC)
H3C S5120V2-52P-LI L2 Ethernet Switch with 48*10/100/1000BASE-T Ports and 4*1000BASE-X Ports,(AC)
H3C S5120V2-10P-PWR-LI L2 Ethernet Switch with 8*10/100/1000BASE-T PoE+ Ports(AC 125W), and 2*1000BASE-X SFP Ports,(AC)
H3C S5120V2-10P-LI L2 Ethernet Switch with 8*10/100/1000BASE-T Ports and 2*1000BASE-X SFP Ports,(AC)
H3C S5120V2-28P-HPWR-LI L2 Ethernet Switch with 24*10/100/1000BASE-T PoE+ Ports(AC 370W,DC 740W), 4*100/1000BASE-X Ports,
and 4*GE Combo Ports,(AC/DC)
H3C S5120V2-52P-PWR-LI L2 Ethernet Switch with 48*10/100/1000BASE-T PoE+ Ports(AC 370W,DC 740W) and 4*1000BASE-X SFP Ports,(AC/DC)
H3C S5120V2-20P-LI L2 Ethernet Switch with 16*10/100/1000BASE-T Ports and 4*1000BASE-X SFP Ports,(AC)
H3C S5120V2-28P-PWR-LI L2 Ethernet Switch with 24*10/100/1000BASE-T PoE+ Ports(AC 185W) and 4*1000BASE-X Ports,(AC)