Perform this task to enable the system to send SMS notifications for alarms to the users.
For the system to send SMS notifications, you must also configure the SMS parameters. For more information, see "Configure SMS parameters."
Every alarm triggers an SMS notification. Please configure the alarm report interval properly in "Alarm thresholds" to reduce the loads on the SMS gateway.
From the navigation pane, select System > Alarms > Notifications > SMS.
Set alarm severity levels. Options include Critical, Major, Minor, and Tip.
Click Add Phone Number.
In the dialog box that opens, enter a phone number and click OK.
Click SMS Settings.
In the dialog box that opens, configure the following parameters.
SMS: Set whether to enable SMS notifications.
SMS Type: Select a platform to send the SMS messages. Options include Jixintong SMS Platform, and Common SMS Platform. The Jixintong SMS platform is a third-party SMS platform and requires separate registration and deployment. For more information, access the official website of Jixintong.
Configure the following parameters if you select Jixintong SMS Platform as the SMS type:
Login Password: Enter the password for logging in to the Jixintong SMS platform.
HTTP Proxy: Set whether to enable HTTP proxy. If you enable HTTP proxy, you need to configure proxy address, proxy port, proxy username, and proxy password.
Configure the following parameters if you select Common SMS Platform as the SMS type:
IP Address: Enter the IP address of the common SMS platform.
Login Name: Enter the name for logging in to the common SMS platform.
Login Password: Enter the password for logging in to the common SMS platform.
HTTP Proxy: Set whether to enable HTTP proxy. If you enable HTTP proxy, you must configure the proxy address, proxy port, proxy username, and proxy password.
Click Save.
Click SMS Test to verify the SMS notification settings.
Click Save.
Click the Indicators tab to select alarm thresholds and alarm sources.
Alarm Thresholds: Select the types of alarms to be monitored. Options include All and Selected. The default value is All.
Alarm Sources: Select the hosts and VMs to be monitored.
Click Save.
From the navigation pane, select System > Alarms > Notifications > SMS.
Perform either of the following tasks:
Click Remove All above the configured phone number list.