Configure SR-IOV settings
Figure-1 SR-IOV configuration flow chart
Table-1 SR-IOV configuration workflow
|
Procedure |
Remarks |
|
Required. You must perform this task to enable IOMMU for a host before configuring SR-IOV for a physical NIC on the host. For the configuration to take effect, you must restart the host. |
|
|
Required. Perform this task to enable SR-IOV for a physical NIC and set the number of vNICs. H3C UIS Manager is compatible with multiple types of NICs and guest OSs that support SR-IOV. For more information, see "SR-IOV." |
|
|
Required. Perform this task to configure an SR-IOV NIC for a VM. Some functions of a VM configured with an SR-IOV NIC will become unavailable. For more information, see "SR-IOV." |