1 Login

Introduces the commands used for logging into the Ethernet switch.

2 VLAN

Introduces the commands used for configuring VLAN, Voice VLAN, and GVRP.

3 IP Addressing and Performance

Introduces the commands used for configuring IP address and IP performance.

4 QinQ-BPDU Tunneling

Introduces the commands used for configuring QinQ and BPDU Tunneling.

5 Port Correlation Configuration

Introduces the commands used for basic port configuration and port isolation configuration.

6 Link Aggregation

Introduces the commands used for link aggregation.

7 MAC Address Table Management

Introduces the commands used for configuring MAC address forwarding table.

8 IP Source Guard

Introduces the commands used for configuring MAC address, IP address and port binding.

9 MSTP

Introduces the commands used for configuring STP and BRDU tunnel.

10 IP Routing Overview

Introduces the commands used for displaying IP routing tables.

11 IPv4 Routing

Introduces the commands used for configuring IPv4 routing, static routing, RIP, OSPF, IS-IS, BGP, and route policy.

12 IPv6 Routing

Introduces the commands used for configuring IPv6 routing, static routing, RIPng, OSPFv3, IS-ISv6, and BGP4+.

13 IPv6 Configuration

Introduces the commands used for configuring IPv6 application, IPv6 tunneling, and so on.

14 Multicast

Introduces the commands used for configuring  IGMP Snooping, MLD Snooping, multicast VLAN, multicast policy, IGMP, PIM-DM, PIM-SM, and MSDP.

15 802.1x-MAC Authentication

Introduces the commands used for 802.1x and MAC address authentication related configurations.

16 AAA RADIUS HWTACACS

Introduces the commands used for AAA, RADIUS, HWTACACS, and the related configurations.

17 Portal

Introduces the commands used for portal.

18 ARP

Introduces the commands used for ARP and the related configuration.

19 DHCP

Introduces the commands used for DHCP and the related configuration.

20 ACL

Introduces the commands used for IPv4&IPv6-based ACL and the related configuration.

21 QoS

Introduces the commands used for QoS and the related configuration.

22 Port Mirroring

Introduces the commands used for port mirroring and the related configuration.

23 SNMP-RMON

Introduces the commands used for the configuration to manage network devices through SNMP and RMON.

24 NTP

Introduces the commands used for NTP and the related configuration.

25 DNS

Introduces the commands used for DNS and the related configuration.

26 File System Management

Introduces the commands used for file system management.

27 Information Center

Introduces the commands used for the configuration to analyze and diagnose networks using the information center.

28 System Maintaining and Debugging

Introduces the commands used for daily system maintenance and debugging.

29 HA

Introduces the commands used for VRRP, HA and the related configuration.

30 SSH

Introduces the commands used for SSH and the related configuration.

31 PoE

Introduces the commands used for PoE.

32 RRPP

Introduces the commands used for RRPP.

33 Appendix

Lists all the commands described in this command manual in an alphabetic order. The parts and pages where the commands are described are also given.