H3C S5500-EI Series Switches Command Manual-Release 2102(V1.01)

Manual Version

20071120-C-1.01

Organization

H3C S5500-EI Series Ethernet Switches Command Manual is organized as follows:

Part

Contents

1 Login

Introduces the commands used for logging into the Ethernet switch.

2 VLAN

Introduces the commands used for configuring VLAN, Voice VLAN, and GVRP.

3 IP Addressing and Performance

Introduces the commands used for configuring IP address and IP performance.

4 QinQ-BPDU Tunneling

Introduces the commands used for configuring QinQ and BPDU Tunneling.

5 Port Correlation Configuration

Introduces the commands used for basic port configuration and port isolation configuration.

6 Link Aggregation

Introduces the commands used for link aggregation.

7 MAC Address Table Management

Introduces the commands used for configuring MAC address forwarding table.

8 IP Source Guard

Introduces the commands used for configuring MAC address, IP address and port binding.

9 DLDP

Introduces the commands used for DLDP and the related configuration.

10 MSTP

Introduces the commands used for configuring STP and BRDU tunnel.

11 IP Routing-GR Overview

Introduces the commands used for displaying IP routing tables.

12 IPv4 Routing

Introduces the commands used for configuring IPv4 routing, static routing, RIP, OSPF, IS-IS, BGP, and route policy.

13 IPv6 Routing

Introduces the commands used for configuring IPv6 routing, static routing, RIPng, OSPFv3, IS-ISv6, and BGP4+.

14 IPv6

Introduces the commands used for configuring IPv6 application, IPv6 tunneling, and so on.

15 Multicast

Introduces the commands used for configuring  IGMP Snooping, MLD Snooping, multicast VLAN, multicast policy, IGMP, PIM-DM, PIM-SM, and MSDP.

16 802.1x-HABP-MAC Authentication

Introduces the commands used for 802.1x HABP and MAC address authentication related configurations.

17 AAA RADIUS HWTACACS

Introduces the commands used for AAA, RADIUS, HWTACACS, and the related configurations.

18 ARP

Introduces the commands used for ARP and the related configuration.

19 DHCP

Introduces the commands used for DHCP and the related configuration.

20 ACL

Introduces the commands used for IPv4&IPv6-based ACL and the related configuration.

21 QoS

Introduces the commands used for QoS and the related configuration.

22 Port Mirroring

Introduces the commands used for port mirroring and the related configuration.

23 Cluster Management

Introduces the commands used for Cluster and the related configuration.

24 UDP Helper

Introduces the commands used for UDP Helper and the related configuration.

25 SNMP-RMON

Introduces the commands used for the configuration to manage network devices through SNMP and RMON.

26 NTP

Introduces the commands used for NTP and the related configuration.

27 DNS

Introduces the commands used for DNS and the related configuration.

28 File System Management

Introduces the commands used for file system management.

29 Information Center

Introduces the commands used for the configuration to analyze and diagnose networks using the information center.

30 System Maintaining and Debugging

Introduces the commands used for daily system maintenance and debugging.

31 NQA

Introduces the commands used for NQA and the related configuration.

32 VRRP

Introduces the commands used for VRRP and the related configuration.

33 SSH

Introduces the commands used for SSH and the related configuration.

34 RRPP

Introduces the commands used for RRPP and the related configuration.

35 Port Security

Introduces the commands used for Port Security and the related configuration.

36 LLDP

Introduces the commands used for LLDP and the related configuration.

37 PoE

Introduces the commands used for PoE.

38 sFlow

Introduces the commands used for sFlow and the related configuration.

39 SSL-HTTPS

Introduces the commands used for SSL HTTPS and the related configuration.

40 PKI

Introduces the commands used for PKI and the related configuration.

41 Track

Introduces the commands used for Track and the related configuration.

42 Appendix

Lists all the commands described in this command manual in an alphabetic order. The parts and pages where the commands are described are also given.